rpi23-gen-image.sh is an advanced Debian Linux bootstrapping shell script for generating Debian OS images for all Raspberry Pi computers. The script at this time supports the bootstrapping of the Debian (armhf/armel) releases stretch and buster. Raspberry Pi 0/1/2/3/4 images are generated for 32-bit mode only. Raspberry Pi 3 supports 64-bit images that can be generated using custom configuration parameters (templates/rpi3-stretch-arm64-4.14.y).
The following list of Debian packages must be installed on the build system because they are essentially required for the bootstrapping process. The script will check if all required packages are installed and missing packages will be installed automatically if confirmed by the user.
debootstrap debian-archive-keyring qemu-user-static binfmt-support dosfstools rsync bmap-tools whois git bc psmisc dbus sudo
It is recommended to configure the rpi23-gen-image.sh script to build and install the latest Raspberry Pi Linux kernel. For the Raspberry 3 this is mandatory. Kernel compilation and linking will be performed on the build system using an ARM (armhf/armel/aarch64) cross-compiler toolchain.
The script has been tested using the default crossbuild-essential-armhf and crossbuild-essential-armel toolchain meta packages on Debian Linux stretch build systems. Please check the Debian CrossToolchains Wiki for further information.
The script accepts certain command-line parameters to enable or disable specific OS features, services and configuration settings. These parameters are passed to the rpi23-gen-image.sh script via (simple) shell-variables. Unlike environment shell-variables (simple) shell-variables are defined at the beginning of the command-line call of the rpi23-gen-image.sh script.
ENABLE_UBOOT=true ./rpi23-gen-image.sh
ENABLE_CONSOLE=false ENABLE_IPV6=false ./rpi23-gen-image.sh
ENABLE_WM=xfce4 ENABLE_FBTURBO=true ENABLE_MINBASE=true ./rpi23-gen-image.sh
ENABLE_HARDNET=true ENABLE_IPTABLES=true /rpi23-gen-image.sh
APT_SERVER=ftp.de.debian.org APT_PROXY="http://127.0.0.1:3142/" ./rpi23-gen-image.sh
ENABLE_MINBASE=true ./rpi23-gen-image.sh
BUILD_KERNEL=true ENABLE_MINBASE=true ENABLE_IPV6=false ./rpi23-gen-image.sh
BUILD_KERNEL=true KERNELSRC_DIR=/tmp/linux ./rpi23-gen-image.sh
ENABLE_MINBASE=true ENABLE_REDUCE=true ENABLE_MINGPU=true BUILD_KERNEL=true ./rpi23-gen-image.sh
ENABLE_CRYPTFS=true CRYPTFS_PASSWORD=changeme EXPANDROOT=false ENABLE_MINBASE=true ENABLE_REDUCE=true ENABLE_MINGPU=true BUILD_KERNEL=true ./rpi23-gen-image.sh
RELEASE=buster BUILD_KERNEL=true ./rpi23-gen-image.sh
RPI_MODEL=3 ENABLE_WIRELESS=true ENABLE_MINBASE=true BUILD_KERNEL=true ./rpi23-gen-image.sh
RELEASE=buster RPI_MODEL=3 ENABLE_WIRELESS=true ENABLE_MINBASE=true BUILD_KERNEL=true ./rpi23-gen-image.shTo avoid long lists of command-line parameters and to help to store the favourite parameter configurations the rpi23-gen-image.sh script supports so called configuration template files (CONFIG_TEMPLATE=template). These are simple text files located in the ./templates directory that contain the list of configuration parameters that will be used. New configuration template files can be added to the ./templates directory.
CONFIG_TEMPLATE=rpi3stretch ./rpi23-gen-image.sh
CONFIG_TEMPLATE=rpi2stretch ./rpi23-gen-image.sh- A Pipe ("|") represents a logical OR
- A valuetype of boolean represents the options true or false
- Values without a default are required if you want do use that feature. It is possible that not every feature has a (working) sanity check.
- If it's not working as expected, search your option in all the files in this repository (With e.g.grep or notepad++).
- Check if your missing a required option while looking at the code
| Option | Value | default value | value format | desciption |
|---|---|---|---|---|
| APT_SERVER | string | ftp.debian.org | URL |
Set Debian packages server address. Choose a server from the list of Debian worldwide mirror sites. Using a nearby server will probably speed-up all required downloads within the bootstrapping process. |
| APT_PROXY | string | URL |
Set Proxy server address. Using a local Proxy-Cache like apt-cacher-ng will speed-up the bootstrapping process because all required Debian packages will only be downloaded from the Debian mirror site once. If apt-cacher-ng is running on default http://127.0.0.1:3142 it is autodetected and you don't need to set this. |
|
| KEEP_APT_PROXY | boolean | false | true|false |
true=Keep the APT_PROXY settings used in the bootsrapping process in the generated image |
| APT_INCLUDES | string list | packageA,packageB,... |
A comma-separated list of additional packages to be installed by debootstrap during bootstrapping. | |
| APT_INCLUDES_LATE | string list | packageA,packageB,... |
A comma-separated list of additional packages to be installed by apt after bootstrapping and after APT sources are set up. This is useful for packages with pre-depends, which debootstrap do not handle well. | |
| APT_EXCLUDES | string list | packageA,packageB,... |
A comma-separated list of packages to exclude. Use carefully |
| Option | Value | default value | value format | desciption |
|---|---|---|---|---|
| SET_ARCH | integer | 32 | 32|64 |
Set Architecture to default 32bit. If you want to compile 64-bit (RPI3/RPI3+/RPI4) set it to 64. This option will set every needed cross-compiler or board specific option for a successful build. |
| RPI_MODEL | string | 3P | 0|1|1P|2|3|3P|4 |
Set Architecture. This option will set most build options accordingly. Specify the target Raspberry Pi hardware model. |
| RELEASE | string | buster | jessie|buster|stretch| bullseye|testing|stable| oldstable |
Set the desired Debian release name. The script at this time supports the bootstrapping of the Debian releases stretch and buster. |
| HOSTNAME | string | RPI_MODEL-RELEASE(e.g. RPI3-buster) | SomeImageName.img |
Set system hostname. It's recommended that the hostname is unique in the corresponding subnet. |
| DEFLOCAL | string | en_US.UTF-8 | Locale.Charset |
Set default system locale. This setting can also be changed inside the running OS using the dpkg-reconfigure locales command. Please note that on using this parameter the script will automatically install the required packages locales, keyboard-configuration and console-setup. |
| TIMEZONE | string | Europe/Berlin | Timezone |
Set default system timezone. All available timezones can be found in the /usr/share/zoneinfo/ directory. This setting can also be changed inside the running OS using the dpkg-reconfigure tzdata command. |
| EXPANDROOT | boolean | true | true|false |
true=Expand the root partition and filesystem automatically on first boot |
| Option | Value | default value | desciption |
|---|---|---|---|
| ENABLE_ROOT | boolean | false | true=root login if ROOT_PASSWORD is set |
| ROOT_PASSWORD | string | raspberry | Set password for root user. It's STRONGLY recommended that you choose a custom password. |
| ENABLE_USER | boolean | true | true=Create non-root user with password USER_PASSWORD and username USER_NAME |
| USER_NAME | string | pi | Set username for non-root user, if ENABLE_USER is true |
| USER_PASSWORD | string | raspberry | Set password for non-root user, if ENABLE_USER is true. It's STRONGLY recommended that you choose a custom password. |
These options are used to configure keyboard layout in /etc/default/keyboard for console and Xorg. These settings can also be changed inside the running OS using the dpkg-reconfigure keyboard-configuration command.
| Option | Value | default value | value format | desciption |
|---|---|---|---|---|
| XKB_MODEL | string | pc104 |
Set the name of the model of your keyboard type | |
| XKB_LAYOUT | string | us |
Set the supported keyboard layout(s) | |
| XKB_VARIANT | string | basic |
Set the supported variant(s) of the keyboard layout(s) | |
| XKB_OPTIONS | string | grp:alt_shift_toggle |
Set extra xkb configuration options |
ethernet setting go to /etc/systemd/network/eth0.network.
wifi settings go to /etc/systemd/network/wlan0.network.
The default location of network configuration files in the Debian stretch release was changed to /lib/systemd/network.`
| Option | Value | default value | desciption |
|---|---|---|---|
| ENABLE_IPV6 | boolean | true | true=Enable IPv6 support via systemd-networkd |
| ENABLE_WIRELESS | boolean | false | true=Download and install the closed-source firmware binary blob that is required to run the internal wireless interface of the Raspberry Pi model 3. This parameter is ignored if the specified RPI_MODEL is not 0,3,3P,4 |
| ENABLE_IPTABLES | boolean | false | true=Enable iptables IPv4/IPv6 firewall. Simplified ruleset: Allow all outgoing connections. Block all incoming connections except to OpenSSH service. |
| ENABLE_HARDNET | boolean | false | true=Enable IPv4/IPv6 network stack hardening settings |
| ENABLE_IFNAMES | boolean | true | true=creates complex and long interface names like e.g. encx8945924. Enable automatic assignment of predictable, stable network interface names for all NICs |
| Option | Value | default value | desciption |
|---|---|---|---|
| ENABLE_ETH_DHCP | boolean | true | Set the system to use DHCP on wired interface. This requires an DHCP server |
| ENABLE_WIFI_DHCP | boolean | true | Set the system to use DHCP on wifi interface. This requires an DHCP server. Requires ENABLE_WIRELESS |
The following static networking parameters are only supported if ENABLE_ETH_DHCP was set to false.
| Option | Value | value format | desciption |
|---|---|---|---|
| NET_ETH_ADDRESS | string | CIDR |
static IPv4 or IPv6 address and its prefix, separated by "/", eg. "192.169.0.3/24" |
| NET_ETH_GATEWAY | string | IP |
default gateway |
| NET_ETH_DNS_1 | string | IP |
first DNS server |
| NET_ETH_DNS_2 | string | IP |
second DNS server |
| NET_ETH_DNS_DOMAINS | string | example.local |
default DNS search domains to use for non fully qualified hostnames |
| NET_ETH_NTP_1 | string | IP |
first NTP server |
| NET_ETH_NTP_2 | string | IP |
second NTP server |
| Option | Value | value format | desciption |
|---|---|---|---|
| NET_WIFI_SSID | string | yourwifiname |
WIFI SSID |
| NET_WIFI_PSK | string | yourwifikeytojoinnetwork |
WPA/WPA2 PSK |
The following static networking parameters are only supported if ENABLE_WIFI_DHCP was set to false.
| Option | Value | value format | desciption |
|---|---|---|---|
| NET_WIFI_ADDRESS | string | CIDR |
static IPv4 or IPv6 address and its prefix, separated by "/", eg. "192.169.0.3/24" |
| NET_WIFI_GATEWAY | string | IP |
default gateway |
| NET_WIFI_DNS_1 | string | IP |
first DNS server |
| NET_WIFI_DNS_2 | string | IP |
second DNS server |
| NET_WIFI_DNS_DOMAINS | string | example.local |
default DNS search domains to use for non fully qualified hostnames |
| NET_WIFI_NTP_1 | string | IP |
first NTP server |
| NET_WIFI_NTP_2 | string | IP |
second NTP server |
| Option | Value | default value | value format | desciption |
|---|---|---|---|---|
| ENABLE_CONSOLE | boolean | false | true|false |
true=Enable serial console interface.Recommended if no monitor or keyboard is connected to the RPi2/3. In case of problems fe. if the network (auto) configuration failed - the serial console can be used to access the system. On RPI 0 3 3P the CPU speed is locked at lowest speed. |
| ENABLE_PRINTK | boolean | false | true|false |
true=Enables printing kernel messages to konsole. printk is 3 4 1 3 as in raspbian |
| ENABLE_BLUETOOTH | boolean | false | true|false |
true=Enable onboard Bluetooth interface on the RPi0/3/3P. See: Configuring the GPIO serial port on Raspbian jessie and stretch |
| ENABLE_MINIUART_OVERLAY | boolean | false | true|false |
true=Enable Bluetooth to use this. Adds overlay to swap UART0 with UART1. Enabling (slower) Bluetooth and full speed serial console. - RPI 0 3 3P have a fast hardware UART0 (ttyAMA0) and a mini UART1 (ttyS0)! RPI 1 1P 2 only have a hardware UART0. UART0 is considered better, because is faster and more stable than mini UART1. By default the Bluetooth modem is mapped to the hardware UART0 and mini UART is used for console. The mini UART is a problem for the serial console, because its baudrate depends on the CPU frequency, which is changing on runtime. Resulting in a volatile baudrate and thus in an unusable serial console. |
| ENABLE_TURBO | boolean | false | true|false |
true=Enable Turbo mode. This setting locks cpu at the highest frequency. As setting ENABLE_CONSOLE=true locks RPI to lowest CPU speed, this is can be used additionally to lock cpu hat max speed. Need a good power supply and probably cooling for the Raspberry PI |
| ENABLE_I2C | boolean | true | true|false |
true=Enable I2C interface on the RPi 0/1/2/3. Please check the RPi 0/1/2/3 pinout diagrams to connect the right GPIO pins |
| ENABLE_SPI | boolean | true | true|false |
true=Enable SPI interface on the RPi 0/1/2/3. Please check the RPi 0/1/2/3 pinout diagrams to connect the right GPIO pins |
| SSH_ENABLE | boolean | true | true|false |
Install and enable OpenSSH service. The default configuration of the service doesn't allow root to login. Please use the user pi instead and su - or sudo to execute commands as root |
| ENABLE_NONFREE | boolean | false | true|false |
true=enable non-free|false=disable non free. Edits /etc/apt/sources.list in your resulting image |
| ENABLE_RSYSLOG | boolean | false | true|false |
true=keep rsyslog|false=remove rsyslog. If rsyslog is removed (false), logs will be available only in journal files) |
| ENABLE_SOUND | boolean | false | true|false |
true=Enable sound|false=Disable sound |
| ENABLE_HWRANDOM | boolean | true | true|false |
true=Enable Hardware Random Number Generator(RNG)|false=Disable Hardware RNG|Strong random numbers are important for most network-based communications that use encryption. It's recommended to be enabled |
| ENABLE_MINGPU | boolean | false | true|false |
true=GPU 16MB RAM|false=64MB RAM|Minimize the amount of shared memory reserved for the GPU. It doesn't seem to be possible to fully disable the GPU. Also removes start.elf,fixup.dat,start_x.elf,fixup_x.dat form /boot |
| ENABLE_XORG | boolean | false | true|false |
true=Install Xorg X Window System |
| ENABLE_WM | string | blackbox, openbox, fluxbox,jwm, dwm, xfce4, awesome |
Install a user-defined window manager for the X Window System. To make sure all X related package dependencies are getting installed ENABLE_XORG will automatically set true if ENABLE_WM is used |
|
| ENABLE_SYSVINIT | boolean | false | true|false |
true=Support for halt,init,poweroff,reboot,runlevel,shutdown,init commands|false=use systemd commands |
| ENABLE_SPLASH | boolean | true | true|false |
true=Enable default Raspberry Pi boot up rainbow splash screen |
| ENABLE_LOGO | boolean | true | true|false |
true=Enable default Raspberry Pi console logo (image of four raspberries in the top left corner) |
| ENABLE_SILENT_BOOT | boolean | false | true|false |
true=Set the verbosity of console messages shown during boot up to a strict minimum |
| DISABLE_UNDERVOLT_WARNINGS | integer | 1|2 |
Unset to keep default behaviour. Setting the parameter to 1 will disable the warning overlay. Setting it to 2 will additionally allow RPi2/3 turbo mode when low-voltage is present |
| Option | Value | default value | value format | desciption |
|---|---|---|---|---|
| ENABLE_DPHYSSWAP | boolean | true | true|false |
Enable swap. The size of the swapfile is chosen relative to the size of the root partition. It'll use the dphys-swapfile package for that |
| ENABLE_SYSTEMDSWAP | boolean | false | true|false |
Enables Systemd-swap service. Usefull if KERNEL_ZSWAP is enabled |
| ENABLE_QEMU | boolean | false | true|false |
Generate kernel (vexpress_defconfig), file system image (qcow2) and DTB files that can be used for QEMU full system emulation (vexpress-A15). The output files are stored in the $(pwd)/images/qemu directory. You can find more information about running the generated image in the QEMU section of this readme file |
| QEMU_BINARY | string | FullPathToQemuBinaryFile |
Sets the QEMU enviornment for the Debian archive. Set by RPI_MODEL | |
| ENABLE_KEYGEN | boolean | false | true|false |
Recover your lost codec license |
| ENABLE_MINBASE | boolean | false | true|false |
Use debootstrap script variant minbase which only includes essential packages and apt. This will reduce the disk usage by about 65 MB |
| ENABLE_SPLITFS | boolean | false | true|false |
Enable having root partition on an USB drive by creating two image files: one for the /boot/firmware mount point, and another for / |
| ENABLE_INITRAMFS | boolean | false | true|false |
Create an initramfs that that will be loaded during the Linux startup process. ENABLE_INITRAMFS will automatically get enabled if ENABLE_CRYPTFS=true. This parameter will be ignored if BUILD_KERNEL=false |
| ENABLE_DBUS | boolean | true | true|false |
Install and enable D-Bus message bus. Please note that systemd should work without D-bus but it's recommended to be enabled |
| ENABLE_USBBOOT | boolean | false | true|false |
true=prepare image for usbboot. use with ENABLE_SPLTFS=true |
| CHROOT_SCRIPTS | string | FullPathToScriptFolder |
Full path to a directory with scripts that should be run in the chroot before the image is finally built. Every executable file in this directory is run in lexicographical order | |
| ENABLE_UBOOT | boolean | false | true|false |
Replace the default RPi 0/1/2/3 second stage bootloader (bootcode.bin) with U-Boot bootloader. U-Boot can boot images via the network using the BOOTP/TFTP protocol. RPI4 needs tbd |
| UBOOTSRC_DIR | string | FullPathToUBootFolder |
Full path to a directory named u-boot of U-Boot bootloader sources that will be copied, configured, build and installed inside the chroot |
|
| ENABLE_FBTURBO | boolean | false | true|false |
Install and enable the hardware accelerated Xorg video driver fbturbo. Please note that this driver is currently limited to hardware accelerated window moving and scrolling |
| FBTURBOSRC_DIR | string | FullPathToFbTurboFolder |
Full path to a directory named xf86-video-fbturbo of hardware accelerated Xorg video driver sources that will be copied, configured, build and installed inside the chroot |
|
| ENABLE_VIDEOCORE | boolean | false | true|false |
Install and enable the ARM side libraries for interfacing to Raspberry Pi GPU vcgencmd. Please note that this driver is currently limited to hardware accelerated window moving and scrolling |
| VIDEOCORESRC_DIR | string | FullPathToVideoSrcFolder |
Full path to a directory named userland of ARM side libraries for interfacing to Raspberry Pi GPU that will be copied, configured, build and installed inside the chroot |
|
| ENABLE_NEXMON | boolean | false | true|false |
Install and enable the source code for a C-based firmware patching framework for Broadcom/Cypress WiFi chips that enables you to write your own firmware patches, for example, to enable monitor mode with radiotap headers and frame injection](https://github.com/seemoo-lab/nexmon.git) |
| NEXMONSRC_DIR | string | FullPathToNexmonFolder |
Full path to a directory named nexmon of Source code for ARM side libraries for interfacing to Raspberry Pi GPU that will be copied, configured, build and installed inside the chroot |
| Option | Value | default value | value format | desciption |
|---|---|---|---|---|
| SSH_ENABLE_ROOT | boolean | false | true|false |
Enable password-based root login via SSH. This may be a security risk with the default password set, use only in trusted environments. ENABLE_ROOT must be set to true |
| SSH_DISABLE_PASSWORD_AUTH | boolean | false | true|false |
Disable password-based SSH authentication. Only public key based SSH (v2) authentication will be supported |
| SSH_LIMIT_USERS | boolean | false | true|false |
Limit the users that are allowed to login via SSH. Only allow user USER_NAME=pi and root if SSH_ENABLE_ROOT=true to login. This parameter will be ignored if dropbear SSH is used (REDUCE_SSHD=true) |
| SSH_ROOT_PUB_KEY | string | PathToYourROOTRSAPublicKeyFile |
Full path to file. Add SSH (v2) public key(s) from specified file to authorized_keys file to enable public key based SSH (v2) authentication of user root. The specified file can also contain multiple SSH (v2) public keys. SSH protocol version 1 is not supported. ENABLE_ROOT and SSH_ENABLE_ROOT must be set to true |
|
| SSH_USER_PUB_KEY | string | PathToYourUSERRSAPublicKeyFile |
Full path to file. Add SSH (v2) public key(s) from specified file to authorized_keys file to enable public key based SSH (v2) authentication of user USER_NAME=pi. The specified file can also contain multiple SSH (v2) public keys. SSH protocol version 1 is not supported |
| Option | Value | default value | value format | desciption |
|---|---|---|---|---|
| BUILD_KERNEL | true | true|false |
Build and install the latest RPi 0/1/2/3/4 Linux kernel. The default RPi 0/1/2/3/ kernel configuration is used most of the time. ENABLE_NEXMON - Changes Kernel Source to [https://github.com/Re4son/](Kali Linux Kernel) Precompiled 32bit kernel for RPI0/1/2/3 by https://github.com/hypriot/ Precompiled 64bit kernel for RPI3/4 by https://github.com/sakaki-/ | |
| CROSS_COMPILE | string | This sets the cross-compile environment for the compiler. Set by RPI_MODEL | ||
| KERNEL_ARCH | string | This sets the kernel architecture for the compiler. Set by RPI_MODEL | ||
| KERNEL_IMAGE | string | Name of the image file in the boot partition. Set by RPI_MODEL | ||
| KERNEL_BRANCH | string | Name of the requested branch from the GIT location for the RPi Kernel. Default is using the current default branch from the GIT site | ||
| KERNEL_DEFCONFIG | string | Sets the default config for kernel compiling. Set by RPI_MODEL | ||
| KERNEL_THREADS | integer | 1 | 1|2|3|... |
Number of threads to build the kernel. If not set, the script will automatically determine the maximum number of CPU cores to speed up kernel compilation |
| KERNEL_HEADERS | boolean | true | true|false |
Install kernel headers with the built kernel |
| KERNEL_MENUCONFIG | boolean | false | true|false |
Start make menuconfig interactive menu-driven kernel configuration. The script will continue after make menuconfig was terminated |
| KERNEL_OLDDEFCONFIG | boolean | false | true|false |
Run make olddefconfig to automatically set all new kernel configuration options to their recommended default values |
| KERNEL_CCACHE | boolean | false | true|false |
Compile the kernel using ccache. This speeds up kernel recompilation by caching previous compilations and detecting when the same compilation is being done again |
| KERNEL_REMOVESRC | boolean | true | true|false |
Remove all kernel sources from the generated OS image after it was built and installed |
| KERNELSRC_DIR | string | FullPathToKernelSrcDir |
Full path to a directory named linux of RaspberryPi Linux kernel sources that will be copied, configured, build and installed inside the chroot |
|
| KERNELSRC_CLEAN | boolean | false | true|false |
Clean the existing kernel sources directory KERNELSRC_DIR (using make mrproper) after it was copied to the chroot and before the compilation of the kernel has started. This parameter will be ignored if no KERNELSRC_DIR was specified or if KERNELSRC_PREBUILT=true |
| KERNELSRC_CONFIG | boolean | true | true|false |
true=enable custom kernel options. This parameter is automatically set to true if no existing kernel sources directory was specified using KERNELSRC_DIR. This parameter is ignored if KERNELSRC_PREBUILT=true |
| KERNELSRC_USRCONFIG | string | FullPathToUserKernel.config |
Copy own config file to kernel .config. If KERNEL_MENUCONFIG=true then running after copy |
|
| KERNELSRC_PREBUILT | boolean | false | true|false |
With this parameter set to true the script expects the existing kernel sources directory to be already successfully cross-compiled. The parameters KERNELSRC_CLEAN, KERNELSRC_CONFIG, KERNELSRC_USRCONFIG and KERNEL_MENUCONFIG are ignored and no kernel compilation tasks are performed |
| RPI_FIRMWARE_DIR | string | FullPathToFolder |
Full path to a directory named firmware, containing a local copy of the firmware from the RaspberryPi firmware project. Default is to download the latest firmware directly from the project |
|
| KERNEL_DEFAULT_GOV | string | ondemand | performance|powersave| userspace|ondemand| conservative|schedutil |
Set the default cpu governor at kernel compilation |
| KERNEL_NF | boolean | false | true|false |
Enable Netfilter modules as kernel modules. You want that for iptables |
| KERNEL_VIRT | boolean | false | true|false |
Enable Kernel KVM support (/dev/kvm) |
| KERNEL_ZSWAP | boolean | false | true|false |
Enable Kernel Zswap support. Best use on high RAM load and mediocre CPU load usecases |
| KERNEL_BPF | boolean | true | true|false |
Allow attaching eBPF programs to a cgroup using the bpf syscall (CONFIG_BPF_SYSCALL CONFIG_CGROUP_BPF) [systemd wants it - File /lib/systemd/system/systemd-journald.server:36 configures an IP firewall (IPAddressDeny=all), but the local system does not support BPF/cgroup based firewalls] |
| KERNEL_SECURITY | boolean | false | true|false |
Enables Apparmor, integrity subsystem, auditing |
| KERNEL_BTRFS | boolean | false | true|false |
enable btrfs kernel support |
| KERNEL_POEHAT | boolean | false | true|false |
enable Enable RPI POE HAT fan kernel support |
| KERNEL_NSPAWN | boolean | false | true|false |
Enable per-interface network priority control - for systemd-nspawn |
| KERNEL_DHKEY | boolean | true | true|false |
Diffie-Hellman operations on retained keys - required for >keyutils-1.6 |
The following list of parameters is ignored if ENABLE_REDUCE=false.
| Option | Value | default value | value format | desciption |
|---|---|---|---|---|
| ENABLE_REDUCE | boolean | false | true|false |
Reduce the disk space usage by deleting packages and files. See REDUCE_* parameters for detailed information |
| REDUCE_APT | boolean | true | true|false |
Configure APT to use compressed package repository lists and no package caching files |
| REDUCE_DOC | boolean | false | true|false |
Remove all doc files (harsh). Configure APT to not include doc files on future apt-get package installations |
| REDUCE_MAN | boolean | false | true|false |
Remove all man pages and info files (harsh). Configure APT to not include man pages on future apt-get package installations |
| REDUCE_VIM | boolean | false | true|false |
Replace vim-tiny package by levee a tiny vim clone |
| REDUCE_BASH | boolean | false | true|false |
Remove bash package and switch to dash shell (experimental) |
| REDUCE_HWDB | boolean | false | true|false |
Remove PCI related hwdb files (experimental) |
| REDUCE_SSHD | boolean | false | true|false |
Replace openssh-server with dropbear |
| REDUCE_LOCALE | boolean | false | true|false |
Remove all locale translation files |
| REDUCE_KERNEL | boolean | false | true|false |
Reduce the size of the generated kernel by removing unwanted devices, network and filesystem drivers (experimental) |
See cryptsetup options for a more information about opttion values(https://wiki.archlinux.org/index.php/Dm-crypt/Device_encryption)
| Option | Value | default value | value format | desciption |
|---|---|---|---|---|
| ENABLE_CRYPTFS | boolean | false | true|false |
Enable full system encryption with dm-crypt. Setup a fully LUKS encrypted root partition (aes-xts-plain64:sha512) and generate required initramfs. The /boot directory will not be encrypted. This parameter will be ignored if BUILD_KERNEL=false. ENABLE_CRYPTFS is experimental |
| CRYPTFS_PASSWORD | string | YourPasswordToUnlockCrypto |
Set password of the encrypted root partition. This parameter is mandatory if ENABLE_CRYPTFS=true |
|
| CRYPTFS_MAPPING | string | secure | YourDevMNapperName |
crypsetup device-mapper name |
| CRYPTFS_CIPHER | string | aes-xts-plain64 | aes-cbc-essiv:sha256 |
cryptsetup cipher aes-xts* ciphers are strongly recommended |
| CRYPTFS_HASH | string | sha256 | sha256|sha512 |
cryptsetup hash algorithm |
| CRYPTFS_XTSKEYSIZE | integer | 256 | 256|512 |
|
| CRYPTFS_DROPBEAR | boolean | false | true|false |
true=Enable Dropbear Initramfs support|false=disable dropbear |
| CRYPTFS_DROPBEAR_PUBKEY | string | PathToYourPublicDropbearKeyFile |
Full path to dropbear Public RSA-OpenSSH Key |
| Option | Value | default value | value format | desciption |
|---|---|---|---|---|
| BASEDIR | string | FullPathToScriptRootDir |
If unset start from scriptroot or set to Full path to rpi123-gen-image directory | |
| IMAGE_NAME | string | YourImageName |
if unset creates a name after this template: rpiRPI_MODEL-RELEASE-RELEASE_ARCH |
The functions of this script that are required for the different stages of the bootstrapping are split up into single files located inside the bootstrap.d directory. During the bootstrapping every script in this directory gets executed in lexicographical order:
| Script | Description |
|---|---|
10-bootstrap.sh |
Debootstrap basic system |
11-apt.sh |
Setup APT repositories |
12-locale.sh |
Setup Locales and keyboard settings |
13-kernel.sh |
Build and install RPi 0/1/2/3 Kernel |
14-fstab.sh |
Setup fstab and initramfs |
15-rpi-config.sh |
Setup RPi 0/1/2/3 config and cmdline |
20-networking.sh |
Setup Networking |
21-firewall.sh |
Setup Firewall |
30-security.sh |
Setup Users and Security settings |
31-logging.sh |
Setup Logging |
32-sshd.sh |
Setup SSH and public keys |
41-uboot.sh |
Build and Setup U-Boot |
42-fbturbo.sh |
Build and Setup fbturbo Xorg driver |
43-videocore.sh |
Build and Setup videocore libraries |
50-firstboot.sh |
First boot actions |
99-reduce.sh |
Reduce the disk space usage |
All the required configuration files that will be copied to the generated OS image are located inside the files directory. It is not recommended to modify these configuration files manually.
| Directory | Description |
|---|---|
apt |
APT management configuration files |
boot |
Boot and RPi 0/1/2/3 configuration files |
dpkg |
Package Manager configuration |
etc |
Configuration files and rc scripts |
firstboot |
Scripts that get executed on first boot |
initramfs |
Initramfs scripts |
iptables |
Firewall configuration files |
locales |
Locales configuration |
modules |
Kernel Modules configuration |
mount |
Fstab configuration |
network |
Networking configuration files |
sysctl.d |
Swapping and Network Hardening configuration |
xorg |
fbturbo Xorg driver configuration |
Debian custom packages, i.e. those not in the debian repositories, can be installed by placing them in the packages directory. They are installed immediately after packages from the repositories are installed. Any dependencies listed in the custom packages will be downloaded automatically from the repositories. Do not list these custom packages in APT_INCLUDES.
Scripts in the custom.d directory will be executed after all other installation is complete but before the image is created.
All information related to the bootstrapping process and the commands executed by the rpi23-gen-image.sh script can easily be saved into a logfile. The common shell command script can be used for this purpose:
script -c 'APT_SERVER=ftp.de.debian.org ./rpi23-gen-image.sh' ./build.logAfter the image file was successfully created by the rpi23-gen-image.sh script it can be copied to the microSD card that will be used by the RPi 0/1/2/3 computer. This can be performed by using the tools bmaptool or dd. Using bmaptool will probably speed-up the copy process because bmaptool copies more wisely than dd.
bmaptool copy ./images/buster/2017-01-23-rpi3-buster.img /dev/mmcblk0
dd bs=4M if=./images/buster/2017-01-23-rpi3-buster.img of=/dev/mmcblk0If you have set ENABLE_SPLITFS, copy the -frmw image on the microSD card, then the -root one on the USB drive:
bmaptool copy ./images/buster/2017-01-23-rpi3-buster-frmw.img /dev/mmcblk0
bmaptool copy ./images/buster/2017-01-23-rpi3-buster-root.img /dev/sdcStart QEMU full system emulation:
qemu-system-arm -m 2048M -M vexpress-a15 -cpu cortex-a15 -kernel kernel7.img -no-reboot -dtb vexpress-v2p-ca15_a7.dtb -sd ${IMAGE_NAME}.qcow2 -append "root=/dev/mmcblk0p2 rw rootfstype=ext4 console=tty1"Start QEMU full system emulation and output to console:
qemu-system-arm -m 2048M -M vexpress-a15 -cpu cortex-a15 -kernel kernel7.img -no-reboot -dtb vexpress-v2p-ca15_a7.dtb -sd ${IMAGE_NAME}.qcow2 -append "root=/dev/mmcblk0p2 rw rootfstype=ext4 console=ttyAMA0,115200 init=/bin/systemd" -serial stdioStart QEMU full system emulation with SMP and output to console:
qemu-system-arm -m 2048M -M vexpress-a15 -cpu cortex-a15 -smp cpus=2,maxcpus=2 -kernel kernel7.img -no-reboot -dtb vexpress-v2p-ca15_a7.dtb -sd ${IMAGE_NAME}.qcow2 -append "root=/dev/mmcblk0p2 rw rootfstype=ext4 console=ttyAMA0,115200 init=/bin/systemd" -serial stdioStart QEMU full system emulation with cryptfs, initramfs and output to console:
qemu-system-arm -m 2048M -M vexpress-a15 -cpu cortex-a15 -kernel kernel7.img -no-reboot -dtb vexpress-v2p-ca15_a7.dtb -sd ${IMAGE_NAME}.qcow2 -initrd "initramfs-${KERNEL_VERSION}" -append "root=/dev/mapper/secure cryptdevice=/dev/mmcblk0p2:secure rw rootfstype=ext4 console=ttyAMA0,115200 init=/bin/systemd" -serial stdio