FCB1010 Azerty

<!-- FCB-1010 <-> Azerty Keyboard Mappings -->

<!-- The pedals on the FCB controler trigger the same loops as:
          * (first layer:)  the q-z-s-e-d-r-f-t-g keys, and
          * (second layer:) the h-u-j-i-k-o-l-p-m keys.
      This makes sense on an azerty keyboard, since the keys are then ordered
          in the same way as the controler's pedals. Loops can be recorded and
          accessed either through the pedals or through the keyboard.
      The pedals are set to send "program change" messages.
      This is more or less a factory default.
      It is much easier to configure Freewheeling than the FCB controler.
      Doing it letter by letter is quick, although not very elegant.
      Pedal 10 is not assigned since I use it for something else
          (cancel/delete last recorded loop) -->

<!-- First layer. LED shows 00. -->
<binding input="midiprogramchange" conditions="programval=0"
  output="trigger-loop" parameters="loopid=113"/> <!-- Q -->
<binding input="midiprogramchange" conditions="programval=5"
  output="trigger-loop" parameters="loopid=122"/> <!-- Z -->
<binding input="midiprogramchange" conditions="programval=1"
  output="trigger-loop" parameters="loopid=115"/> <!-- S -->
<binding input="midiprogramchange" conditions="programval=6"
  output="trigger-loop" parameters="loopid=101"/> <!-- E -->
<binding input="midiprogramchange" conditions="programval=2"
  output="trigger-loop" parameters="loopid=100"/> <!-- D -->
<binding input="midiprogramchange" conditions="programval=7"
  output="trigger-loop" parameters="loopid=114"/> <!-- R -->
<binding input="midiprogramchange" conditions="programval=3"
  output="trigger-loop" parameters="loopid=102"/> <!-- F -->
<binding input="midiprogramchange" conditions="programval=8"
  output="trigger-loop" parameters="loopid=116"/> <!-- T -->
<binding input="midiprogramchange" conditions="programval=4"
  output="trigger-loop" parameters="loopid=103"/> <!-- G -->

<!-- Second layer, accessed by pressing the "up" pedal". LED shows "01". -->
<binding input="midiprogramchange" conditions="programval=10"
  output="trigger-loop" parameters="loopid=104"/> <!-- H -->
<binding input="midiprogramchange" conditions="programval=15"
  output="trigger-loop" parameters="loopid=117"/> <!-- U -->
<binding input="midiprogramchange" conditions="programval=11"
  output="trigger-loop" parameters="loopid=106"/> <!-- J -->
<binding input="midiprogramchange" conditions="programval=16"
  output="trigger-loop" parameters="loopid=105"/> <!-- I -->
<binding input="midiprogramchange" conditions="programval=12"
  output="trigger-loop" parameters="loopid=107"/> <!-- K -->
<binding input="midiprogramchange" conditions="programval=17"
  output="trigger-loop" parameters="loopid=111"/> <!-- O -->
<binding input="midiprogramchange" conditions="programval=13"
  output="trigger-loop" parameters="loopid=108"/> <!-- L -->
<binding input="midiprogramchange" conditions="programval=18"
  output="trigger-loop" parameters="loopid=112"/> <!-- P -->
<binding input="midiprogramchange" conditions="programval=14"
  output="trigger-loop" parameters="loopid=109"/> <!-- M -->