Added image with SERIAL interface

kodarn · Mar 28, 2018 · 21b806d · 21b806d
1 parent 6dd590f
commit 21b806d
Show file tree

Hide file tree

Showing 4 changed files with 10 additions and 0 deletions.
diff --git a/LogicAnalyzer/ReceivingDisplay-SERIALPORT/HookUp.png b/LogicAnalyzer/ReceivingDisplay-SERIALPORT/HookUp.png
diff --git a/LogicAnalyzer/ReceivingDisplay-SERIALPORT/StartupMessage1.png b/LogicAnalyzer/ReceivingDisplay-SERIALPORT/StartupMessage1.png
diff --git a/LogicAnalyzer/ReceivingDisplay-SERIALPORT/StartupMessage2.png b/LogicAnalyzer/ReceivingDisplay-SERIALPORT/StartupMessage2.png
diff --git a/README.md b/README.md
@@ -1141,6 +1141,16 @@ Using the multimeter in beep-mode, we come up with the following result:
 
 ![Debug interfaces on the receiving display](Docs/HardwareBoard_Receiver_Outline3.png?raw=true "Debug interfaces on the receiving display")
 
+When hooking up the logic analyser to TX on UART0, we see the following bits. 
+![Serial Port Hook Up](LogicAnalyzer/ReceivingDisplay-SERIALPORT/HookUp.png?raw=true "Serial Port Hook Up")
+![Serial Port](LogicAnalyzer/ReceivingDisplay-SERIALPORT/StartupMessage1.png?raw=true "Serial Port")
+We measure the bit width, and calculate the baudrate based upon that. BaudRate = 1 / PulseWidth =  1 / 0.00002608 = 38343.56, which rounded off to nearest commonly known baudrate is 38400 bps.
+
+Then we can configure the UART-decoder in the logic analyser, which decodes the bits into the text string "Starting up ELIS".
+![Serial Port](LogicAnalyzer/ReceivingDisplay-SERIALPORT/StartupMessage2.png?raw=true "Serial Port")
+
+
+
 
 To be continued...