1.1.0-RC4 "Earnest Ewok"

Pre-release

Pre-release

thinkyhead released this 24 Mar 12:57

· 16598 commits to bugfix-2.1.x since this release

Commits since 1.1.0-RC3
All commits since 1.0.2-1
Top Contributors

CoreXY and CoreXZ:

#3127: XY BABYSTEPPING for CoreXY and CoreXZ
#2995: Add CORE support to st_get_position_mm (and elsewhere)

Hosts, GCode:

#3109: Add "Host Keepalive" (enabled by default) to inform hosts when Marlin is busy
#3219: Send position to hosts after some commands.
#2983: Remove "ok" from the output of M280, M301, M304, M851
#3052: Fix "M145" output in M503 report
#3108: Improved handling of M110 for hosts
#2985, #2987, #3051, #3044, #3027, #3111: Many more fixes for GCode handling

LCD Controllers and SD cards:

#3114: Option to reverse the click-wheel direction in menus
#3202: M303 PID Autotune from the LCD menu, applying the result
#3156: Fix CardReader::lsDive()
#3157: Use variable in lcd_erase_line()
#3151: Update the pt-br translation
#3116: Fix value edit click bugs
#2989: Blink XYZ on display when positions are uncertain
#2942: Better number format for editing Delta Jerk and Z Steps
#2973: Update splash screen with current no-domain
f18d3f4: LCD-based movement better-constrained for Deltas (#1869)

Minor bugs:

#2902: Fix Z min endstop stepper.cpp
#3161: Fix initial extruder direction for second/third/fourth extruder if they run inverted to the first
#3050, #3126: Fix stack overflow issue with many LCD movements
#3132: Fix a bad "heating failed" error when starting to reheat a warm extruder
#3092: Fix Printrboard with LCD
#3077: Prevent a kill() from rebooting with USE_WATCHDOG enabled
#3066: Fix disable_all_heaters() for MAX6675
#2848: Fix Rigidbot LCD Panel Support
#2821: Fix status LEDs update when reinitializing the display
#3222: Fix endstops disabling after homing, even without ENDSTOPS_ONLY_FOR_HOMING
#3197: Fix conflict between servos and PWM current control
#3177: Save all M665 parameters in EEPROM

Homing, Bed Leveling:

#3164: Fix #3160 - MESH_BED_LEVELING broke correct G1 movement in Z
#3107: MIN_Z_HEIGHT_FOR_HOMING replaces Z_RAISE_BEFORE_HOMING
#3107: Adjustments to Z Raise options for probes and homing
#3102: Bugfix: G28 was lifting Z-axis multiple times
#3013: Enhanced #3010 - formal Mesh/Manual dependency
#3057: Fix Z_RAISE_AFTER_PROBING for non DELTA printers
#3001: Fix Z-raise order with Z_SAFE_HOMING
#2978: Apply Auto Bed Leveling matrix when switching extruders
#3089: Fix raise_z_for_servo for Z offsets below the nozzle
#3124: Update the bed topography output in G29

New Hardware Support:

#3112: Formal support for the MAX31855 thermocouple
#3182: Support for Printrboard Rev F
#3086: Support for multiple PWM fans (for extruders)
#3201: Hephestos configuration improvements

New and Experimental Features:

#3069: Very New support for DELTA with M48 Probe Repeatability Test
#3043: Example configuration for Kossel XL
#2976: Move the experimental Configurator to its own repository

Configurations:

#2988: Automatically assign the next open E connector for Y2/Z2
#3131: Allow override of PWM_MOTOR_CURRENT in configuration
#3105: Much cleanup of configuration descriptions and code comments
#3053: Improve description for nozzle-to-probe offsets
#2986: Enable USE_WATCHDOG by default
#3031: Fix board type for Hephestos: RAMPS 1.4
#2868: Fix AUTOTEMP documentation in configs
#3018: K8200: sample config back in sync

And...

Many cleanups to the code: #2974, #2992, #2994, #3005, #3024, #3067, #3090, #3101, #3119, #3121, #3123, #3140, #3146, #3147, #3149, #3150, #3153, #3199
Lots of language improvements: #3180, #3192, #3194, #3217

Assets 2