Unable to set WW to standby

[framps]

I just tried to set my WW to standby with
mosquitto_pub -h 192.168.0.12 -t wolf/WWSystem_BM-2_0x35/set/Programmwahl/35012/text -m Standby

According

Example topics to update single properties:

Wolf/<ism7 ip address>/WWSystem_BM-2_0x35/set/Programmwahl/35012/value
Wolf/<ism7 ip address>/WWSystem_BM-2_0x35/set/Programmwahl/35012/text

this should work. But unfortunately it doesn't work for me :-(

I used

./findExistingISM7MQTTparameters.sh programmwahl
>>> "Programmwahlschalter gemeinsam": BM-2 - 220108
>>> "BUSCONFIG_Programmwahlschalter-Gemeinsam": BM-2 - 220130
>>> "Programmwahl": DHK_BM-2 - 340029
>>> "Programmwahl": DHK_BM-2 - 340032
>>> "Programmwahl": WWSystem_BM-2 - 350012
>>> "Programmwahl": WWSystem_BM-2 - 350015

to detect the correct ids but

neither 350012 nor 350015 works.

Would be great to get my Wolf system to accept any modifications. What do I miss?

[zivillian]

Hmm... Bad documentation...

The path you tried is only used for duplicate parameter names. Normally the path does not include the parameter id. You can check at which topic the current value is reported and just insert the set/ after the device.
I guess it would be wolf/WWSystem_BM-2_0x35/set/Programmwahl/text

[framps]

Bad documentation...

NP. Doc is the last thing a developer cares of 😉

Unfortunately mosquitto_pub -h 192.168.0.12 -t wolf/WWSystem_BM-2_0x35/set/Programmwahl/text -m Standby doesn't work. I also tried standby as argument - just to make sure there is no case issue - but it doesn't work :-(

[framps]

Thank you very much for your hint. Actually there was a major typo in the topic I used: I used wolf instead of Wolf 😢

I finally managed to toggle WW status from off to auto with mosquitto:

mosquitto_pub -h 192.168.0.12 -t Wolf/192.168.0.156/WWSystem_BM-2_0x35/set/Programmwahl/350012/value -m 1

and

mosquitto_pub -h 192.168.0.12 -t Wolf/192.168.0.156/WWSystem_BM-2_0x35/set/Programmwahl/350012/value -m 0