Small adjustments und Sapphire Plus (Both Versions) Software endstopp…

…s, when hemera is used. X-Bed Size now: 0mm..288mm Y-Bed Size now 0mm..296mm
RolfZuckowskiUltras · Jan 18, 2021 · c152a28 · c152a28
1 parent 6919764
commit c152a28
Show file tree

Hide file tree

Showing 5 changed files with 4 additions and 4 deletions.
diff --git a/Builds/Sapphire Plus Dual Z + Hemera/Robin_nano35.bin b/Builds/Sapphire Plus Dual Z + Hemera/Robin_nano35.bin
diff --git a/Builds/Sapphire Plus Dual Z/Robin_nano35.bin b/Builds/Sapphire Plus Dual Z/Robin_nano35.bin
diff --git a/Builds/Sapphire Plus Synced-Z + Hemera/Robin_nano35.bin b/Builds/Sapphire Plus Synced-Z + Hemera/Robin_nano35.bin
diff --git a/Builds/Sapphire Pro + Hemera/Robin_nano35.bin b/Builds/Sapphire Pro + Hemera/Robin_nano35.bin
diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h
@@ -61,7 +61,7 @@
 // Core XY
 //#define SAPPHIRE_PRO
 //#define SAPPHIRE_PLUS
-#define SAPPHIRE_PLUS_DUAL_Z //==> Read text since additional config is mandatory
+//#define SAPPHIRE_PLUS_DUAL_Z //==> Read text since additional config is mandatory
 /****************************************************************************
 Attention: On newer Sapphire Plus models (Probably manufactured after April 2020)
 the Z-Axis drives and endstopps have been changed to dual Z-Endstopps and
@@ -78,7 +78,7 @@ non-belt-synced drives. In this case, a additional configuration has to be done
 //===========================================================================
 //============================= Hotend-Preset================================
 //===========================================================================
-#define E3D_HEMERA //Only for Sapphire PLUS yet.
+//#define E3D_HEMERA //Only for Sapphire PLUS yet.
 
 //Modifies Thermistor Types, esteps, homing sequence (Y before X)
 // and min X-position (+8mm)
@@ -1886,10 +1886,10 @@ non-belt-synced drives. In this case, a additional configuration has to be done
 
       // Travel limits (mm) after homing, corresponding to endstop positions.
       #define X_MIN_POS -8 //mm to avoid colision with Endtopps / Z-Drive
-      #define Y_MIN_POS 4
+      #define Y_MIN_POS 0
       #define Z_MIN_POS 0
       #define X_MAX_POS 288
-      #define Y_MAX_POS 300
+      #define Y_MAX_POS 296
       #define Z_MAX_POS 327 //mm | Hemera is positioned a little bit lower.
 
     #else