Hexabackpack - Spaghetti management backpack with Backpack with FT EMS Hexes to enable flexible and fully modular mounting.
Inspired by DraftShift Design Fannypack and the excellent FT EMS mounting system by Fizzy's Tech.
Included the mounts from: https://www.printables.com/model/558357-ft-ems-mounts-repository for completeness
Draftshift Design Fannypack available here: https://github.com/DraftShift/CableManagement/tree/main/FannyPack
Renders
Pictures from N3MI
- 1x Hexabackpack_Backplate_Wall.stl
- 1x Hexabackpack_Backplate_Lid.stl
- 1x Hexabackpack_Backplate.stl
- 1x Hexabackpack_backplate_hexes.stl
- 1x Hexabackpack_mid_piece.stl
- 1x Draftshift Design Fannypack - center_rear_skirt_90.stl
- 1x Exhaust plate Umbilical management system by N3MI-DG
| Part | for | Amount | Description |
|---|---|---|---|
| M3x8 BHCS Screw | hexes+lid | 24 | M3 BHCS screw |
| M3 Heatset Nut | hexes | 16 | M3 Heatset M3, 5mm OD, 4mm length |
| 6x3 Countersunk N52 magnet | wall+backplate | 16 | 6x3 Countersunk N52 magnet (optionally you can use normal 6x3 magents and glue them in) |
| 2x8mm FHCS self-tapping screw | hexes | 8 | 2x8mm FHCS countersunk screw (if not glueing magnets) |
| 2m of 10mm wide 3M VHB double sided tape | attaching it to the back-panel | 10mm x 2m | can use thicker or thinner vhb too, and cut with scissors |