Create an Open5GS container

This is WIP

Before starting, make sure you have already followed the instructions in RAN-Machines-Prep.

Create a new container with Ubuntu 22.04, we will call it open5gs-core:

lxc init ubuntu:22.04 open5gs-core

Now we must assign it a static IP address inside the LXD bridge. Usually the bridge interface is called lxcbr0, with subnet 10.0.3.1\24. Our convention is that the default Open5GS container should always have ip 10.0.3.2. Set a static IP with the following command:

lxc config device set open5gs-core eth0 ipv4.address 10.0.3.2