Skip to content

ThibautBorn/plone.app.contenttypes

BranchesTags
 
 

Repository files navigation

Contents

https://api.travis-ci.org/plone/plone.app.contenttypes.png?branch=master

plone.app.contenttypes documentation

Introduction

plone.app.contenttypes provides default content types for Plone based on Dexterity. It replaces Products.ATContentTypes and provides the default-types in Plone 5. It can be used as an add-on in Plone 4.x.

It contains the following types:

  • Collection
  • Document
  • Event
  • File
  • Folder
  • Image
  • Link
  • News Item

The main difference from a users perspective is that these types are editable and extendable through-the-web. This means you can add or remove fields and behaviors using the control-panel "Dexterity Content Types" (/@@dexterity-types).

Warning: Using plone.app.contenttypes on a site with existing Archetypes-based content requires migrating the sites content. Please see the chapter "Migration".

Compatibility

The versions 1.2.x (build from the master-branch) are used in Plone 5.

Version 1.1b5 and later are tested with Plone 4.3.x. The versions build from the branch 1.1.x will stay compatible with Plone 4.3.x.

For support of Plone 4.1 and 4.2 please use versions 1.0.x. Please note that they do not provide the full functionality.

Installation

This package is included in Plone 5 and does not need installation.

To use plone.app.contenttypes in Plone 4.x add this line in the eggs section of your buildout.cfg

eggs =
    ...
    plone.app.contenttypes

If you have a Plone site with mixed Archetypes and Dexterity content use the extra requirement atrefs.

eggs =
    ...
    plone.app.contenttypes [atrefs]

This will also install the package plone.app.referenceablebehavior that allows you to reference dexterity-based content from archetypes-based content. You will have to enable the behavior plone.app.referenceablebehavior.referenceable.IReferenceable for all types that need to be referenced by Archetypes-content.

What happens to existing content?

If you install plone.app.contenttypes in a existing site all Archetypes-based content of the default types still exists and can be viewed but can't be edited. On installation plone.app.contenttypes removes the type-definitions for the old default-types like this:

<object name="Document" remove="True" />

They are then replaced by new Definitions:

<object meta_type="Dexterity FTI" name="Document" />

To make the existing content editable again you need to migrate it to Dexterity (please see the section on migration) or uninstall plone.app.contenttypes (see the section on uninstalling).

Archetypes-based content provided by add-ons (e.g. Products.PloneFormGen) will still work since only the default-types are replaced.

If you install plone.app.contenttypes on a fresh site (i.e. when no content has been edited or added) the usual default-content (Events, News, Members...) will be created as dexterity-content.

Uninstalling

Uninstalling the default-types is not officially supported in Plone 5. If you really want to switch back to Archetypes-based types you have to to the following:

  • Go to the ZMI
  • In portal_types delete the default-types
  • In portal_setup navigate to the tab 'import', select the profile 'Archetypes Content Types for Plone' and install all steps including dependencies.

Any content you created based on plone.app.contenttypes will no longer be editable until you reinstall plone.app.contenttypes.

Dependencies

  • plone.app.dexterity >= 2.0.7. Dexterity is shipped with Plone 4.3.x. Version pins for Dexterity are included in Plone 4.2.x. For Plone 4.1.x you need to pin the right version for Dexterity in your buildout. See Installing Dexterity on older versions of Plone.
  • plone.dexterity >= 2.2.1. Olders version of plone.dexterity break the rss-views because plone.app.contenttypes uses behaviors for the richtext-fields.
  • plone.app.event >= 1.1.4. This provides the behaviors used for the event-type.
  • plone.app.portlets >= 2.5a1. In older version the event-portlet will not work with the new event-type.

These are the version-pins for Plone 4.3.4:

[buildout]
versions = versions

[versions]
plone.app.event = 1.1.4

Plone 4.3.3 also needs plone.app.portlets = 2.5.2

Plone-versions before 4.3.3 need to pin more packages:

[buildout]
versions = versions

[versions]
plone.dexterity = 2.2.1
plone.app.dexterity = 2.0.11
plone.schemaeditor = 1.3.5
plone.app.event = 1.1b1
plone.app.portlets = 2.5.1

For migrations to work you need at least Products.contentmigration = 2.1.9 and plone.app.intid (part of Plone since Plone 4.1.0).

Migration

Migrating the default-types

To migrate your existing content from Archetypes to Dexterity use the form at /@@atct_migrator.

Migrating Archetypes-based default-types content to plone.app.contenttypes

plone.app.contenttypes can migrate the following archetypes-based default types:

  • Document
  • Event
  • File
  • Folder
  • Image
  • Link
  • News Item
  • Collection
  • Topic (old Collections)

The following non-default types will also be migrated:

  • The AT-based Event-type provided by plone.app.event
  • The DX-based Event-type provided by plone.app.event
  • The Event-type provided by plone.app.contenttypes until version 1.0
  • News Items with blobs (provided by plone/plone.app.blob#2)
  • Files and Images without blobs

The migration tries to keep most features (including portlets, comments, contentrules, local roles and local workflows).

Warning: Versions of content are not migrated. During migration you will lose all old revisions.

Migrating only certain types

There is also a view /@@pac_installer that allows you to install plone.app.contenttypes without replacing those archetypes-types with the dexterity-types of which there are existing objects in the site. Afterwards it redirects to the migration-form and only the types that you chose to migrate are installed. This allows you to keep certain types as archetypes while migrating others to dexterity (for example if you did heavy customizations of these types and do not have the time to reimplement these features in dexterity).

Migrating Topics

Topics are migrated to Collections. However, the old type Topic had support for Subtopics, a feature that does not exit in Collections. Subtopics are nested Topics that inherited search terms from their parents. Since Collections are not folderish (i.e. they cannot contain content) Subtopics cannot be migrated unless Collections are made folderish (i.e. that they can contain content). Also the feature that search terms can be inherited from parents does not exist for Collections.

The migration-form will warn you if you have subtopics in your site and your Collections are not folderish. You then have several options:

  1. You can delete all Subtopics before migrating and achieve their functionality in another way (e.g. using eea.facetednavigation).

  2. You can choose to not migrate Topics by not selecting them. This will keep your old Topics functional. You can still add new Collections.

  3. You can modify Collections to be folderish or create your own folderish content-type. That type would need a base-class that inherits from plone.dexterity.content.Container instead of plone.dexterity.content.Item:

    from plone.app.contenttypes.behaviors.collection import ICollection
from plone.dexterity.content import Container
from zope.interface import implementer

@implementer(ICollection)
class FolderishCollection(Container):
    pass

    You can either use a new Collection type or simply modify the default type to use this new base-class by overriding the klass-attribute of the default Collection. To override add a Collection.xml in your own package:

    <?xml version="1.0"?>
<object name="Collection" meta_type="Dexterity FTI">
 <property name="klass">my.package.content.FolderishCollection</property>
</object>

    If you really need it you could add the functionality to inherit search terms to your own folderish Collections by extending the behavior like in the example at https://github.com/plone/plone.app.contenttypes/commit/366cc1a911c81954645ec6aabce925df4a297c63

Migrating content that is translated with LinguaPlone

Since LinguaPlone does not support Dexterity you need to migrate from LinguaPlone to plone.app.multilingual (http://pypi.python.org/pypi/plone.app.multilingual). The migration from Products.LinguaPlone to plone.app.multilingual should happen before the migration from Archetypes to plone.app.contenttypes. For details on the migration see-- http://pypi.python.org/pypi/plone.app.multilingual#linguaplone-migration

Migrating default-content that was extended with archetypes.schemaextender

The migration-form warns you if any of your old types were extended with additional fields using archetypes.schemaextender. The data contained in these fields will be lost during migration (with the exception of images added with collective.contentleadimage).

To keep the data you would need to write a custom migration for your types dexterity-behaviors for the functionality provided by the schemaextenders. This is an advanced development task and beyond the scope of this documentation.

Migrating images created with collective.contentleadimage

collective.contentleadimage was a popular addon that allows you to add images to any content in your site by extending the default types. To make sure these images are kept during migration you have to enable the behavior "Lead Image" on all those types where you want to migrate images added using collective.contentleadimage.

The old types that use leadimages are listed in the navigation-form with the comment "extended fields: 'leadImage', 'leadImage_caption'". The migration-form informs you which new types have the behavior enabled and which do not. Depending on the way you installed plone.app.contenttypes you might have to first install these types by (re-)installing plone.app.contenttypes.

Migrating in code (e.g. in a upgrade-step)

You can run the migration in your own code by using the view migrate_from_atct. Here is an example of an upgrade-step that migrates all default content-types.

def migrate_to_pac(setup):
  portal = api.portal.get()
  request = getRequest()
  pac_migration = api.content.get_view('migrate_from_atct', portal, request)
  pac_migration(
      migrate=True,
      content_types='all',
      migrate_schemaextended_content=True,
      reindex_catalog=False)

With content_types you can also pass a list of types to be migrated. Make sure to use the key from the dictionary plone.app.contenttypes.migration.vocabularies.ATCT_LIST to identify the types.

Migrating custom content

During migrations of the default types any custom content-types will not be migrated and will continue to work as expected.

Using the migration-form to migrate custom content

To help you migrating these types to Dexterity plone.app.contenttypes contains a migration form (/@@custom_migration) that allows you to migrate any (custom or default) Archetypes-type to any (custom or default) Dexterity-type. The only requirement is that the target-type (the Dexterity-type you want to migrate to) has to exist and that the class of the old type is still present. It makes no difference if the type you are migrating from is still registered in portal_types or is already removed or replaced by a dexterity-version using the same name.

In the form /@@custom_migration you can select a Dexterity-type for any Archetypes-types that exists in the portal. You can then map the source-types fields to the targets fields. You can also choose to ignore fields. You have to take care that the values can be migrated (since there is no validation for that), e.g. it would make no sense to migrate a ImageField to a TextField. There are build-in methods for most field-types, custom or rarely used fields might not migrate properly (you can create a issue if you miss a migration that is not yet supported).

After you map the fields you can test the configuration. During a test one item will be test-migrated and Plone checks if the migrated item will be accessible without throwing a errors. After the test any changes will be rolled back.

Migrating custom types in your own code

It is recommended that you reuse the migration-code provided by plone.app.contenttypes in plone.app.contenttypes.migration.migration.migrateCustomAT for custom migrations.

To do this you have to simply pass a mapping of source- to target-fields to a migration-method for each type.

from plone.app.contenttypes.migration.migration import migrateCustomAT

def my_custom_migration():
    fields_mapping = (
            {'AT_field_name': 'some_field',
             'DX_field_name': 'description',
             },

            # Migrate AT imagefield to DX imagefield using the mapping in
            # plone.app.contenttypes.migration.field_migrators.FIELDS_MAPPING
            {'AT_field_name': 'some_atimage',
             'DX_field_name': 'some_dximage',
             'DX_field_type': 'NamedBlobImage',
             },
    )
    migrateCustomAT(
        fields_mapping,
        src_type='SomeATType',
        dst_type='SomeDXType')

A field-dict without a key DX_field_type from one of the migrators in plone.app.contenttypes.migration.field_migrators.FIELDS_MAPPING will always use plone.app.contenttypes.migration.field_migrators.migrate_simplefield as its migration-method. That can migrate most field-types where the value does not have to change (e.g. strings, lists, tuples, dicts etc.).

plone.app.contenttypes.migration.field_migrators has special field migrators for the following field-types: RichText, NamedBlobFile, NamedBlobImage, Datetime, Date. They transform values from the Archetypes-version of such fields to their Dexterity counterparts.

Custom field-migrators

If you use rare or custom fields or want to apply special transforms to your data while migrating you can pass custom methods as field_migrator with the fields_mapping. This way you can migrate fields that are usually not migrateable.

Here is an example where this method is used to migrate a Richtext-Field into a Tuple-Field by passing the custom field-migrator some_field_migrator. In such a custom migrator you can do just about anything you wish.

from plone.app.contenttypes.migration.migration import migrateCustomAT


def some_field_migrator(src_obj, dst_obj, src_fieldname, dst_fieldname):
    """A simple example that transforms pipe-delimited richtext to a tuple.
    """
    field = src_obj.getField(src_fieldname)
    at_value = field.get(src_obj)
    at_value = at_value.replace('<p>', '').replace('</p>', '')
    dx_value = [safe_unicode(i) for i in at_value.split('|')]
    setattr(dst_obj, dst_fieldname, tuple(dx_value))


def my_custom_migration():
    """
    """
    fields_mapping = (
            # Migrate using our custom migrator
            {'AT_field_name': 'some_richtext_field',
             'DX_field_name': 'some_tuple_field',
             'field_migrator': some_field_migrator},
    )
    migrateCustomAT(
        fields_mapping,
        src_type='SomeATType',
        dst_type='SomeDXType')

Alternatively you could also extends the mapping from plone.app.contenttypes.migration.field_migrators.FIELDS_MAPPING to add new or replace existing migrators for specific field-types.

Migrating from old versions of plone.app.contenttypes

Before version 1.0a2 the content-items did not implement marker-interfaces. They will break in newer versions since the views are now registered for these interfaces (e.g. plone.app.contenttypes.interfaces.IDocument). To fix this you can call the view /@@fix_base_classes on your site-root.

Since plone.app.contenttypes 1.1a1, the Collection type uses the new Collection behavior and the Event type utilizes behaviors from plone.app.event. In order to upgrade:

  1. First run the default profile (plone.app.contenttypes:default) or reinstall plone.app.contenttypes
  2. Then run the upgrade steps.

Widgets

When used in Plone 4.x plone.app.contenttypes uses the default z3c.form widgets. All widgets work as they used to with Archetypes except for the keywords-widget for which a simple linesfield is used. Replacing that with a nicer implementation is explained below.

It is also possible to use plone.app.widgets to switch to the widgets that are used in Plone 5.

How to override widgets

To override the default keywords-widgets with a nicer widget you can use the package collective.z3cform.widgets.

Add collective.z3cform.widgets to your buildout and in your own package register the override in your configure.zcml:

<adapter factory=".subjects.SubjectsFieldWidget" />

Then add a file subjects.py

# -*- coding: UTF-8 -*-
from collective.z3cform.widgets.token_input_widget import TokenInputFieldWidget
from plone.app.dexterity.behaviors.metadata import ICategorization
from plone.app.z3cform.interfaces import IPloneFormLayer
from z3c.form.interfaces import IFieldWidget
from z3c.form.util import getSpecification
from z3c.form.widget import FieldWidget
from zope.component import adapter
from zope.interface import implementer


@adapter(getSpecification(ICategorization['subjects']), IPloneFormLayer)
@implementer(IFieldWidget)
def SubjectsFieldWidget(field, request):
    widget = FieldWidget(field, TokenInputFieldWidget(field, request))
    return widget

Once you install collective.z3cform.widgets in the quickinstaller, the new widget will then be used for all types.

Information for Addon-Developers

Design decisions

Schemata that are defined in XML-files using plone.supermodel allow editing those types' schemata through the web. This is the case for the default File, Image and Link content types. Schemata coming from behaviors, on the other hand, are not editable through the web. The Document, News Item, Folder and Event default types, for example, have no schemata of their own at all, all their fields are provided by behaviors.

Installation as a dependency from another product

If you want to add plone.app.contenttypes as a dependency from another products use the profile plone-content in your metadata.xml to have Plone populate a new site with DX-based default-content.

<metadata>
  <version>1</version>
    <dependencies>
        <dependency>profile-plone.app.contenttypes:plone-content</dependency>
    </dependencies>
</metadata>

If you use the profile default then the default-content in new sites will still be Archetypes-based. You'll then have to migrate that content using the migration-form @@atct_migrator or delete it by hand.

Using folderish types

At some point all default types will probably be folderish. If you want the default types to be folderish before that happens please look at https://pypi.python.org/pypi/collective.folderishtypes.

Changing the base class for existing objects

If you changed the base-class of existing types (e.g. because you changed them to be folderish) you also need to upgrade the base-class of existing objects. You can use the following form for this: @@base_class_migrator_form.

This form lets you select classes to be updated and shows the number of objects for each class. This form can be used to change the base-class of any dexterity-types instances. The migration will also transform itemish content to folderish content if the new class is folderish. You might want to use the method plone.app.contenttypes.migration.dxmigration.migrate_base_class_to_new_class in your own upgrade-steps.

Extending the types

You have several options:

  1. Extend the types through-the-web by adding new fields or behaviors in the types-controlpanel /@@dexterity-types.

  2. Extend the types with a custom type-profile that extends the existing profile with behaviors, or fields.

    You will first have to add the type to your [yourpackage]/profiles/default/types.xml.

    <?xml version="1.0"?>
<object name="portal_types" meta_type="Plone Types Tool">
  <object name="Folder" meta_type="Dexterity FTI" />
</object>

    Here is an example that enables the image-behavior for Folders in [yourpackage]/profiles/default/types/Folder.xml:

    <?xml version="1.0"?>
<object name="Folder" meta_type="Dexterity FTI">
 <property name="behaviors" purge="False">
  <element value="plone.app.contenttypes.behaviors.leadimage.ILeadImage"/>
 </property>
</object>

    By adding a schema-definition to the profile you can add fields.

    <?xml version="1.0"?>
<object name="Folder" meta_type="Dexterity FTI">
 <property name="model_file">your.package.content:folder.xml</property>
 <property name="behaviors" purge="False">
  <element value="plone.app.contenttypes.behaviors.leadimage.ILeadImage"/>
 </property>
</object>

    Put the schema-xml in your/package/content/folder.xml (the folder content needs a __init__.py)

    <model xmlns:security="http://namespaces.plone.org/supermodel/security"
       xmlns:marshal="http://namespaces.plone.org/supermodel/marshal"
       xmlns:form="http://namespaces.plone.org/supermodel/form"
       xmlns="http://namespaces.plone.org/supermodel/schema">
  <schema>
    <field name="teaser_title" type="zope.schema.TextLine">
      <description/>
      <required>False</required>
      <title>Teaser title</title>
    </field>
    <field name="teaser_subtitle" type="zope.schema.Text">
      <description/>
      <required>False</required>
      <title>Teaser subtitle</title>
    </field>
    <field name="teaser_details" type="plone.app.textfield.RichText">
      <description/>
      <required>False</required>
      <title>Teaser details</title>
    </field>
  </schema>
</model>

You could alternatively override the peroperty model_file of the type-definition with a empty string and use the property schema to provide your custom python-schema.

For more complex features you should always consider create custom behaviors and/or write your own content-types since that will most likely give you more flexibility and less problem when you want to upgrade to a newer version in the future.

For more information on custom dexterity-types and custom behaviors please read the dexterity documentation.

Differences to Products.ATContentTypes

  • The image of the News Item is not a field on the contenttype but a behavior that can add a image to any contenttypes (similar to http://pypi.python.org/pypi/collective.contentleadimage)
  • All richtext-fields are also provided by a reuseable behavior.
  • The functionality to transform (rotate and flip) images has been removed.
  • There is no more field Location. If you need georeferenceable consider using collective.geo.behaviour
  • The link on the image of the newsitem triggers an overlay
  • The link-type now allows the of the variables ${navigation_root_url} and ${portal_url} to construct relative urls.
  • The getQuery() function now returns a list of dict instead of a list of CatalogContentListingObject; use of getRawQuery() is deprecated.
  • The views for Folders and Collections changed their names and now share a common implementation (since version 1.2a8):
    • folder_listing_view (Folders) and collection_view (Collections) -> listing_view (Folders and Collections)
    • folder_summary_view (Folders) and summary_view (Collections) -> summary_view (Folders and Collections)
    • folder_tabular_view (Folders) and tabular_view (Collections) -> tabular_view (Folders and Collections)
    • folder_full_view (Folders) and all_content (Collections) -> full_view (Folders and Collections)
    • atct_album_view (Folders) and thumbnail_view (Collections) -> album_view (Folders and Collections)

Toubleshooting

Please report issues in the bugtracker at https://github.com/plone/plone.app.contenttypes/issues.

ValueError on installing

When you try to install plone.app.contenttypes < 1.1a1 in a existing site you might get the following error:

  (...)
  Module Products.GenericSetup.utils, line 509, in _importBody
  Module Products.CMFCore.exportimport.typeinfo, line 60, in _importNode
  Module Products.GenericSetup.utils, line 730, in _initProperties
ValueError: undefined property 'schema'

Before installing plone.app.contenttypes you have to reinstall plone.app.collection to update collections to the version that uses Dexterity.

Branches

The master-branch supports Plone 5 only. From this 1.2.x-releases will be cut.

The 1.1.x-branch supports Plone 4.3.x. From this 1.1.x-releases will be cut.

License

GNU General Public License, version 2

Contributors

About

Dexterity-based content types for Plone

pypi.python.org/pypi/plone.app.contenttypes

Resources

Readme
Activity

Stars

0 stars

Watchers

0 watching

Forks

0 forks
Report repository

Releases

101 tags

Packages

No packages published

Languages

  • Python 94.7%
  • RobotFramework 4.4%
  • CSS 0.9%