raspberrypilearning · majamanojlovic · Feb 15, 2023 · Feb 15, 2023 · Feb 15, 2023 · Feb 15, 2023
diff --git a/ar-SA/images/pico-top-plug.png b/ar-SA/images/pico-top-plug.png
diff --git a/ar-SA/images/plug-in-pico.png b/ar-SA/images/plug-in-pico.png
diff --git a/ar-SA/images/search-picozero.png b/ar-SA/images/search-picozero.png
diff --git a/ar-SA/images/tools-manage-packages.png b/ar-SA/images/tools-manage-packages.png
diff --git a/ar-SA/meta.yml b/ar-SA/meta.yml
@@ -0,0 +1,10 @@
+title: Set up picozero
+hero_image: images/banner.png
+description: Install the picozero package on your Raspberry Pi Pico with Thonny.
+version: 4
+listed: false
+copyedit: false
+last_tested: "2022-05-19"
+steps:
+  - 
+    title: Set up picozero
diff --git a/ar-SA/step_1.md b/ar-SA/step_1.md
@@ -0,0 +1,30 @@
+## Plug in your Raspberry Pi Pico
+
+Connect your Rasberry Pi Pico to the computer you will use to program it.
+
+![USB cable plugged in to Raspberry Pi Pico.](images/pico-top-plug.png)
+
+![USB cable plugged in to computer.](images/plug-in-pico.png)
+
+## Install or update MicroPython
+
++ Open the Thonny editor
++ Look at the bottom right-hand corner
++ Check it says 'MicroPython (Raspberry Pi Pico)'
++ If it doesn't then select 'MicroPython (Raspberry Pi Pico)'
++ You might get prompted to install the firmware.
+
+## Add picozero
+
++ Go to 'Tools > Manage packages'
++ Type 'picozero' into the search bar
++ Click 'Search on PyPI'
+
+![Thonny install packages window with search box.](images/search-picozero.png)
+
+ + Click on 'picozero' in the search results
+ + Click on 'install'
+
+![picozero in search results.](images/tools-manage-packages.png)
+
+See the [Introduction to the Raspberry Pi Pico Guide](https://projects.raspberrypi.org/en/pathways/pico-intro){:target="_blank"} for more information. 
diff --git a/cs-CZ/images/pico-top-plug.png b/cs-CZ/images/pico-top-plug.png
diff --git a/cs-CZ/images/plug-in-pico.png b/cs-CZ/images/plug-in-pico.png
diff --git a/cs-CZ/images/search-picozero.png b/cs-CZ/images/search-picozero.png
diff --git a/cs-CZ/images/tools-manage-packages.png b/cs-CZ/images/tools-manage-packages.png
diff --git a/cs-CZ/meta.yml b/cs-CZ/meta.yml
@@ -0,0 +1,10 @@
+title: Set up picozero
+hero_image: images/banner.png
+description: Install the picozero package on your Raspberry Pi Pico with Thonny.
+version: 4
+listed: false
+copyedit: false
+last_tested: "2022-05-19"
+steps:
+  - 
+    title: Set up picozero
diff --git a/cs-CZ/step_1.md b/cs-CZ/step_1.md
@@ -0,0 +1,30 @@
+## Plug in your Raspberry Pi Pico
+
+Connect your Rasberry Pi Pico to the computer you will use to program it.
+
+![USB cable plugged in to Raspberry Pi Pico.](images/pico-top-plug.png)
+
+![USB cable plugged in to computer.](images/plug-in-pico.png)
+
+## Install or update MicroPython
+
++ Open the Thonny editor
++ Look at the bottom right-hand corner
++ Check it says 'MicroPython (Raspberry Pi Pico)'
++ If it doesn't then select 'MicroPython (Raspberry Pi Pico)'
++ You might get prompted to install the firmware.
+
+## Add picozero
+
++ Go to 'Tools > Manage packages'
++ Type 'picozero' into the search bar
++ Click 'Search on PyPI'
+
+![Thonny install packages window with search box.](images/search-picozero.png)
+
+ + Click on 'picozero' in the search results
+ + Click on 'install'
+
+![picozero in search results.](images/tools-manage-packages.png)
+
+See the [Introduction to the Raspberry Pi Pico Guide](https://projects.raspberrypi.org/en/pathways/pico-intro){:target="_blank"} for more information. 
diff --git a/cy-GB/images/pico-top-plug.png b/cy-GB/images/pico-top-plug.png
diff --git a/cy-GB/images/plug-in-pico.png b/cy-GB/images/plug-in-pico.png
diff --git a/cy-GB/images/search-picozero.png b/cy-GB/images/search-picozero.png
diff --git a/cy-GB/images/tools-manage-packages.png b/cy-GB/images/tools-manage-packages.png
diff --git a/cy-GB/meta.yml b/cy-GB/meta.yml
@@ -0,0 +1,10 @@
+title: Set up picozero
+hero_image: images/banner.png
+description: Install the picozero package on your Raspberry Pi Pico with Thonny.
+version: 4
+listed: false
+copyedit: false
+last_tested: "2022-05-19"
+steps:
+  - 
+    title: Set up picozero
diff --git a/cy-GB/step_1.md b/cy-GB/step_1.md
@@ -0,0 +1,30 @@
+## Plug in your Raspberry Pi Pico
+
+Connect your Rasberry Pi Pico to the computer you will use to program it.
+
+![USB cable plugged in to Raspberry Pi Pico.](images/pico-top-plug.png)
+
+![USB cable plugged in to computer.](images/plug-in-pico.png)
+
+## Install or update MicroPython
+
++ Open the Thonny editor
++ Look at the bottom right-hand corner
++ Check it says 'MicroPython (Raspberry Pi Pico)'
++ If it doesn't then select 'MicroPython (Raspberry Pi Pico)'
++ You might get prompted to install the firmware.
+
+## Add picozero
+
++ Go to 'Tools > Manage packages'
++ Type 'picozero' into the search bar
++ Click 'Search on PyPI'
+
+![Thonny install packages window with search box.](images/search-picozero.png)
+
+ + Click on 'picozero' in the search results
+ + Click on 'install'
+
+![picozero in search results.](images/tools-manage-packages.png)
+
+See the [Introduction to the Raspberry Pi Pico Guide](https://projects.raspberrypi.org/en/pathways/pico-intro){:target="_blank"} for more information. 
diff --git a/el-GR/images/pico-top-plug.png b/el-GR/images/pico-top-plug.png
diff --git a/el-GR/images/plug-in-pico.png b/el-GR/images/plug-in-pico.png
diff --git a/el-GR/images/search-picozero.png b/el-GR/images/search-picozero.png
diff --git a/el-GR/images/tools-manage-packages.png b/el-GR/images/tools-manage-packages.png
diff --git a/el-GR/meta.yml b/el-GR/meta.yml
@@ -0,0 +1,10 @@
+title: Set up picozero
+hero_image: images/banner.png
+description: Install the picozero package on your Raspberry Pi Pico with Thonny.
+version: 4
+listed: false
+copyedit: false
+last_tested: "2022-05-19"
+steps:
+  - 
+    title: Set up picozero
diff --git a/el-GR/step_1.md b/el-GR/step_1.md
@@ -0,0 +1,30 @@
+## Plug in your Raspberry Pi Pico
+
+Connect your Rasberry Pi Pico to the computer you will use to program it.
+
+![USB cable plugged in to Raspberry Pi Pico.](images/pico-top-plug.png)
+
+![USB cable plugged in to computer.](images/plug-in-pico.png)
+
+## Install or update MicroPython
+
++ Open the Thonny editor
++ Look at the bottom right-hand corner
++ Check it says 'MicroPython (Raspberry Pi Pico)'
++ If it doesn't then select 'MicroPython (Raspberry Pi Pico)'
++ You might get prompted to install the firmware.
+
+## Add picozero
+
++ Go to 'Tools > Manage packages'
++ Type 'picozero' into the search bar
++ Click 'Search on PyPI'
+
+![Thonny install packages window with search box.](images/search-picozero.png)
+
+ + Click on 'picozero' in the search results
+ + Click on 'install'
+
+![picozero in search results.](images/tools-manage-packages.png)
+
+See the [Introduction to the Raspberry Pi Pico Guide](https://projects.raspberrypi.org/en/pathways/pico-intro){:target="_blank"} for more information. 
diff --git a/en-US/images/pico-top-plug.png b/en-US/images/pico-top-plug.png
diff --git a/en-US/images/plug-in-pico.png b/en-US/images/plug-in-pico.png
diff --git a/en-US/images/search-picozero.png b/en-US/images/search-picozero.png
diff --git a/en-US/images/tools-manage-packages.png b/en-US/images/tools-manage-packages.png
diff --git a/en-US/meta.yml b/en-US/meta.yml
@@ -0,0 +1,10 @@
+title: Set up picozero
+hero_image: images/banner.png
+description: Install the picozero package on your Raspberry Pi Pico with Thonny.
+version: 4
+listed: false
+copyedit: false
+last_tested: "2022-05-19"
+steps:
+  - 
+    title: Set up picozero
diff --git a/en-US/step_1.md b/en-US/step_1.md
@@ -0,0 +1,30 @@
+## Plug in your Raspberry Pi Pico
+
+Connect your Rasberry Pi Pico to the computer you will use to program it.
+
+![USB cable plugged in to Raspberry Pi Pico.](images/pico-top-plug.png)
+
+![USB cable plugged in to computer.](images/plug-in-pico.png)
+
+## Install or update MicroPython
+
++ Open the Thonny editor
++ Look at the bottom right-hand corner
++ Check it says 'MicroPython (Raspberry Pi Pico)'
++ If it doesn't then select 'MicroPython (Raspberry Pi Pico)'
++ You might get prompted to install the firmware.
+
+## Add picozero
+
++ Go to 'Tools > Manage packages'
++ Type 'picozero' into the search bar
++ Click 'Search on PyPI'
+
+![Thonny install packages window with search box.](images/search-picozero.png)
+
+ + Click on 'picozero' in the search results
+ + Click on 'install'
+
+![picozero in search results.](images/tools-manage-packages.png)
+
+See the [Introduction to the Raspberry Pi Pico Guide](https://projects.raspberrypi.org/en/pathways/pico-intro){:target="_blank"} for more information. 
diff --git a/es-LA/images/pico-top-plug.png b/es-LA/images/pico-top-plug.png
diff --git a/es-LA/images/plug-in-pico.png b/es-LA/images/plug-in-pico.png
diff --git a/es-LA/images/search-picozero.png b/es-LA/images/search-picozero.png
diff --git a/es-LA/images/tools-manage-packages.png b/es-LA/images/tools-manage-packages.png
diff --git a/es-LA/meta.yml b/es-LA/meta.yml
@@ -0,0 +1,10 @@
+title: Set up picozero
+hero_image: images/banner.png
+description: Install the picozero package on your Raspberry Pi Pico with Thonny.
+version: 4
+listed: false
+copyedit: false
+last_tested: "2022-05-19"
+steps:
+  - 
+    title: Set up picozero
diff --git a/es-LA/step_1.md b/es-LA/step_1.md
@@ -0,0 +1,30 @@
+## Plug in your Raspberry Pi Pico
+
+Connect your Rasberry Pi Pico to the computer you will use to program it.
+
+![USB cable plugged in to Raspberry Pi Pico.](images/pico-top-plug.png)
+
+![USB cable plugged in to computer.](images/plug-in-pico.png)
+
+## Install or update MicroPython
+
++ Open the Thonny editor
++ Look at the bottom right-hand corner
++ Check it says 'MicroPython (Raspberry Pi Pico)'
++ If it doesn't then select 'MicroPython (Raspberry Pi Pico)'
++ You might get prompted to install the firmware.
+
+## Add picozero
+
++ Go to 'Tools > Manage packages'
++ Type 'picozero' into the search bar
++ Click 'Search on PyPI'
+
+![Thonny install packages window with search box.](images/search-picozero.png)
+
+ + Click on 'picozero' in the search results
+ + Click on 'install'
+
+![picozero in search results.](images/tools-manage-packages.png)
+
+See the [Introduction to the Raspberry Pi Pico Guide](https://projects.raspberrypi.org/en/pathways/pico-intro){:target="_blank"} for more information. 
diff --git a/fr-FR/images/pico-top-plug.png b/fr-FR/images/pico-top-plug.png
diff --git a/fr-FR/images/plug-in-pico.png b/fr-FR/images/plug-in-pico.png
diff --git a/fr-FR/images/search-picozero.png b/fr-FR/images/search-picozero.png
diff --git a/fr-FR/images/tools-manage-packages.png b/fr-FR/images/tools-manage-packages.png
diff --git a/fr-FR/meta.yml b/fr-FR/meta.yml
@@ -0,0 +1,10 @@
+title: Configurer picozero
+hero_image: images/banner.png
+description: Installer le module picozero sur ton Raspberry Pi Pico avec Thonny.
+version: 4
+listed: false
+copyedit: false
+last_tested: "2022-05-19"
+steps:
+  - 
+    title: Configurer picozero
diff --git a/fr-FR/step_1.md b/fr-FR/step_1.md
@@ -0,0 +1,30 @@
+## Brancher ton Raspberry Pi Pico
+
+Connecte ton Raspberry Pi Pico à l'ordinateur que tu utiliseras pour le programmer.
+
+![Câble USB branché sur Raspberry Pi Pico.](images/pico-top-plug.png)
+
+![Câble USB branché à l'ordinateur.](images/plug-in-pico.png)
+
+## Installer ou mettre à jour MicroPython
+
++ Ouvre l'éditeur Thonny
++ Regarde en bas à droite
++ Vérifie qu'il indique "MicroPython (Raspberry Pi Pico)"
++ Si ce n'est pas le cas, sélectionne "MicroPython (Raspberry Pi Pico)"
++ Tu seras peut-être invité à installer le micrologiciel.
+
+## Ajouter picozero
+
++ Va dans 'Outils > Gérer les paquets'
++ Tape 'picozero' dans la barre de recherche
++ Clique sur 'Rechercher sur PyPI'
+
+![Fenêtre d'installation des packages Thonny avec champ de recherche.](images/search-picozero.png)
+
+ + Clique sur 'picozero' dans les résultats de la recherche
+ + Clique sur 'installer'
+
+![picozero dans les résultats de recherche.](images/tools-manage-packages.png)
+
+Consulte l' [Introduction au guide Raspberry Pi Pico](https://projects.raspberrypi.org/en/pathways/pico-intro) pour plus d'informations. 
diff --git a/hi-IN/images/pico-top-plug.png b/hi-IN/images/pico-top-plug.png
diff --git a/hi-IN/images/plug-in-pico.png b/hi-IN/images/plug-in-pico.png
diff --git a/hi-IN/images/search-picozero.png b/hi-IN/images/search-picozero.png
diff --git a/hi-IN/images/tools-manage-packages.png b/hi-IN/images/tools-manage-packages.png
diff --git a/hi-IN/meta.yml b/hi-IN/meta.yml
@@ -0,0 +1,10 @@
+title: Set up picozero
+hero_image: images/banner.png
+description: Install the picozero package on your Raspberry Pi Pico with Thonny.
+version: 4
+listed: false
+copyedit: false
+last_tested: "2022-05-19"
+steps:
+  - 
+    title: Set up picozero
diff --git a/hi-IN/step_1.md b/hi-IN/step_1.md
@@ -0,0 +1,30 @@
+## Plug in your Raspberry Pi Pico
+
+Connect your Rasberry Pi Pico to the computer you will use to program it.
+
+![USB cable plugged in to Raspberry Pi Pico.](images/pico-top-plug.png)
+
+![USB cable plugged in to computer.](images/plug-in-pico.png)
+
+## Install or update MicroPython
+
++ Open the Thonny editor
++ Look at the bottom right-hand corner
++ Check it says 'MicroPython (Raspberry Pi Pico)'
++ If it doesn't then select 'MicroPython (Raspberry Pi Pico)'
++ You might get prompted to install the firmware.
+
+## Add picozero
+
++ Go to 'Tools > Manage packages'
++ Type 'picozero' into the search bar
++ Click 'Search on PyPI'
+
+![Thonny install packages window with search box.](images/search-picozero.png)
+
+ + Click on 'picozero' in the search results
+ + Click on 'install'
+
+![picozero in search results.](images/tools-manage-packages.png)
+
+See the [Introduction to the Raspberry Pi Pico Guide](https://projects.raspberrypi.org/en/pathways/pico-intro){:target="_blank"} for more information. 
diff --git a/hr-HR/images/pico-top-plug.png b/hr-HR/images/pico-top-plug.png
diff --git a/hr-HR/images/plug-in-pico.png b/hr-HR/images/plug-in-pico.png
diff --git a/hr-HR/images/search-picozero.png b/hr-HR/images/search-picozero.png
diff --git a/hr-HR/images/tools-manage-packages.png b/hr-HR/images/tools-manage-packages.png
diff --git a/hr-HR/meta.yml b/hr-HR/meta.yml
@@ -0,0 +1,10 @@
+title: Set up picozero
+hero_image: images/banner.png
+description: Install the picozero package on your Raspberry Pi Pico with Thonny.
+version: 4
+listed: false
+copyedit: false
+last_tested: "2022-05-19"
+steps:
+  - 
+    title: Set up picozero
diff --git a/hr-HR/step_1.md b/hr-HR/step_1.md
@@ -0,0 +1,30 @@
+## Plug in your Raspberry Pi Pico
+
+Connect your Rasberry Pi Pico to the computer you will use to program it.
+
+![USB cable plugged in to Raspberry Pi Pico.](images/pico-top-plug.png)
+
+![USB cable plugged in to computer.](images/plug-in-pico.png)
+
+## Install or update MicroPython
+
++ Open the Thonny editor
++ Look at the bottom right-hand corner
++ Check it says 'MicroPython (Raspberry Pi Pico)'
++ If it doesn't then select 'MicroPython (Raspberry Pi Pico)'
++ You might get prompted to install the firmware.
+
+## Add picozero
+
++ Go to 'Tools > Manage packages'
++ Type 'picozero' into the search bar
++ Click 'Search on PyPI'
+
+![Thonny install packages window with search box.](images/search-picozero.png)
+
+ + Click on 'picozero' in the search results
+ + Click on 'install'
+
+![picozero in search results.](images/tools-manage-packages.png)
+
+See the [Introduction to the Raspberry Pi Pico Guide](https://projects.raspberrypi.org/en/pathways/pico-intro){:target="_blank"} for more information. 
diff --git a/ja-JP/images/pico-top-plug.png b/ja-JP/images/pico-top-plug.png
diff --git a/ja-JP/images/plug-in-pico.png b/ja-JP/images/plug-in-pico.png
diff --git a/ja-JP/images/search-picozero.png b/ja-JP/images/search-picozero.png
diff --git a/ja-JP/images/tools-manage-packages.png b/ja-JP/images/tools-manage-packages.png
diff --git a/ja-JP/meta.yml b/ja-JP/meta.yml
@@ -0,0 +1,10 @@
+title: Set up picozero
+hero_image: images/banner.png
+description: Install the picozero package on your Raspberry Pi Pico with Thonny.
+version: 4
+listed: false
+copyedit: false
+last_tested: "2022-05-19"
+steps:
+  - 
+    title: Set up picozero