RadioBerry V2.0 - Ham radio cape for Raspberry PI

Main purpose of the project:

• Building a HAM Radio
• Learning (from noob to guru)

WIKI FOR MORE DETAILS: https://github.com/pa3gsb/Radioberry-2.x/wiki

Radioberry:

• Raspberry PI

• Radio extension board (cape)

  • using AD9866 (12 bit) for RX and TX modes.

  

Powered by Raspberry Pi

Radioberry is designed to run on Raspberry Pi hardware and is licensed to use the official “Powered by Raspberry Pi” logo.

Raspberry Pi is a trademark of Raspberry Pi Ltd.

Building

Install dependencies

sudo apt-get update
sudo apt-get install git libpulse-dev libgtk-3-dev libasound2-dev libcurl4-openssl-dev \
	libi2c-dev libgpiod-dev libusb-1.0-0-dev device-tree-compiler libfftw3-dev

Obtain the source codes

cd /tmp
git clone --depth=1 https://github.com/pa3gsb/Radioberry-2.x.git
cd Radioberry-2.x
git submodule update --init --recursive --depth=1

Build the software

sudo cp /tmp/Radioberry-2.x/wdsp/libwdsp.so /usr/local/lib/
sudo ldconfig
make CFLAGS="-g -Wno-deprecated-declarations -I../wdsp" LDFLAGS="-L../wdsp" -j$(nproc)

Installation

sudo make install FPGATYPE=CL016