A couple of anthead mods

UserMods/voney/AntHead/HGX-Lite_Adaptor/README.md

@@ -0,0 +1,35 @@
+# AntHead HGX‑Lite Adaptor and Backplate
+
+![Assembed AntHead with HGX-Lite Extruder and EBB mount](./images/AntHead_HGX_EBB.png)
+
+This UserMod adds a **spacer plate** and a **modified backplate** so an
+**HGX‑Lite extruder** can be used on AntHead together with **Tavroswyn's EBB36
+mount** (rear CAN toolhead board).
+
+In practice, the HGX‑Lite body is raised and the rear heat‑set mounting bosses
+on the backplate are extended to match the HGX-Lite's mounting.
+
+> **Note:** The geometry was designed with a 22mm deep stepper in wind with 20mm
+> standoffs. If your stepper is longer you may need to adjust things.
+
+## Contents
+
+Files in this folder:
+
+- `AntHead_HGX_Adaptor_Plate.step`
+- `Anthead_HGX_Adaptor_Plate.3mf`
+	- Spacer plate that sits between the AntHead main body and the HGX‑Lite
+		extruder, lifting it by 7.25 mm and matching the bolt pattern.
+
+- `Anthead_Backplate_HGX_Lite.step`
+- `Anthead_Backplate_HGX_Lite_SF.3mf`
+- `Anthead_Backplate_HGX_Lite_HF.3mf`
+	- Modified AntHead backplate with the EBB36 mounting pattern and extended
+		rear heat‑set locations.
+	- `SF` and `HF` variants correspond to **Standard‑flow** and **High‑flow**
+		AntHead setups. (UHF is not currently included.)
+
+## Credits
+
+- The HGX‑Lite backplate variant in this folder is based on and adapted from the
+  AntHead backplate work by [Tavroswyn](../../../Tavroswyn/Anthead/README.md)

UserMods/voney/AntHead/Numbered_LEDs/README.md

@@ -0,0 +1,88 @@
+# AntHead Numbered LEDs – All Sizes Edition
+
+This folder contains 3MF and STEP files for numbered AntHead cowls with rear‑lit
+cutouts, matching light diffusers, and light blockers, covering **all current
+AntHead cowl variants**.
+
+## Overview
+
+AntHead cowls come in:
+- **2 extruder mount styles**: Orbiter 2 and Sherpa Mini
+- **3 lengths**: Standard, High Flow (**HF**), and Ultra High Flow (**UHF**)
+
+This gives 6 base cowls. Each base cowl here is provided in **6 numbered
+versions (`0–5`)**, for a total of **36 numbered cowls**, each with:
+- A **front cowl** with a numeric cutout
+- A matching **rear light diffuser**
+- A matching **internal light blocker** for the rear‑mounted LED (as supported
+  by AntHead’s existing logo cowls)
+
+In addition, this project includes an **optional PTFE tube "negative"** part
+used to cut a straight PTFE pass‑through hole in the main body for people who do
+**not** want to use AntHead’s Leaf Cutter (filament cutter).
+
+## Contents
+
+- **STEP file** of the full project
+  - Combined reference model showing the modified numbered cowls.
+
+- **3MF project files** for each combination of:
+	- Mount: `Orbiter 2` / `Sherpa Mini`
+	- Length: `Standard` / `HF` / `UHF`
+	- Number: `0–5`
+
+	Each 3MF is pre‑arranged to include:
+	- The numbered cowl body for the chosen mount/length
+	- A **PTFE tube negative** part already positioned and active
+- **3MF project files** for the light blockers and light diffusers. Each 3MF file
+  contains all parts 0-5.
+
+## Using the PTFE Tube Negative
+
+For users who don’t want to run AntHead’s Leaf Cutter:
+- The **PTFE tube negative** is positioned inside the cowl body in the 3MF.
+- When sliced as‑is, it will **subtract** the PTFE tube path, leaving a clean,
+  printed hole.
+- If you *do* want to keep the stock Leaf Cutter arrangement instead, simply
+  **delete or deactivate the negative** part in your slicer before slicing.
+
+## Printing Notes
+
+- Refer to the main AntHead documentation for **material, temperature, and
+  cooling recommendations**.
+- Ensure your **rear LED** is installed as per AntHead’s LED/logo documentation
+  – these cowls are drop‑in replacements that reuse the same LED mounting and
+  wiring.
+
+## Credits & Attribution
+
+- Based on [**AntHead**](https://github.com/PrintersForAnts/AntHead), by
+  [hartk](https://github.com/hartk1213) using v96 [of the official AntHead STEP
+  file](https://github.com/PrintersForAnts/AntHead/blob/46a0f00b76af94977a647d08f8f5e4239b60149e/CAD/AntHead_Assembly%20v96.zip).
+- Inspired by the earlier [0-5 numbered cowls](../traxman25/Ant%20Head) by
+  **Traxman25**, who provided cowls for **Orbiter 2 / Standard length**. This
+  variant extends that idea to **all current AntHead cowl mount/length
+  combinations**, with matching diffusers and light blockers.
+> **NOTE**: The light blockers and diffusers here were made from scratch and are
+> **NOT** cross-compatible with Traxman25's work.
+
+AntHead is an independent project with its own licensing and documentation;
+please refer to the official AntHead repo/docs for details and updates.
+
+If you have questions or run into issues with these files, you can reach me on
+the StealthChanger Discord as **MF-SHROOM**.
+
+## License
+
+These files are **derived from AntHead**, which is licensed under the
+**GNU General Public License v3.0 (GPL‑3.0)**. In accordance with that license:
+
+- The STEP and 3MF files in this folder are distributed under **GPL‑3.0**.
+- A copy of the **GPL‑3.0 license text** should be included alongside this
+  folder (for example as `LICENSE` or `COPYING`).
+- The included STEP file represents the **preferred form for modification** of
+  these numbered cowls.
+
+This licensing applies to the contents of this folder only and does not change
+the license of the broader StealthChanger project, nor my other UserMods.
+

UserMods/voney/README.md

@@ -0,0 +1,11 @@
+# MF-SHROOM's StealthChanger Mods
+
+Various mods that have arisen from my 2.4 300 rebuild.
+
+If you have questions or run into issues with these files, you can reach me on
+the StealthChanger Discord as **MF-SHROOM**.
+
+## Ant Head
+
+- [AntHead Numbered LEDs – All Sizes Edition](./AntHead/Numbered_LEDs)
+- [HGX-Lite Adaptor](./AntHead/HGX-Lite_Adaptor)