A2Geant4

A2 Geant4 simulation

Table of contents

• Release notes
• Installation
• Quick start
• Simulation commands
• Detector setup commands

Release notes

0.3.0

September 23, 2019

• support for GiBUU event-files
• using Pluto library for Pluto reader
• storing primary particle IDs for PID/Veto hits
• fixed some building issues

0.2.0

February 12, 2019

• generalized interface for input event-files
• support for Pluto event-files
• added tracked particles to metadata
• added new class for generic and specific solid targets (neutron skin)
• support for target shifts (S. Wagner)
• support for PID rotations
• support for Geant4 10.5

0.1.0

August 17, 2018

• fixed bug related to compiler optimizations for Geant4 >= 10.3 (S. Gardner)
• G4ExtrudedSolid-based CB-crystal implementation for Geant4 >= 10.4 (S. Gardner)
• informative metadata in output file
• nicer tracking progress information
• better support for different Geant4 releases

pre-0.1.0

• storage of primary particle IDs for CB/TAPS hits
• PID III (S. Kay)
• Cherenkov detector (F. Afzal)
• support for xz-compressed magnetic field maps
• Pizza detector
• support for cryogenic He-3 target
• possibility to disable MWPC hit storage

Installation

Dependencies

• Geant4 10.2/10.3/10.4/10.5
• ROOT 5 or 6
• CMake 3.3
• Optional: Qt 4 or 5
• Optional: Pluto 6 (only with ROOT 6, $PLUTOSYS needs to be set)

Installation

Installation of Geant4

Download the source tarball from https://geant4.web.cern.ch and extract it in a temporary directory:

cd /tmp
wget https://geant4-data.web.cern.ch/geant4-data/releases/geant4.10.04.p02.tar.gz
tar xvfz geant4.10.04.p02.tar.gz

Create a build directory (not inside the source directory) and run cmake. Set CMAKE_INSTALL_PREFIX to the final installation location and GEANT4_USE_QT to ON if you want to use the graphical user interface. Set GEANT4_INSTALL_DATA to ON so the large data packages will be downloaded automatically. Set N to the number of CPU cores to speed up the compilation process:

cd /tmp
mkdir build
cd build
cmake -DCMAKE_INSTALL_PREFIX=/opt/Geant4.10.04.02 -DGEANT4_INSTALL_DATA=ON -DGEANT4_USE_QT=ON /tmp/geant4.10.04.p02
make -jN
make install

Geant4 should now be installed in /opt/Geant4.10.04.02. Source the configuration script (geant4.sh for bash, geant4.csh for C shell) in your shell config file to set all the environment variables:

source /opt/Geant4.10.04.02/bin/geant4.sh

The temporary source and build directories can now be deleted. More details can be found in the official documentation.

Method 1: Getting the git master branch

cd /some/directory
git clone https://github.com/A2-Collaboration/A2Geant4.git
cd A2Geant4
mkdir build
cd build
cmake ..
make -j

Method 2: Install a release

Download a release, unpack and compile it:

cd /some/directory
wget https://github.com/A2-Collaboration/A2Geant4/archive/v0.1.0.tar.gz
tar xvfz v0.1.0.tar.gz
cd A2Geant4-0.1.0
mkdir build
cd build
cmake ..
make -j

Quick start

Interactive GUI mode

build/A2Geant4 --gui

Batch-mode

build/A2Geant4 --mac=macros/your_macro.mac --det=macros/DetectorSetup.mac --if=input.root --of=output.root

Known issues

• storage of primary particles only works if tracked particles are manually specified
• particle auto-tracking for mkin-files uses PDG stable attribute for now so many particles are not tracked
• Pluto: no primary vertex yet, more testing needed

Simulation commands

Physics

Command	Meaning
/A2/physics/Physics QGSP_BERT	select physics list
/A2/physics/ListPhysics	show available physics lists
/A2/physics/SetRegion CB	select region for tracking cut (CB, TAPS, TAPSV, PID, MWPC, Pizza)
/A2/physics/RegionCut 0.1 mm	set tracking cut for selected region
/A2/physics/CutGamma 0.1 mm	set tracking cut for photons
/A2/physics/CutEl 0.1 mm	set tracking cut for electrons
/A2/physics/CutPos 0.1 mm	set tracking cut for positrons
/A2/physics/CutProt 0.1 mm	set tracking cut for protons
/A2/physics/CutsAll 0.1 mm	set the same tracking cut for photons, electrons, positrons and protons

Generator

Command	Meaning
/A2/generator/Seed 3243434	set the seed of the random number generator
/A2/generator/NToBeTracked 3	set the number of particles to be tracked
/A2/generator/Track 1	set the index of a particle to be tracked
/A2/generator/InputFile input.root	set the event input file (sets mode to 2)
/A2/generator/Mode 1	select generator mode (0=G4 CLI generator, 1=phase-space, 2=file input, 3=overlap debug)
/A2/generator/SetTMin 200 MeV	minimum kinetic energy for a particle in the phase-space generator
/A2/generator/SetTMax 450 MeV	maximum kinetic energy for a particle in the phase-space generator
/A2/generator/SetThetaMin 0 deg	minimum polar angle for a particle in the phase-space generator
/A2/generator/SetThetaMax 120 deg	maximum polar angle for a particle in the phase-space generator
/A2/generator/SetBeamEnergy 0.2 GeV	energy of incoming beam (overwrites beam energy in event file)
/A2/generator/SetBeamXSigma 10 mm	x-sigma of incoming beam
/A2/generator/SetBeamYSigma 10 mm	y-sigma of incoming beam
/A2/generator/SetBeamDiameter 10 mm	beam-spot diameter on target
/A2/generator/SetTargetZ0 0 mm	target z-position
/A2/generator/SetTargetThick 0.4 mm	target length
/A2/generator/SetTargetRadius 0.5 cm	target radius
/A2/generator/SetSplitTheta 5 deg	theta split-angle for overlap generator

Event-saver

Command	Meaning
/A2/event/setOutputFile ouput.root	set the tracked-event output file
/A2/event/storePrimaries false	disable storage of primary particle indices

Detector setup commands

Crystal Ball

Command	Meaning
/A2/det/useCB 1	use CB (0=off, 1=on)
/A2/det/setHemiGap 0.4 0.4 -1 cm	upper air gap, lower air gap, geometry (>0: Prakhov, <0: old)
/A2/det/setCBCrystGeo extr	CB crystal geometry (trap=G4Trap, extr=G4ExtrudedSolid (default for Geant4 >= 10.4))

TAPS

Command	Meaning
/A2/det/useTAPS 1	use TAPS (0=off, 1=on)
/A2/det/setTAPSFile data/taps07.dat	location of TAPS geometry file (taps07.dat, taps.dat)
/A2/det/setTAPSZ 146.35 cm	distance target-TAPS
/A2/det/setTAPSN 384	number of TAPS crystals (384, 510)
/A2/det/setTAPSPbWO4Rings 2	number of PbWO4 rings (1, 2)

PID

Command	Meaning
/A2/det/usePID 2	use PID (0=off, 1=PID I, 2=PID II, 3=PID III)
/A2/det/setPIDZ 0. cm	PID z-shift
/A2/det/setPIDRotation 10 deg	PID rotation (0=old orientation, otherwise rotation with respect to element 0 @ 0 deg)

MWPC

Command	Meaning
/A2/det/useMWPC 2	use MWPC (0=off, 1=without anode wires, 2=with anode wires, 10/20: without/with wires but no readout)

Cherenkov

Command	Meaning
/A2/det/useCherenkov 0	use Cherenkov detector (0=off, 1=on)

TOF-walls

Command	Meaning
/A2/det/useTOF 0	use TOF-walls (0=off, 1=on)
/A2/det/setTOFFile data/TOF.par	location of TOF-walls geometry file

Pizza detector

Command	Meaning
/A2/det/usePizza 0	use the Pizza detector (0=off, 1=on)
/A2/det/setPizzaZ 162 cm	distance target-Pizza detector

Cryogenic Targets

Command	Meaning
/A2/det/useTarget Cryo	standard hydrogen target
/A2/det/useTarget Cryo2	narrower hydrogen target
/A2/det/useTarget CryoHe3	He3/He3 target
/A2/det/targetMaterial G4_lH2	hydrogen
/A2/det/targetMaterial A2_lD2	deuterium
/A2/det/targetMaterial A2_lHe3	He-3
/A2/det/targetMaterial A2_lHe4	He-4

Solid Targets

Command	Meaning
/A2/det/useTarget Solid	solid target (pre-2007 experiments)
/A2/det/useTarget Solid_Generic	generic solid target
/A2/det/useTarget Solid_Oct_18	solid target for October 2018 experiment
/A2/det/useTarget Solid_Jan_19	solid target for January 2019 experiment
/A2/det/targetMaterial G4_Li	Lithium
/A2/det/targetMaterial G4_GRAPHITE	Graphite
/A2/det/targetMaterial G4_Ca	Calcium
/A2/det/targetMaterial G4_Pb	Lead

Polarized Targets

Command	Meaning
/A2/det/useTarget Polarized	solid target
/A2/det/targetMaterial A2_HeButanol	Butanol/Helium mix
/A2/det/targetMaterial A2_HeDButanol	D-Butanol/Helium mix
/A2/det/targetMagneticCoils Solenoidal	longitudinally polarized target
/A2/det/targetMagneticCoils Saddle	transversely polarized target
/A2/det/setTargetMagneticFieldMap map.dat.xz	magnetic field map (data/wouter_field_map.dat.xz, data/field_map_jul_13_pos.dat.xz)

General Target Options

Command	Meaning
/A2/det/setTargetLength 2 cm	set target length (not supported by all targets)
/A2/det/setTargetRadius 2 cm	set target radius (not supported by all targets)
/A2/det/setTargetZ 0. cm	target z-shift