NETHERCAP V3.0.4 for ESP8266 (TRIAL)

Changelog:

• New : Precise Deauth V2. Now can deauth stations that have MAC randomization enabled.
• Precise deauth now shows numbers of Reassociation and Reauthentication requests.
• Target list now sorted based on signal strength.

Pricing:
IDR 40,000
USDT $5 (crypto)

The price above is for 1 copy of binary file and it cannot be duplicated.

For the trial version, I recommend using the following board:

Wemos D1 Mini (4 MB) with a 0.66-inch or larger display, using the SSD1306 driver.

NETHERCAP V1.0.1 for ESP32 (TRIAL)

THIS BUILD ONLY SUPPORTS ESP32DEVKIT !!!

Changelog:

• Fixed : Deauth not working when the user is still connected to SoftAP.
• New : RogueAP.
• New : Reveal SSID (beta). Get real SSID of hidden networks. Tap the target then tap "Reveal SSID".
• New : Hide AP.
• Rearranged OLED UI.

Pricing:
IDR 40,000
USDT $5 (crypto)

The price above is for 1 copy of binary file and it cannot be duplicated.

For the trial version, I recommend using the following board:

ESP32DevKit (4 MB) with a 0.96-inch or larger display, using the SSD1306 driver.

OLED pin scheme:
GND->GND
VDD->3v3
SCK->D22
SDA->D21

NETHERCAP V3.0.2 for ESP8266 (TRIAL)

Changelog:

• Revamped UI. Now using blue color palette instead of green
• New feature : Reveal SSID. Get original SSID from hidden Wi-Fi networks. This feature requires at least 1 client connected to the target
• Fixed : Welcome and warning page shows up if Evil-Twin is started using buttons
• Improved Wi-Fi extender performance
• Optimized RAM usage

Pricing:
IDR 40,000
USDT $5 (crypto)

The price above is for 1 copy of binary file and it cannot be duplicated.

For the trial version, I recommend using the following board:

Wemos D1 Mini (4 MB) with a 0.66-inch or larger display, using the SSD1306 driver.

NETHERCAP V2.8.3 for ESP8266 (TRIAL)

"I swear the bug is totally gone!"
Edit : no, it is not.

Changelog:

• New Feature: Emergency Mode — reflash the firmware in case your NETHERCAP device is experiencing boot loops.
• Fixed some bugs that exist in earlier versions.
• Fixed buffer overflow error that causes AP SSID bug.
• Improved web server responsiveness.
• Enhanced web server stability by further reducing RAM usage.
• New Feature: Extender MAC Randomizer — randomizes the MAC address before performing Range Extender.

Due to some individuals removing my name and falsely claiming that NETHERCAP is their own work (A.K.A. stealing), I am no longer offering a free version of NETHERCAP. Instead, I now provide a free trial version that lasts for 10 minutes. You can purchase the full version by contacting me on Telegram. The purchased version includes custom OLED display and SPI Flash memory configuration.

Pricing:
IDR 40,000
USDT $5 (crypto)

The price above is for 1 copy of binary file and it cannot be duplicated.

For the trial version, I recommend using the following board for the best performance:

• Wemos D1 Mini (4 MB) with a 0.96-inch or larger display, using the SSD1306 driver.

Although you can flash it onto other boards and it will still work, it performs best on the board described above.

Found issues :

• If evil-twin is started by using buttons, the cloned SSID will show welcome page. To fix this, you have go through welcome and warning page manually.

NETHERCAP 0.9 FOR BW16 (TRIAL)

Please read this first if this is your first time installing on BW16 board:
https://github.com/Cancro29/NETHERCAP/releases/tag/V.0.6.4-bw16

Changelog:

• Added button to hide/unhide SSID
• Added ability to scan hidden SSID
• Fixed a case where changing AP SSID or AP Password makes AP disappear completely
• Reduced the chance AP goes missing during deauthentication
• Reduced the chance web server hanging during deauthentication
• Added BSSID column on target list

This is trial version with limited usage time. You must restart it by pushing RESET button to use it again
You can buy the unrestricted version by contacting me on Telegram.

Pricing:
USD/USDT $5
IDR 50.000

The price above is for a copy for 1 installer, and it cannot be duplicated.

The price above includes 2x free update. After that, you have to buy again

NETHERCAP 0.6.4 FOR BW16 (TRIAL)

The first release of NETHERCAP for BW16 based on Realtek RTL8720dn MCU. Thanks to tesa-klebeband (https://github.com/tesa-klebeband) for allowing me to use his code.

This fork is made with several optimizations :

1. The webserver will always on even when deauth is active
2. The client will not get kicked out from webserver while scanner is running
3. Support for multiple target selection across 2.4 Ghz and 5 Ghz band
4. Support for changing AP SSID and AP Password

How to flash:
The software is packed in a Windows executable, just open it and type your COM port.

• If the executable flasher does not work properly, try to disable/pause your antivirus first
• If you have successfully flashed the software but NETHERCAP SSID does not appear, use NETHERCAP_BW16_Reset.exe to wipe it first. This is mandatory for freshly-bought boards that never been programmed before.
• If your BW16 board has purple PCB, has "NiceMCU" text beneath the PCB, and has text "BW16E" on its EMI shield, this software will not work. That particular board does not support 5 Ghz due to wrong component configuration.

The software can be controlled by opening 192.168.1.80 on browser.

Before flashing this software, you must ensure that:

1. Your BW16 board MUST equipped with built-in USB to Serial Chip on it (ex. CH340)
2. You understand the concept of flashing and erasing RTL8720dn-based board so you would't get panic if something goes wrong.
3. Using this software in unauthorized environment will likely to get you into trouble and that is YOUR responsibility.
4. You can't flash it using mobile phones (sorry mobile phone users :P)
5. The web server control does not work on Apple devices

This is trial version with limited usage time. You must restart it by pushing RESET button to use it again
You can buy the unrestricted version by contacting me on Telegram.

Price:
USD/USDT $4
IDR 50.000

NETHERCAP V2.7.2 for ESP8266

Changelog :

1. Fixed -> AP SSID being stuck or inconsistent
2. Fixed -> Captive portal does not load on Apple devices
3. Fixed -> Precise Deauth cannot be disabled
4. Fixed -> AP SSID becomes messed up if saved with uncommon alphabet. Mostly noticeable on Polish and Vietnamese text.
5. Fixed -> "No target is selected" pops up even though there are target selected.
6. Fixed -> Screen flickers when performing button hold
7. Target channels now updated automatically to ensure deauthing stays effective
8. Added channel column on target list

Warning:
If you have version 2.6 or below installed, you must wipe your ESP8266 first before flashing or it won't turn on. I don't recommend using OTA update to flash this version.

NETHERCAP V2.7 for ESP8266

NETHERCAP 2.7 :

1. New feature -> Precise Deauth. Deauth routers that immune to common deauth method.
2. New feature -> True Deauth / Pseudo-jammer. A new deauth method where it deauth any 2.4 Ghz wifi networks. The difference from Deauth All is this method does not require scanning and works instantly. The downside is you will lose web server control similar to Observe/Count stations
3. Fixed -> Observe Stations / Count Stations feature corrupting target lists.
4. Updated -> Observe Stations / Count Stations now captures the number of data packet. More data packets means that user is actively using the network.
5. Updated -> Local remote file transfer. Fixed some bug and edge cases that causes soft-lock.
6. Updated -> Revamped web server engine. Now web server uses much less RAM, making it even more responsive.
7. Fixed -> The text in default Evil-Twin page is now aligned properly.
8. Added BW16 support that enables 5 Ghz deauthing. This will be disabled until BW16 deauther is ready.
9. Fixed -> Sometimes target counter on admin page incorrectly count target list.
10. Fixed -> Saving AP SSID while Evil-Twin is active will corrupt the setting, causing it to use the last known SSID. If this bug happened again, it will just revert to NETHERCAP.
11. Restored target slot to 32

Known bugs:

1. Captive portal does not work on Apple devices.
2. Precise deauth cannot be disabled using "Stop Precise Deauth" button. This will be fixed on next update.
3. Holding control buttons will make display flicker, this is only visual bug that does not affect functionality.

Warning:
As this update counts as major update, it is recommended to wipe your ESP8266 first before flashing. I don't recommend using OTA update to flash this version.

Use NETHERCAP Flasher to erase or flashing. Download both exe files to make sure it is working properly. Don't worry if your antivirus detect it as malware, it is malware-free and the reason it gets detected because it has wipe feature on it.

There are numerous bugs that prevent it from starting up or being connected by phones/laptop. If that bug happened to you, you can revert to version 2.6

NETHERCAP Alpha V.0.7 for ESP-32

Precompiled build for ESP-32 Dev Kit and Seeed Studio Xiao ESP32C3 with 4 MBytes of Flash.

What's new :

1. Packet counter will show up in Deauth button
2. Added HTML Menu
3. Reworked Extender (BETA). Still need more tests and feedback
4. True deauth. Deauth all AP in almost real time. Basically Deauth All but it constantly scans for Access Points
5. Added power saving option for battery-powered boards
6. Added English/Indonesian languange switcher for default Evil-Twin captive page
7. Added ability to change SoftAP channel in settings
8. Added option to enable/disable captive portal. It will be always enabled when Evil-Twin is active
9. Significantly improved start-up time
10. OTA updater now provides real-time progress percentage
11. Selecting already selected AP will make it unselected

What's not working:

1. Rogue AP

How to install :

1. Make sure you have installed USB-SERIAL driver
2. Download all files
3. Open ESP32 Download Tool
4. Under 'SPIDownload' tab. Add the binary file and set the address to 0x0
5. Choose your COM Port
6. Select Baud Rate
7. Click 'START'
8. Wait until it finished