lib: add FatFS library files

FatFS is an open source filesystem library supporting FAT12, FAT16, FAT32, and exFAT.  The source is available at http://elm-chan.org/fsw/ff/00index_e.html

Signed-off-by:  Eric Callahan <[email protected]>

lib/fatfs/LICENSE.txt

@@ -0,0 +1,24 @@
+FatFs License
+
+FatFs has being developped as a personal project of the author, ChaN. It is free from the code anyone else wrote at current release. Following code block shows a copy of the FatFs license document that heading the source files.
+
+/*----------------------------------------------------------------------------/
+/  FatFs - Generic FAT Filesystem Module  Rx.xx                               /
+/-----------------------------------------------------------------------------/
+/
+/ Copyright (C) 20xx, ChaN, all right reserved.
+/
+/ FatFs module is an open source software. Redistribution and use of FatFs in
+/ source and binary forms, with or without modification, are permitted provided
+/ that the following condition is met:
+/
+/ 1. Redistributions of source code must retain the above copyright notice,
+/    this condition and the following disclaimer.
+/
+/ This software is provided by the copyright holder and contributors "AS IS"
+/ and any warranties related to this software are DISCLAIMED.
+/ The copyright owner or contributors be NOT LIABLE for any damages caused
+/ by use of this software.
+/----------------------------------------------------------------------------*/
+
+Therefore FatFs license is one of the BSD-style licenses, but there is a significant feature. FatFs is mainly intended for embedded systems. In order to extend the usability for commercial products, the redistributions of FatFs in binary form, such as embedded code, binary library and any forms without source code, do not need to include about FatFs in the documentations. This is equivalent to the 1-clause BSD license. Of course FatFs is compatible with the most of open source software licenses include GNU GPL. When you redistribute the FatFs source code with changes or create a fork, the license can also be changed to GNU GPL, BSD-style license or any open source software license that not conflict with FatFs license.

lib/fatfs/diskio.h

@@ -0,0 +1,77 @@
+/*-----------------------------------------------------------------------/
+/  Low level disk interface modlue include file   (C)ChaN, 2019          /
+/-----------------------------------------------------------------------*/
+
+#ifndef _DISKIO_DEFINED
+#define _DISKIO_DEFINED
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Status of Disk Functions */
+typedef BYTE	DSTATUS;
+
+/* Results of Disk Functions */
+typedef enum {
+    RES_OK = 0,		/* 0: Successful */
+    RES_ERROR,		/* 1: R/W Error */
+    RES_WRPRT,		/* 2: Write Protected */
+    RES_NOTRDY,		/* 3: Not Ready */
+    RES_PARERR		/* 4: Invalid Parameter */
+} DRESULT;
+
+
+/*---------------------------------------*/
+/* Prototypes for disk control functions */
+
+
+DSTATUS disk_initialize (BYTE pdrv);
+DSTATUS disk_status (BYTE pdrv);
+DRESULT disk_read (BYTE pdrv, BYTE* buff, LBA_t sector, UINT count);
+DRESULT disk_write (BYTE pdrv, const BYTE* buff, LBA_t sector, UINT count);
+DRESULT disk_ioctl (BYTE pdrv, BYTE cmd, void* buff);
+
+
+/* Disk Status Bits (DSTATUS) */
+
+#define STA_NOINIT		0x01	/* Drive not initialized */
+#define STA_NODISK		0x02	/* No medium in the drive */
+#define STA_PROTECT		0x04	/* Write protected */
+
+
+/* Command code for disk_ioctrl fucntion */
+
+/* Generic command (Used by FatFs) */
+#define CTRL_SYNC			0	/* Complete pending write process (needed at FF_FS_READONLY == 0) */
+#define GET_SECTOR_COUNT	1	/* Get media size (needed at FF_USE_MKFS == 1) */
+#define GET_SECTOR_SIZE		2	/* Get sector size (needed at FF_MAX_SS != FF_MIN_SS) */
+#define GET_BLOCK_SIZE		3	/* Get erase block size (needed at FF_USE_MKFS == 1) */
+#define CTRL_TRIM			4	/* Inform device that the data on the block of sectors is no longer used (needed at FF_USE_TRIM == 1) */
+
+/* Generic command (Not used by FatFs) */
+#define CTRL_POWER			5	/* Get/Set power status */
+#define CTRL_LOCK			6	/* Lock/Unlock media removal */
+#define CTRL_EJECT			7	/* Eject media */
+#define CTRL_FORMAT			8	/* Create physical format on the media */
+
+/* MMC/SDC specific ioctl command */
+#define MMC_GET_TYPE		10	/* Get card type */
+#define MMC_GET_CSD			11	/* Get CSD */
+#define MMC_GET_CID			12	/* Get CID */
+#define MMC_GET_OCR			13	/* Get OCR */
+#define MMC_GET_SDSTAT		14	/* Get SD status */
+#define ISDIO_READ			55	/* Read data form SD iSDIO register */
+#define ISDIO_WRITE			56	/* Write data to SD iSDIO register */
+#define ISDIO_MRITE			57	/* Masked write data to SD iSDIO register */
+
+/* ATA/CF specific ioctl command */
+#define ATA_GET_REV			20	/* Get F/W revision */
+#define ATA_GET_MODEL		21	/* Get model name */
+#define ATA_GET_SN			22	/* Get serial number */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif