Add new cmdlets for Azure data transfer

src/AzureDataTransfer/AzureDataTransfer.Autorest/.gitattributes

@@ -0,0 +1 @@
+* text=auto

src/AzureDataTransfer/AzureDataTransfer.Autorest/.gitignore

@@ -0,0 +1,16 @@
+bin
+obj
+.vs
+generated
+internal
+exports
+tools
+test/*-TestResults.xml
+license.txt
+/*.ps1
+/*.psd1
+/*.ps1xml
+/*.psm1
+/*.snk
+/*.csproj
+/*.nuspec

src/AzureDataTransfer/AzureDataTransfer.Autorest/Properties/AssemblyInfo.cs

@@ -0,0 +1,26 @@
+// Copyright (c) Microsoft Corporation. All rights reserved.
+// Licensed under the Apache License, Version 2.0 (the ""License"");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+// http://www.apache.org/licenses/LICENSE-2.0
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an ""AS IS"" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+// Code generated by Microsoft (R) AutoRest Code Generator.Changes may cause incorrect behavior and will be lost if the code
+// is regenerated.
+
+using System;
+using System.Reflection;
+using System.Runtime.CompilerServices;
+using System.Runtime.InteropServices;
+
+[assembly: System.Reflection.AssemblyCompanyAttribute("Microsoft")]
+[assembly: System.Reflection.AssemblyCopyrightAttribute("Copyright © Microsoft")]
+[assembly: System.Reflection.AssemblyProductAttribute("Microsoft Azure PowerShell")]
+[assembly: System.Reflection.AssemblyTitleAttribute("Microsoft Azure PowerShell - AzureDataTransfer")]
+[assembly: System.Reflection.AssemblyFileVersionAttribute("0.1.0.0")]
+[assembly: System.Reflection.AssemblyVersionAttribute("0.1.0.0")]
+[assembly: System.Runtime.InteropServices.ComVisibleAttribute(false)]
+[assembly: System.CLSCompliantAttribute(false)]

src/AzureDataTransfer/AzureDataTransfer.Autorest/README.md

@@ -0,0 +1,226 @@
+<!-- region Generated -->
+# Az.DataTransfer
+This directory contains the PowerShell module for the DataTransfer service.
+
+---
+## Info
+- Modifiable: yes
+- Generated: all
+- Committed: yes
+- Packaged: yes
+
+---
+## Detail
+This module was primarily generated via [AutoRest](https://github.com/Azure/autorest) using the [PowerShell](https://github.com/Azure/autorest.powershell) extension.
+
+## Module Requirements
+- [Az.Accounts module](https://www.powershellgallery.com/packages/Az.Accounts/), version 2.7.5 or greater
+
+## Authentication
+AutoRest does not generate authentication code for the module. Authentication is handled via Az.Accounts by altering the HTTP payload before it is sent.
+
+## Development
+For information on how to develop for `Az.DataTransfer`, see [how-to.md](how-to.md).
+<!-- endregion -->
+
+### AutoRest Configuration
+
+> see [def](https://aka.ms/autorest)
+
+```yaml
+# pin the swagger version by using the commit id instead of branch name
+commit: c424d91129a85194f3a0800a6bb5dcd28f8eb6eb
+namespace: ADT
+require:
+# readme.azure.noprofile.md is the common configuration file
+  - $(this-folder)/../../readme.azure.noprofile.md
+  - $(repo)/specification/azuredatatransfer/resource-manager/readme.md
+# If the swagger has not been put in the repo, you may uncomment the following line and refer to it locally
+# - (this-folder)/relative-path-to-your-local-readme.md
+
+try-require: 
+  - $(repo)/specification/azuredatatransfer/resource-manager/readme.powershell.md
+
+# For new RP, the version is 0.1.0
+module-version: 0.1.0
+# Normally, title is the service name
+title: AzureDataTransfer
+subject-prefix: DataTransfer
+
+# The next three configurations are exclusive to v3, and in v4, they are activated by default. If you are still using v3, please uncomment them.
+# identity-correction-for-post: true
+# resourcegroup-append: true
+# nested-object-to-string: true
+
+## Flags to use PATCH method for Update-*
+disable-getput: true
+disable-transform-identity-type: true
+flatten-userassignedidentity: false
+
+directive:
+  # Following are common directives which are normally required in all the RPs
+  # 1. Remove the unexpanded parameter set
+  # 2. For New-* cmdlets, ViaIdentity is not required
+  # Following two directives are v4 specific
+  - where:
+      variant: ^(Create|Update)(?!.*?(Expanded|JsonFilePath|JsonString))
+    remove: true
+  - where:
+      variant: ^CreateViaIdentity.*$
+    remove: true
+  # Follow directive is v3 specific. If you are using v3, uncomment following directive and comments out two directives above
+  #- where:
+  #    variant: ^Create$|^CreateViaIdentity$|^CreateViaIdentityExpanded$|^Update$|^UpdateViaIdentity$
+  #  remove: true
+
+  # Remove the set-* cmdlet
+  - where:
+      verb: Set
+    remove: true
+
+  - remove-operation: AzureDataTransfer_validateSchema
+  - remove-operation: AzureDataTransfer_listApprovedSchemas
+  # - remove-operation: Flows_Get
+  # - remove-operation: Flows_CreateOrUpdate
+  # - remove-operation: Flows_Delete
+  # - remove-operation: Flows_Update
+  # - remove-operation: Flows_Enable
+  # - remove-operation: Flows_Disable
+  # - remove-operation: Flows_Link
+  - remove-operation: Flows_SetPassphrase
+  - remove-operation: Flows_GeneratePassphrase
+  - remove-operation: Flows_GetSourceAddresses
+  - remove-operation: Flows_SetSourceAddresses
+  - remove-operation: Flows_GetDestinationEndpoints
+  - remove-operation: Flows_SetDestinationEndpoints
+  - remove-operation: Flows_GetDestinationEndpointPorts
+  - remove-operation: Flows_SetDestinationEndpointPorts
+  - remove-operation: Flows_GetStreamConnectionString
+  # - remove-operation: Flows_ListByConnection
+  # - remove-operation: Connections_Get
+  # - remove-operation: Connections_CreateOrUpdate
+  # - remove-operation: Connections_Delete
+  # - remove-operation: Connections_Update
+  # - remove-operation: Connections_Link
+  # - remove-operation: ListPendingConnections_List
+  # - remove-operation: ListPendingFlows_List
+  # - remove-operation: Connections_ListByResourceGroup
+  # - remove-operation: Connections_ListBySubscription
+  # - remove-operation: Pipelines_Get
+  - remove-operation: Pipelines_CreateOrUpdate
+  - remove-operation: Pipelines_Delete
+  - remove-operation: Pipelines_Update
+  # - remove-operation: Pipelines_ApproveConnection
+  # - remove-operation: Pipelines_RejectConnection
+  - remove-operation: ListSchemas_List
+  # - remove-operation: Pipelines_ListByResourceGroup
+  # - remove-operation: Pipelines_ListBySubscription
+  - remove-operation: Operations_List
+  - remove-operation: ListFlowsByPipeline_List
+  - remove-operation: Pipelines_ExecuteAction
+
+  - where:
+      parameter-name: Pipeline
+    set:
+      parameter-name: PipelineName
+
+  - where:
+      parameter-name: IdentityUserAssignedIdentity
+    set:
+      parameter-name: UserAssignedIdentity
+
+  # Rename to avoid codegen errors
+  - from: swagger-document
+    where: $.definitions.streamSourceAddresses.properties.sourceAddresses
+    transform: $['x-ms-client-name'] = 'AddressList'
+  - from: swagger-document
+    where: $.definitions.flowProperties.properties.connection
+    transform: $['x-ms-client-name'] = 'FlowPropertiesConnection'
+
+  # Rename approve/reject ConnectionId param
+  - where:
+      verb: Invoke
+      subject: ^RejectPipelineConnection$
+      parameter-name: Id
+    set:
+      parameter-name: ConnectionId
+
+  - where:
+      verb: Approve
+      subject: ^PipelineConnection$
+      parameter-name: Id
+    set:
+      parameter-name: ConnectionId
+
+  # Rename approve/reject Connection cmdlets
+  - where:
+      verb: Invoke
+      subject: ^RejectPipelineConnection$
+    set:
+      verb: Deny
+      subject: Connection
+
+  - where:
+      verb: Approve
+      subject: ^PipelineConnection$
+    set:
+      subject: Connection
+
+  # Rename Link cmdlets
+  - where:
+      verb: Invoke
+      subject: ^LinkConnection$
+      parameter-name: Id
+    set:
+      parameter-name: PendingConnectionId
+
+  - where:
+      verb: Invoke
+      subject: ^LinkFlow$
+      parameter-name: Id
+    set:
+      parameter-name: PendingFlowId
+
+  - where:
+      verb: Invoke
+      subject: ^LinkConnection$
+    set:
+      subject: LinkPendingConnection
+
+  - where:
+      verb: Invoke
+      subject: ^LinkFlow$
+    set:
+      subject: LinkPendingFlow
+
+  # Hide unneeded params
+  - where:
+      verb: New
+      subject: ^Connection$
+      parameter-name: Policy
+    hide: true
+
+  - where:
+      verb: New|Update
+      subject: ^Flow$
+      parameter-name: Policy
+    hide: true
+
+  - where:
+      verb: New|Update
+      subject: ^Flow$
+      parameter-name: KeyVaultUri
+    hide: true
+
+  - where:
+      verb: New|Update
+      subject: ^Flow$
+      parameter-name: ^FlowProperty*
+    hide: true
+
+  - where:
+      verb: Update
+      subject: ^Flow$
+      parameter-name: DestinationEndpoint|DestinationEndpointPort|Passphrase|SourceAddressList
+    hide: true
+```