Skip to content

Viewer CC drift correction

Jump to bottom
Christian Sieben edited this page Aug 9, 2018 · 3 revisions

We implemented a simple viewer to visually check the localization output.

  • Input formats are ThunderStorm and "splineFitter", i.e. the output data generated by the splineFitter module.

  • This module further allows to filter the localization data using common filtering parameters (frame, sigma, photons, uncertainty).

  • The RCC drift correction was developed by the Huang lab and is available via their lab website.

Wang, Yina, et al. "Localization events-based sample drift correction for localization microscopy with redundant cross-correlation algorithm." Optics express 22.13 (2014): 15982-15991.

Select Localize/Register > Viewer / CC drift correction from the SPARTAN menu.

Locs_Viewer

  • Select the input data format and navigate to the localization file. Default format: ThunderStorm.
  • Select the drift correction method (RCC, DCC, MCC). Default: RCC.
  • Run drift correction. The solver iterations are displayed in the MatLab main window. A new figure will show the detected drift for the xy axis.

Drift Trajectory

  • Filter the data according to the parameters: frame, sigma, photons, uncertainty.
  • Visualize the localization (Gaussian blurred 2D histogram) after selecting a suitable pixel size.

Rendered image before drift correction

Before

Rendered image after drift correction

After

Localize/Register

Particles

Volume

SMLM Simulator

Help

Clone this wiki locally