Remove bootstrap nodes

README.md

@@ -57,8 +57,6 @@ p2p:
   listen_address: "0.0.0.0"
   port: 4445
   data_dir: "data/p2p"
-  bootstrap_nodes: ""
-  external_ip: ""
 
 # Lumera Chain Configuration
 lumera:
@@ -181,8 +179,6 @@ supernode start -d /path/to/basedir
 | `p2p.listen_address` | IP address for P2P networking | **Yes** | - | `"0.0.0.0"` | Use `"0.0.0.0"` to listen on all interfaces |
 | `p2p.port` | P2P communication port | **Yes** | - | `4445` | **Do not change this default value** |
 | `p2p.data_dir` | Directory for P2P data storage | No | `"data/p2p"` | `"data/p2p"` | Relative paths are appended to basedir, absolute paths used as-is |
-| `p2p.bootstrap_nodes` | Initial peer nodes for network discovery | No | `""` | `""` | Comma-separated list of peer addresses, leave empty for auto-discovery |
-| `p2p.external_ip` | Your public IP address | No | `""` | `""` | Leave empty for auto-detection, or specify your public IP |
 | `lumera.grpc_addr` | gRPC endpoint of Lumera validator node | **Yes** | - | `"localhost:9090"` | Must be accessible from supernode |
 | `lumera.chain_id` | Lumera blockchain chain identifier | **Yes** | - | `"lumera"` | Must match the actual chain ID |
 | `raptorq.files_dir` | Directory to store RaptorQ files | No | `"raptorq_files"` | `"raptorq_files"` | Relative paths are appended to basedir, absolute paths used as-is |

supernode/cmd/start.go

@@ -165,8 +165,8 @@ func initP2PService(ctx context.Context, config *config.Config, lumeraClient lum
 		ListenAddress:  config.P2PConfig.ListenAddress,
 		Port:           config.P2PConfig.Port,
 		DataDir:        config.GetP2PDataDir(),
-		BootstrapNodes: config.P2PConfig.BootstrapNodes,
-		ExternalIP:     config.P2PConfig.ExternalIP,
+		BootstrapNodes: "",
+		ExternalIP:     "",
 		ID:             address.String(),
 	}
 

supernode/cmd/supernode.go

@@ -83,8 +83,8 @@ func (s *Supernode) Start(ctx context.Context) error {
 		ListenAddress:  s.config.P2PConfig.ListenAddress,
 		Port:           s.config.P2PConfig.Port,
 		DataDir:        s.config.GetP2PDataDir(),
-		BootstrapNodes: s.config.P2PConfig.BootstrapNodes,
-		ExternalIP:     s.config.P2PConfig.ExternalIP,
+		BootstrapNodes: "",
+		ExternalIP:     "",
 		ID:             address.String(),
 	}
 

supernode/config.yml

@@ -9,15 +9,14 @@ supernode:
 # Keyring Configuration
 keyring:
   backend: "os"  # Options: test, file, os
-  dir: "keys"  # Keyring directory in home folder
+  dir: "keys"  # Keyring directory 
 
 # P2P Network Configuration
 p2p:
   listen_address: "0.0.0.0"
   port: 4445
   data_dir: "data/p2p"  # P2P data directory in home folder
-  bootstrap_nodes: ""  # Comma-separated list of bootstrap peer addresses
-  external_ip: ""  # External IP address for this node (if behind NAT)
+
 
 # Lumera Chain Configuration
 lumera:

supernode/config/config.go

@@ -23,11 +23,9 @@ type KeyringConfig struct {
 }
 
 type P2PConfig struct {
-	ListenAddress  string `yaml:"listen_address"`
-	Port           uint16 `yaml:"port"`
-	DataDir        string `yaml:"data_dir"`
-	BootstrapNodes string `yaml:"bootstrap_nodes"`
-	ExternalIP     string `yaml:"external_ip"`
+	ListenAddress string `yaml:"listen_address"`
+	Port          uint16 `yaml:"port"`
+	DataDir       string `yaml:"data_dir"`
 }
 
 type LumeraClientConfig struct {

supernode/config/save.go

@@ -52,11 +52,9 @@ func CreateDefaultConfig(keyName, identity, chainID string, keyringBackend, keyr
 			Dir:     keyringDir,
 		},
 		P2PConfig: P2PConfig{
-			ListenAddress:  "0.0.0.0",
-			Port:           4445,
-			DataDir:        "data/p2p",
-			BootstrapNodes: "",
-			ExternalIP:     "",
+			ListenAddress: "0.0.0.0",
+			Port:          4445,
+			DataDir:       "data/p2p",
 		},
 		LumeraClientConfig: LumeraClientConfig{
 			GRPCAddr: "localhost:9090",

tests/system/config.test-1.yml

@@ -16,14 +16,11 @@ p2p:
   listen_address: "0.0.0.0"
   port: 4445
   data_dir: "data/p2p"  # Relative to base_dir
-  bootstrap_nodes: ""
-  external_ip: ""
 
 # Lumera Chain Configuration
 lumera:
   grpc_addr: "localhost:9090"
   chain_id: "testing"
-  timeout: 300
 
 # RaptorQ Configuration
 raptorq:

tests/system/config.test-2.yml

@@ -17,14 +17,11 @@ p2p:
   listen_address: "0.0.0.0"
   port: 4447
   data_dir: "data/p2p"
-  bootstrap_nodes: ""
-  external_ip: ""
 
 # Lumera Chain Configuration
 lumera:
   grpc_addr: "localhost:9090"
   chain_id: "testing"
-  timeout: 300
 
 # RaptorQ Configuration
 raptorq:

tests/system/config.test-3.yml

@@ -17,14 +17,11 @@ p2p:
   listen_address: "0.0.0.0"
   port: 4449
   data_dir: "data/p2p"
-  bootstrap_nodes: ""
-  external_ip: ""
 
 # Lumera Chain Configuration
 lumera:
   grpc_addr: "localhost:9090"
   chain_id: "testing"
-  timeout: 300
 
 # RaptorQ Configuration
 raptorq: