NOTE: This guide describes installation of SINGLE NODE OPENSTACK.
git clone https://github.com/dmitry-teselkin/havana-from-packages.git
In general, installation steps are the same as in the official guide OpenStack Basic Installation Guide for Ubuntu 12.04 (LTS) and Debian Wheezy.
There are a numerous notes, however. Some of them fixes bugs and typos, and the other - correct the guide to be applicable to Havana release.
- Ubuntu Server 12.04.3 x64
Scripted
- Configure network in /etc/network/interfaces
- Run the script
>$ sudo ./configure-system.sh
Manual
- Configure network in /etc/network/interfaces
- Add the ubuntu-cloud-keyring package:
># apt-get install ubuntu-cloud-keyring
- Add CloudArchive repositories into apt sources /etc/apt/sources.list.d/cloud-archive.list
# The primary updates archive that users should be using deb http://ubuntu-cloud.archive.canonical.com/ubuntu precise-updates/havana main # Public -proposed archive mimicking the SRU process for extended testing. # Packages should bake here for at least 7 days. #deb http://ubuntu-cloud.archive.canonical.com/ubuntu precise-proposed/havana main
- Update
># apt-get update
- Add to /etc/sysctl.conf
net.ipv4.ip_forward = 1 net.ipv4.conf.all.forwarding = 1 net.ipv4.conf.all.rp_filter = 0 net.ipv4.conf.default.rp_filter = 0
- Restart networking
/etc/init.d/networking restart
- Apply the sysctl settings:
># sysctl -e -p /etc/sysctl.conf
- Install ntp
># apt-get install -y ntp
First, configure the ./openrc file.
Scripted
>$ sudo ./install-mysql.sh
>$ sudo ./initialize-mysql.sh
Manual
See links below:
Scripted
>$ sudo ./install-rabbitmq.sh
Manual
See links below:
Scripted
>$ sudo ./install-keystone.sh
>$ sudo ./configure-keystone.sh
>$ sudo ./initialize-keystone.sh
Manual
See links below:
Scripted
>$ sudo ./install-glance.sh
>$ sudo ./configure-glance.sh
>$ sudo ./initialize-glance.sh
Manual
See links below:
Scripted
>$ sudo ./install-cinder.sh
>$ sudo ./configure-cinder.sh
Manual
See links below:
Notes
- I use virtual device for block storage service. The steps below show required actions:
># dd if=/dev/zero of=/opt/cinder-volumes.img bs=100 count=100M ># losetup /dev/loop0 /opt/cinder-volumes.img
># sfdisk /dev/loop0 << EOF ,,8e,, EOF
># pvcreate /dev/loop0 ># vgcreate cinder-volumes /dev/loop0
Scripted
>$ sudo ./install-dashboard.sh
Manual
See links below:
Scripted
>$ sudo ./install-heat.sh
>$ sudo ./configure-heat.sh
Manual
- Install Heat packages
># apt-get -y install heat-api heat-api-cfn heat-api-cloudwatch \
heat-common heat-engine python-heat python-heatclient
- Configure /etc/heat/api-paste.ini
--- api-paste.ini.orig 2013-10-08 10:07:11.672155268 -0400 +++ api-paste.ini 2013-10-08 10:46:02.708196472 -0400 @@ -77,6 +77,13 @@ # Auth middleware that validates token against keystone [filter:authtoken] paste.filter_factory = heat.common.auth_token:filter_factory +auth_host = 127.0.0.1 +auth_port = 35357 +auth_protocol = http +auth_uri = http://127.0.0.1:5000/v2.0 +admin_tenant_name = admin +admin_user = admin +admin_password = swordfish # Auth middleware that validates username/password against keystone [filter:authpassword]
- Configure /etc/heat/heat.conf
--- heat.conf.orig 2013-10-08 10:08:00.071029682 -0400 +++ heat.conf 2013-10-08 10:35:13.874480898 -0400 @@ -137,10 +137,12 @@ # Print debugging output (set logging level to DEBUG instead # of default WARNING level). (boolean value) #debug=false +debug=true # Print more verbose output (set logging level to INFO instead # of default WARNING level). (boolean value) #verbose=false +verbose=true # Log output to standard error (boolean value) #use_stderr=true @@ -203,6 +205,7 @@ # (Optional) The base directory used for relative --log-file # paths (string value) #log_dir=<None> +log_dir=/var/log/heat # Use syslog for logging. (boolean value) #use_syslog=false
Scripted
>$ sudo ./install-neutron.sh
- Configure OpenVSwitch - http://docs.openstack.org/grizzly/basic-install/apt/content/basic-install_network.html#basic-install_network-services
>$ sudo ./configure-neutron.sh
Manual
See links below:
- http://docs.openstack.org/grizzly/basic-install/apt/content/basic-install_controller.html#basic-install_controller-quantum
- http://docs.openstack.org/grizzly/basic-install/apt/content/basic-install_network.html#basic-install_network-services
- http://docs.openstack.org/grizzly/basic-install/apt/content/basic-install_compute.html#basic-install_compute-quantum
Scripted
>$ sudo ./install-compute.sh
>$ sudo./configure-compute.sh
Manual
See links below:
- http://docs.openstack.org/grizzly/basic-install/apt/content/basic-install_controller.html#basic-install_controller-nova
- http://docs.openstack.org/grizzly/basic-install/apt/content/basic-install_compute.html#basic-install_compute-nova
Notes
check the --libvirt-type if it is "kvm" then change it to --libvirt-type=qemu in /etc/nova/nova-compute.conf and reboot the machine your bug will get resolved