Skip to content

docs_blackbox 4x_connect 4 wire laser

Jump to bottom
peter edited this page May 14, 2025 · 2 revisions

3.3.3 Connecting BlackBox 4X to a 24v Laser Module

jumper-relayopen.png TIP: Remove the Relay Mode jumper to prevent the relay from clicking on/off rapidly during laser operations

If you would like to use both a Laser, and the IoT relay, See: Connecting both an IOT Switching Relay for a Router, and a Laser, to the BlackBox

4-wire-laser.png

Clone this wiki locally