Release v1.0.0-rc2

v1.0.0-rc2

Welcome to the v1.0.0-rc2 release of Spiderpool!
Compared with version:v1.0.0-rc1, version:v1.0.0-rc2 has the following updates.

---

New Feature

• spiderpool-agent: support to configure the sysctl config for node : PR 3772

• doc: ai with macvlan : PR 3870

• agent set rp_filter to 0 for the each node : PR 3898

• Support ipv6 subnet with CIDR mask bigger than 64 : PR 3804

• Add chainCNI support for spidermultusconfig : PR 3918

• Add a pod mutating webhook to auto inject the pod network resources : PR 4179

• Add a flag to configure an link-local address to veth0 for istio : PR 4206

• Add RDAM metrics : PR 4112

---

Fix

• pod launched by unexpected CNI when the health checking of the agent fails and multus.conf is lost : PR 3758

• rbac: remove permissions for patch/update nodes and webhook resources : PR 3880

• fix: Spiderpool GC incorrect IP address during statefulset Pod scale up/down, causing IP conflict : PR 3778

• coordinator should only set rp_filter for pod but not the node : PR 3906

• coordinator: fix wrong policy route when there is more than 1 secondary nics : PR 3873

• Update GOMAXPROCS configuration : PR 4013

• fix: cannot uninstall spiderpool when sriovOperatorConfig is installed : PR 3925

• Fix panic when create spidermultusconfig with nil podRPFilter in validate webhook : PR 4062

• Fix wrong validate for unicast podMACPrefix when creating spiderMultusConfig : PR 4098

• fix: avoid failures when cleaning up spiderpool resources due to resourceVersion conflicts. : PR 4130

• fix: optimize the cleanup code judgment of NotFound resources : PR 4156

• fix: same-name conflict check specified by multus.spidernet.io/cr-name : PR 4168

---

Total

Pull request number: 84

Commits

Release v0.9.7

v0.9.7

---

Fix

• Fix panic when create spidermultusconfig with nil podRPFilter in validate webhook : PR 4078

• Fix wrong validate for unicast podMACPrefix when creating spiderMultusConfig : PR 4108

---

Total

Pull request number: 6

Commits

Release v0.9.6

v0.9.6

---

Fix

• Fix：the chart value tuneSysctlConfig does not work : PR 3988

• Update GOMAXPROCS configuration : PR 4014

---

Total

Pull request number: 3

Commits

Release v0.8.8

v0.8.8

---

New Feature

• spiderpool-agent: support to configure the sysctl config : PR 3840

• agent can be set rp_filter to 0 for the each node : PR 3913

---

Fix

• Fix: Statefulset pod should change IP when recreating with a changed pool in annotation : PR 3674

• fix: fail to access NodePort when pod owning multiple network cards : PR 3815

• pod launched by unexpected CNI when the health checking of the agent fails and multus.conf is lost : PR 3813

• init-pod: fix installtion block for agent pods can't running : PR 3810

• [cherry-pick] fix: Spiderpool GC incorrect IP address during statefulset Pod scale up/down, causing IP conflict : PR 3914

• coordinator: Fix error policy routing table when pod has multi nics : PR 3986

• coordinator should only set rp_filter for pod not the node : PR 3970

• Fix：the chart value tuneSysctlConfig does not work : PR 3991

---

Total

Pull request number: 18

Commits

Release v0.9.5

v0.9.5

---

New Feature

• spiderpool-agent: support to configure the sysctl config : PR 3842

• agent can be set rp_filter to 0 for the each node : PR 3907

• Add chainCNI support for spidermultusconfig : PR 3973

---

Fix

• Fix: Statefulset pod should change IP when recreating with a changed pool in annotation : PR 3675

• fix: fail to access NodePort when pod owning multiple network card : PR 3814

• pod launched by unexpected CNI when the health checking of the agent fails and multus.conf is lost : PR 3812

• init-pod: fix installtion block for agent pods can't running : PR 3811

• fix: Spiderpool GC incorrect IP address during statefulset Pod scale up/down, causing IP conflict : PR 3912

• coordinator should only set rp_filter for pod not the node : PR 3968

• coordinator: Fix error policy routing table when pod has multi nics : PR 3969

---

Total

Pull request number: 22

Commits

Release v1.0.0-rc1

v1.0.0-rc1

Welcome to the v1.0.0-rc1 release of Spiderpool!
Compared with version:v1.0.0-rc0, version:v1.0.0-rc1 has the following updates.

---

New Feature

• fix(charts): Remove unnecessary sensitive permissions for DaemonSet agent and Pod init : PR 3522

• update crds for spiderpool dra feature : PR 3527

• spiderclaimparameter: add webhook to verify the create and update : PR 3668

• update version of CNI plugins : PR 3733

• update sriov-operator version to v1.3.0 : PR 3716

---

Changed Feature

• coordinator: Use ARP to detect the gateway rather than ICMP : PR 3584

---

Fix

• DRA: fix error start of agent : PR 3504

• RBAC: avoiding too high permissions leading to potential CVE risks : PR 3608

• Fix: it is so slow to create a Pod requiring IP from a super big CIDR : PR 3583

• add link-local IP to veth0 for istio : PR 3588

• Fix: Statefulset pod should change IP when recreating with a changed pool in annotation : PR 3669

• Optimize clean job to use host network : PR 3692

• fix: fail to access NodePort when pod owning multiple network cards : PR 3686

• Optimize clean scripts : PR 3706

• fix: Missing GLIBC dynamic dependency makes ovs binary unavailable : PR 3752

• remove CRD installed by sriov-network-operator when uninstalling : PR 3726

• init-pod: support helm wait and fix installation block when agent pods fails to run : PR 3732

---

Totoal

Pull request number: 85

Commits

Release v0.8.7

v0.8.7

---

Bug Fix

• coordinator: ensure hijickRoute's gw is from hostIPRouteForPod : PR 3363

• add link-local IP to veth0 for istio : PR 3622

• fix: it is so slow to create a Pod requiring IP from a super big CIDR : PR 3628

Changed Feature

• coordinator: Use arping to detect the gateway rather than ICMP : PR 3652

---

Totoal

Pull request number: 12

Commits

Release v0.9.4

v0.9.4

---

Bug Fix

• fix: it is so slow to create a Pod requiring IP from a super big CIDR : PR 3629
• add link-local IP to veth0 for redirect action of the istio : PR 3623

Changed Feature

• coordinator: Use arping to detect the gateway if reachable: PR 3584

---

Totoal

Pull request number: 16

Commits

Release v1.0.0-rc0

v1.0.0-rc0

Welcome to the v1.0.0-rc0 release of Spiderpool!
Compared with version:v0.9.3, version:v1.0.0-rc0 has the following updates.

---

New Feature

• subnet feature: support to turn on or off the feature of managing automatic-ippool : PR 3241

• Rework spidercoordinator informer to update pod and service cidr : PR 3249

• chart: Support configure ifNames for rdmaSharedDevicePlugin : PR 3335

• feature: support wildcard match for IPPool : PR 3262

• feature: run a clean-up job when uninstalling : PR 3339

• DRA: Integrates with DRA and CDI : PR 3329

---

Changed Feature

• Support getting serviceCIDR from spec.Containers[0].Args of kube-controller-manager Pod : PR 3243

• Fix panic in spidercoordinator informer : PR 3269

• spidercoordinator: Enhance the edge case : PR 3284

• spidermultusconfig: add missing filed for generateCoordinatorCNIConf : PR 3283

• Spidercoordinator: sync kubeadm-config event to trigger the status update : PR 3291

• coordinator: rework GetDefaultRouteInterface to get pod's default route nic : PR 3302

• coordinator: ensure hijickRoute's gw is from hostIPRouteForPod : PR 3358

---

Totoal

Pull request number: 47

Commits

Release v0.9.3

v0.9.3

---

Changed Feature

• coordinator: rework GetDefaultRouteInterface to get pod's default route nic : PR 3307

• coordinator: ensure hijickRoute's gw is from hostIPRouteForPod : PR 3364

---

Totoal

Pull request number: 5

Commits