gpmc.h

/**
 *  \file   gpmc.h
 *
 *  \brief  Definitions used for GPMC
 *
 *   This file contains the driver API prototypes and macro definitions.
 */

/*
* Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/
*/
/*
*  Redistribution and use in source and binary forms, with or without
*  modification, are permitted provided that the following conditions
*  are met:
*
*    Redistributions of source code must retain the above copyright
*    notice, this list of conditions and the following disclaimer.
*
*    Redistributions in binary form must reproduce the above copyright
*    notice, this list of conditions and the following disclaimer in the
*    documentation and/or other materials provided with the
*    distribution.
*
*    Neither the name of Texas Instruments Incorporated nor the names of
*    its contributors may be used to endorse or promote products derived
*    from this software without specific prior written permission.
*
*  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
*  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
*  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
*  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
*  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
*  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
*  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
*  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
*  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
*  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
*  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
*/



#ifndef __GPMC_H_
#define __GPMC_H__

#include "hw_gpmc.h"
#ifdef __cplusplus
extern "C" {
#endif

/*******************************************************************************
*                           MACRO DEFINITIONS
*******************************************************************************/

/*****************************************************************************/
/*
** Macros which can be used as 'mode' parameter to GPMCIdleModeSelect API.
** 
*/
#define GPMC_IDLEMODE_FORCEIDLE                       (0)
#define GPMC_IDLEMODE_NOIDLE                          (1)
#define GPMC_IDLEMODE_SMARTIDLE                       (2)

/*****************************************************************************/
/*
** Macros which can be used as 'configVal' parameter to GPMCAutoIdleConfig API.
** 
*/
#define GPMC_AUTOIDLE_FREERUN                         (0)
#define GPMC_AUTOIDLE_AUTORUN                         (1)

/*****************************************************************************/
/*
** Macros which can be used as 'flag' parameter to GPMCIntStatusGet,
** GPMCIntStatusClear APIs.
**
*/
#define GPMC_FIFOEVENT_STATUS                         (0)
#define GPMC_TERMINALCOUNT_STATUS                     (1)
#define GPMC_WAIT0EDGEDETECTION_STATUS                (2)
#define GPMC_WAIT1EDGEDETECTION_STATUS                (3)

/*****************************************************************************/
/*
** Macros which can be used as 'flag' parameter to GPMCIntEnable, GPMCIntDisable
** APIs.
**
*/
#define GPMC_FIFOEVENT_INT                            (0)
#define GPMC_TERMINALCOUNT_INT                        (1)
#define GPMC_WAIT0EDGEDETECTION_INT                   (2)
#define GPMC_WAIT1EDGEDETECTION_INT                   (3)

/*****************************************************************************/
/*
** Macros which can be used as 'flag' parameter to GPMCTimeOutFeatureConfig API.
**
*/
#define GPMC_TIMEOUTFEATURE_ENABLE                    (1)
#define GPMC_TIMEOUTFEATURE_DISABLE                   (0)

/*****************************************************************************/
/*
** Macros which can be used as 'err' parameter to GPMCErrStatusGet API.
**
*/
#define GPMC_TIMEOUT_ERROR                            (0)
#define GPMC_NOTSUPPMCMD_ERROR                        (1)
#define GPMC_NOTSUPPADD_ERROR                         (2)

/*****************************************************************************/
/*
** Macros which can be used as 'pin' parameter to GPMCWaitPinPolaritySelect,
** GPMCWaitPinStatusGet APIs.
**
*/
#define GPMC_WAIT_PIN0                                (0)
#define GPMC_WAIT_PIN1                                (1)

/*****************************************************************************/
/*
** Macros which can be used as 'polarity' parameter to GPMCWaitPinPolaritySelect
** API.
**
*/
#define GPMC_WAIT_PIN_POLARITY_LOW                    (0)
#define GPMC_WAIT_PIN_POLARITY_HIGH                   (1)

/*****************************************************************************/
/*
** Macros which can be used as 'pinLevel' parameter to
** GPMCWriteProtectPinLevelCntrl API.
*/
#define GPMC_WP_PIN_LEVEL_LOW                         (0)
#define GPMC_WP_PIN_LEVEL_HIGH                        (1)

/*****************************************************************************/
/*
** Macros which can be used as 'flag' parameter to
** GPMCNANDForcePostedWriteFeatureConfig API.
*/
#define GPMC_FORCEPOSTEDWRITE_ENABLE                  (1)
#define GPMC_FORCEPOSTEDWRITE_DISABLE                 (0)

/*****************************************************************************/
/*
** Macros which can be used as 'flag' parameter to
** GPMCLimitedAddrDevSupportConfig API.
*/
#define GPMC_LIMITEDADDRESS_SUPPORT_ENABLE            (1)
#define GPMC_LIMITEDADDRESS_SUPPORT_DISABLE           (0)

/*****************************************************************************/
/*
** Macros which can be used as 'csNum' parameter to GPMCFclkDividerSelect,
** GPMCTimeParaGranularitySelect, GPMCAddrDataMuxProtocolSelect,
** GPMCDevTypeSelect, GPMCDevSizeSelect, GPMCWaitPinSelect,
** GPMCWaitMonitoringTimeSelect, GPMCWaitPinMonitoringConfig,
** GPMCClkActivationTimeConfig, GPMCDevPageLenSet, GPMCWriteTypeSelect,
** GPMCReadTypeSelect, GPMCAccessTypeSelect, GPMCSyncWrapBurstConfig,
** GPMCCSTimingConfig, GPMCADVTimingConfig, GPMCWEAndOETimingConfig,
** GPMCRdAccessAndCycleTimeTimingConfig, GPMCCSConfig, GPMCBaseAddrSet,
** GPMCWrAccessAndWrDataOnADMUXBusTimingConfig, GPMCMaskAddrSet,
** GPMCycle2CycleAndTurnArndTimeTimingConfig, GPMCSNANDCmdWrite,
** GPMCNANDAddrWrite, GPMCNANDDataWrite, GPMCNANDDataRead, GPMCPrefetchCSSelect,
** GPMCECCCSSelect, GPMCECCBCHResultGet APIs.
** 
*/
#define GPMC_CHIP_SELECT_0                            (0)
#define GPMC_CHIP_SELECT_1                            (1)
#define GPMC_CHIP_SELECT_2                            (2)
#define GPMC_CHIP_SELECT_3                            (3)
#define GPMC_CHIP_SELECT_4                            (4)
#define GPMC_CHIP_SELECT_5                            (5)
#define GPMC_CHIP_SELECT_6                            (6)
#define GPMC_CHIP_SELECT_7                            (7)

/*****************************************************************************/
/*
** Macros which can be used as 'divideVal' parameter to GPMCFclkDividerSelect 
** API.
** 
*/
#define GPMC_FCLK_DIV_BY_1                            (0)
#define GPMC_FCLK_DIV_BY_2                            (1)
#define GPMC_FCLK_DIV_BY_3                            (2)
#define GPMC_FCLK_DIV_BY_4                            (3)

/*****************************************************************************/
/*
** Macros which can be used as 'scaleftr' parameter to
** GPMCTimeparaGranularitySelect API. 
**
*/
#define GPMC_TIMEPARAGRANULARITY_X1                   (0)
#define GPMC_TIMEPARAGRANULARITY_X2                   (1)

/*****************************************************************************/
/*
** Macros which can be used as 'protocol' parameter to 
** GPMCAddrDataMuxProtocolSelect API. 
**
*/
#define GPMC_MUXADDDATA_NOMUX                         (0)
#define GPMC_MUXADDDATA_AADMUX                        (1)
#define GPMC_MUXADDDATA_ADMUX                         (2)

/*****************************************************************************/
/*
** Macros which can be used as 'devType' parameter to GPMCDevTypeSelect API.
**
*/
#define GPMC_DEVICETYPE_NORLIKE                       (0)
#define GPMC_DEVICETYPE_NANDLIKE                      (2)

/*****************************************************************************/
/*
** Macros which can be used as 'devSize' parameter to GPMCDevSizeSelect API.
**
*/
#define GPMC_DEVICESIZE_8BITS                         (0)
#define GPMC_DEVICESIZE_16BITS                        (1)

/*****************************************************************************/
/*
** Macros which can be used as 'flag' parameter to GPMCWaitMonitoringTimeSelect
** API.
**
*/
#define GPMC_WAITMONITORINGTIME_WITH_VALIDDATA        (0)
#define GPMC_WAITMONITORINGTIME_ONECLKB4_VALIDDATA    (1)
#define GPMC_WAITMONITORINGTIME_TWOCLKB4_VALIDDATA    (2)

/*****************************************************************************/
/*
** Macros which can be used as 'mode' parameter to GPMCWaitPinMonitoringConfig 
** API.
**
*/
#define GPMC_MODE_READ                                (0)
#define GPMC_MODE_WRITE                               (1)

/*****************************************************************************/
/*
** Macros which can be used as 'flag' parameter to GPMCWaitMonitoringTimeConfig
** API.
**
*/
#define GPMC_WAITMONITORING_ENABLE                    (1)
#define GPMC_WAITMONITORING_DISABLE                   (0)

/*****************************************************************************/
/*
** Macros which can be used as 'flag' parameter to GPMCClkActivationTimeConfig
** API.
**
*/
#define GPMC_CLKACTIVATIONTIME_ATSTART                (0)
#define GPMC_CLKACTIVATIONTIME_ONECLK_AFTR            (1)
#define GPMC_CLKACTIVATIONTIME_TWOCLK_AFTR            (2)

/*****************************************************************************/
/*
** Macros which can be used as 'pageLen' parameter to GPMCDevPageLenSet API.
**
*/
#define GPMC_DEV_PAGELENGTH_FOUR                      (0)
#define GPMC_DEV_PAGELENGTH_EIGHT                     (1)
#define GPMC_DEV_PAGELENGTH_SIXTEEN                   (2)

/*****************************************************************************/
/*
** Macros which can be used as 'writeType' parameter to GPMCWriteTypeSelect API.
**
*/
#define GPMC_WRITETYPE_ASYNC                          (0)
#define GPMC_WRITETYPE_SYNC                           (1)

/*****************************************************************************/
/*
** Macros which can be used as 'readType' parameter to GPMCReadTypeSelect API.
**
*/
#define GPMC_READTYPE_ASYNC                           (0)
#define GPMC_READTYPE_SYNC                            (1)

/*****************************************************************************/
/*
** Macros which can be used as 'AccessType' parameter to GPMCAccessTypeSelect
** API.
**
*/
#define GPMC_ACCESSTYPE_SINGLE                        (0)
#define GPMC_ACCESSTYPE_MULTIPLE                      (1)

/*****************************************************************************/
/*
** Macros which can be used as 'flag' parameter to GPMCSyncWrapBurstConfig API.
**
*/
#define GPMC_WRAPBURST_ENABLE                         (1)
#define GPMC_WRAPBURST_DISABLE                        (0)

/*****************************************************************************/
/*
** Macros which can be used as 'CSExtDelayFlag' parameter to 
** GPMC_CS_TIMING_CONFIG macro
*/
#define GPMC_CS_EXTRA_DELAY                           (1)
#define GPMC_CS_EXTRA_NODELAY                         (0)

/*
* \brief  This macro used to make the conf value which is used to configure the
*         CS signal timing configuration.\n 
*
* \param  CSWrOffTime    CS# de-assertion time from start cycle time for write 
*                        accesses in GPMC_FCLK cycles.
*
*         CSRdOffTime    CS# de-assertion time from start cycle time for read 
*                        accesses in GPMC_FCLK cycles
*
*         CSExtDelayFlag Flag to indicate whether to add half GPMC_FCLK delay to
*                        CS or not.
*                        This can take one of the following values :
*                        GPMC_CS_EXTRA_DELAY --   CS# Timing control  
*                                                 signal is delayed of          
*                                                 half GPMC_FCLK cycle.
*                        GPMC_CS_EXTRA_NODELAY -- CS# Timing control  
*                                                 signal is not delayed
*
*         CSOnTime       CS# assertion time from start cycle time in GPMC_FCLK
*                        cycles.
*/

#define GPMC_CS_TIMING_CONFIG(CSWrOffTime, CSRdOffTime, CSExtDelayFlag, CSOnTime )   ((unsigned int) \
                                                                    ((CSWrOffTime << GPMC_CONFIG2_0_CSWROFFTIME_SHIFT) & GPMC_CONFIG2_0_CSWROFFTIME) | \
                                                                    ((CSRdOffTime << GPMC_CONFIG2_0_CSRDOFFTIME_SHIFT) & GPMC_CONFIG2_0_CSRDOFFTIME) | \
                                                                    ((CSExtDelayFlag << GPMC_CONFIG2_0_CSEXTRADELAY_SHIFT) & GPMC_CONFIG2_0_CSEXTRADELAY) | \
                                                                    ((CSOnTime << GPMC_CONFIG2_0_CSONTIME_SHIFT) & GPMC_CONFIG2_0_CSONTIME))


/*****************************************************************************/
/*
** Macros which can be used as 'ADVExtDelayFlag' parameter to
** GPMC_ADV_TIMING_CONFIG macro
*/
#define GPMC_ADV_EXTRA_DELAY                          (1)
#define GPMC_ADV_EXTRA_NODELAY                        (0)

/*
* \brief  This macro used to make the conf value which is used to configure the
*         ADV# signal timing configuration.\n 
*
* \param  ADVAADMuxWrOffTime    ADV# de-assertion time in GPMC_FCLK cycles for 
*                               first address phase when using the AAD-Mux
*                               prorocol.
*
*         ADVAADMuxRdOffTime    ADV# de-assertion time in GPMC_FCLK cycles for 
*                               first address phase when using the AAD-Mux
*                               prorocol.
*
*         ADVWrOffTime          ADV# de-assertion time in GPMC_FCLK cycles from 
*                               start cycle time for write accesses
*
*         ADVRdOffTime          ADV# de-assertion time in GPMC_FCLK cycles from 
*                               start cycle time for write accesses
*
*         ADVExtDelayFlag       Flag to indicate whether to add half GPMC_FCLK 
*                               delay to ADV or not.
*                               This can take one of the following values :
*                               GPMC_ADV_EXTRA_DELAY --   ADV# Timing control  
*                                                         signal is delayed of  
*                                                         half GPMC_FCLK cycle.
*                               GPMC_ADV_EXTRA_NODELAY -- ADV# Timing control  
*                                                         signal is not delayed.
*
*         ADVAADMuxOnTime       ADV# assertion time in GPMC_FCLK cycles for 
*                               first address phase when using the 
*                               AAD-Multiplexed protocol.   
*
*         ADVOnTime             ADV# assertion time from start cycle time in 
*                               GPMC_FCLK cycles.
*/

#define GPMC_ADV_TIMING_CONFIG(ADVAADMuxWrOffTime, ADVAADMuxRdOffTime, ADVWrOffTime, ADVRdOffTime, ADVExtDelayFlag, ADVAADMuxOnTime, ADVOnTime)   ((unsigned int) \
                                                  ((ADVAADMuxWrOffTime << GPMC_CONFIG3_0_ADVAADMUXWROFFTIME_SHIFT) & GPMC_CONFIG3_0_ADVAADMUXWROFFTIME) | \
                                                  ((ADVAADMuxRdOffTime << GPMC_CONFIG3_0_ADVAADMUXRDOFFTIME_SHIFT) & GPMC_CONFIG3_0_ADVAADMUXRDOFFTIME) | \
                                                  ((ADVWrOffTime << GPMC_CONFIG3_0_ADVWROFFTIME_SHIFT) & GPMC_CONFIG3_0_ADVWROFFTIME) | \
                                                  ((ADVRdOffTime << GPMC_CONFIG3_0_ADVRDOFFTIME_SHIFT) & GPMC_CONFIG3_0_ADVRDOFFTIME) | \
                                                  ((ADVExtDelayFlag << GPMC_CONFIG3_0_ADVEXTRADELAY_SHIFT) & GPMC_CONFIG3_0_ADVEXTRADELAY) | \
                                                  ((ADVAADMuxOnTime << GPMC_CONFIG3_0_ADVAADMUXONTIME_SHIFT) & GPMC_CONFIG3_0_ADVAADMUXONTIME) | \
                                                  ((ADVOnTime << GPMC_CONFIG3_0_ADVONTIME_SHIFT) & GPMC_CONFIG3_0_ADVONTIME))

/*****************************************************************************/
/*
** Macros which can be used as 'OEExtDelayFlag' parameter to
** GPMC_WE_OE_TIMING_CONFIG macro
*/
#define GPMC_OE_EXTRA_DELAY                           (1)
#define GPMC_OE_EXTRA_NODELAY                         (0)

/*****************************************************************************/
/*
** Macros which can be used as 'WEExtDelayFlag' parameter to
** GPMC_WE_OE_TIMING_CONFIG macro
*/
#define GPMC_WE_EXTRA_DELAY                           (1)
#define GPMC_WE_EXTRA_NODELAY                         (0)


/*
* \brief  This macro used to make the conf value which is used to configure the
*         WE# and OE# signal timing configuration.\n 
*
* \param  WEOffTime             WE# de-assertion time in GPMC_FCLK cycles from 
*                               start cycle time.
*
*         WEExtDelayFlag        Flag to indicate whether to add half GPMC_FCLK 
*                               delay to WE or not.
*                               This can take one of the following values :
*                               GPMC_WE_EXTRA_DELAY --   WE# Timing control  
*                                                        signal is delayed of   
*                                                        half GPMC_FCLK cycle.
*                               GPMC_WE_EXTRA_NODELAY -- WE# Timing control  
*                                                        signal is not delayed
*         WEOnTime              WE# assertion time in GPMC_FCLK cycles from 
*                               start cycle time.
*
*         OEAADMuxOffTime       OE# de-assertion time in GPMC_FCLK cycles for 
*                               first address phase when using the AAD-Mux
*                               prorocol.
*
*         OEOffTime             OE# de-assertion time in GPMC_FCLK cycles from 
*                               start cycle time.
*
*         OEExtDelayFlag        Flag to indicate whether to add half GPMC_FCLK 
*                               delay to OE or not.
*                               This can take one of the following values :
*                               GPMC_OE_EXTRA_DELAY --   OE# Timing control  
*                                                        signal is delayed of   
*                                                        half GPMC_FCLK cycle.
*                               GPMC_OE_EXTRA_NODELAY -- OE# Timing control  
*                                                        signal is not delayed
*
*         OEAADMuxOnTime        OE# assertion time in GPMC_FCLK cycles for 
*                               first address phase when using the AAD-Mux
*                               prorocol.
*
*         OEOnTime              OE# assertion time in GPMC_FCLK cycles from 
*                               start cycle time.
*
*/

#define GPMC_WE_OE_TIMING_CONFIG(WEOffTime, WEExtDelayFlag, WEOnTime, OEAADMuxOffTime, OEOffTime, OEExtDelayFlag, OEAADMuxOnTime,OEOnTime )   ((unsigned int) \
                                                             ((WEOffTime << GPMC_CONFIG4_0_WEOFFTIME_SHIFT) & GPMC_CONFIG4_0_WEOFFTIME) | \
                                                             ((WEExtDelayFlag << GPMC_CONFIG4_0_WEEXTRADELAY_SHIFT) & GPMC_CONFIG4_0_WEEXTRADELAY) | \
                                                             ((WEOnTime << GPMC_CONFIG4_0_WEONTIME_SHIFT) & GPMC_CONFIG4_0_WEONTIME) | \
                                                             ((OEAADMuxOffTime << GPMC_CONFIG4_0_OEAADMUXOFFTIME_SHIFT) & GPMC_CONFIG4_0_OEAADMUXOFFTIME) | \
                                                             ((OEOffTime << GPMC_CONFIG4_0_OEOFFTIME_SHIFT) & GPMC_CONFIG4_0_OEOFFTIME) | \
                                                             ((OEExtDelayFlag << GPMC_CONFIG4_0_WEEXTRADELAY_SHIFT) & GPMC_CONFIG4_0_WEEXTRADELAY) | \
                                                             ((OEAADMuxOnTime << GPMC_CONFIG4_0_OEAADMUXONTIME_SHIFT) & GPMC_CONFIG4_0_OEAADMUXONTIME) | \
                                                             ((OEOnTime << GPMC_CONFIG4_0_OEONTIME_SHIFT) & GPMC_CONFIG4_0_OEONTIME))

/*
* \brief  This macro used to make the conf value which is used to configure the
*         read access and cycle time timing configuration.\n 
*
* \param  rdCycleTime           Total read cycle time in GPMC_FCLK cycles.
*
*         wrCycleTime           Total write cycle time in GPMC_FCLK cycles.
*
*         rdAccessTime          Read access time (Delay between start cycle time
*                               and first data valid) in GPMC_FCLK cycles.
*
*         pageBurstAccessTime   Page burest access time (Delay between 
*                               successive words in a multiple access)in 
*                               GPMC_FCLK cycles.
*
*/

#define GPMC_RDACCESS_CYCLETIME_TIMING_CONFIG(rdCycleTime, wrCycleTime, rdAccessTime, pageBurstAccessTime )   ((unsigned int) \
                                                    ((rdCycleTime << GPMC_CONFIG5_0_RDCYCLETIME_SHIFT) & GPMC_CONFIG5_0_RDCYCLETIME) | \
                                                    ((wrCycleTime << GPMC_CONFIG5_0_WRCYCLETIME_SHIFT) & GPMC_CONFIG5_0_WRCYCLETIME) | \
                                                    ((rdAccessTime << GPMC_CONFIG5_0_RDACCESSTIME_SHIFT) & GPMC_CONFIG5_0_RDACCESSTIME) | \
                                                    ((pageBurstAccessTime << GPMC_CONFIG5_0_PAGEBURSTACCESSTIME_SHIFT) & GPMC_CONFIG5_0_PAGEBURSTACCESSTIME))

/*****************************************************************************/
/*
** Macros which can be used as 'cycle2CycleDelaySameCSCfg' parameter to
** GPMC_CYCLE2CYCLE_BUSTURNAROUND_TIMING_CONFIG macro
*/
#define GPMC_CYCLE2CYCLESAMECSEN_C2CDELAY             (1)
#define GPMC_CYCLE2CYCLESAMECSEN_NOC2CDELAY           (0)

/*****************************************************************************/
/*
** Macros which can be used as 'cycle2CycleDelayDiffCSCfg' parameter to
** GPMC_CYCLE2CYCLE_BUSTURNAROUND_TIMING_CONFIG macro
*/
#define GPMC_CYCLE2CYCLEDIFFCSEN_C2CDELAY             (1)
#define GPMC_CYCLE2CYCLEDIFFCSEN_NOC2CDELAY           (0)

/*
* \brief  This macro used to make the conf value which is used to configure the
*         cycle to cycle and bus turn around time timing configuration.\n 
*
* \param  cycle2CycleDelay       Cycle to cycle delay (Chip select high pulse 
*                                delay between two successive accesses)in 
*                                GPMC_FCLK cycles.
*
*      cycle2CycleDelaySameCSCfg Specified whether to add the cycle to cycle
*                                delay between two successive accesses or not
*                                (to the same chip-select).
*                                This can take one of the following values :
*                                GPMC_CYCLE2CYCLESAMECSEN_C2CDELAY   -- To add 
*                                                                     the delay.
*                                GPMC_CYCLE2CYCLESAMECSEN_NOC2CDELAY -- Don't 
*                                                                 add the delay.
*
*      cycle2CycleDelayDiffCSCfg Specified whether to add the cycle to cycle
*                                delay between two successive accesses or not
*                                (to the diffrent chip-select).
*                                This can take one of the following values :
*                                GPMC_CYCLE2CYCLEDIFFCSEN_C2CDELAY   -- To add 
*                                                                     the delay.
*                                GPMC_CYCLE2CYCLEDIFFCSEN_NOC2CDELAY -- Don't 
*                                                                 add the delay.
*
*         busTAtime             Bus turn aroung time between two successive 
*                               accesses to the same chip-select (read to write)
*                               or to a diff chip-select in GPMC_FCLK cycles.
*
*
*/

#define GPMC_CYCLE2CYCLE_BUSTURNAROUND_TIMING_CONFIG(cycle2CycleDelay, cycle2CycleDelaySameCSCfg, cycle2CycleDelayDiffCSCfg, busTAtime )   ((unsigned int) \
                                          ((cycle2CycleDelay << GPMC_CONFIG6_0_CYCLE2CYCLEDELAY_SHIFT) & GPMC_CONFIG6_0_CYCLE2CYCLEDELAY) | \
                                          ((cycle2CycleDelaySameCSCfg << GPMC_CONFIG6_0_CYCLE2CYCLESAMECSEN_SHIFT) & GPMC_CONFIG6_0_CYCLE2CYCLESAMECSEN) | \
                                          ((cycle2CycleDelayDiffCSCfg << GPMC_CONFIG6_0_CYCLE2CYCLEDIFFCSEN_SHIFT) & GPMC_CONFIG6_0_CYCLE2CYCLEDIFFCSEN) | \
                                          ((busTAtime << GPMC_CONFIG6_0_BUSTURNAROUND_SHIFT) & GPMC_CONFIG6_0_BUSTURNAROUND))


/*****************************************************************************/
/*
** Macros which can be used as 'conf' parameter to GPMCCSConfig API.
**
*/
#define GPMC_CS_ENABLE                                (1)
#define GPMC_CS_DISABLE                               (0)

/*****************************************************************************/
/*
** Macros which can be used as 'addrMask' parameter to GPMCSMaskAddrSet API.
**
*/
#define GPMC_CS_SIZE_256MB                            (0x00)
#define GPMC_CS_SIZE_128MB                            (0x08)
#define GPMC_CS_SIZE_64MB                             (0x0c)
#define GPMC_CS_SIZE_32MB                             (0x0e)
#define GPMC_CS_SIZE_16MB                             (0x0f)

/*****************************************************************************/
/*
** Macros which can be used as 'accessMode' parameter to
** GPMCPREFETCHAccessModeSelect API.
*/
#define GPMC_PREFETCH_ACCESSMODE_READ                 (0)
#define GPMC_PREFETCH_ACCESSMODE_WRITE                (1)

/*****************************************************************************/
/*
** Macros which can be used as 'syncType' parameter to
** GPMCPREFETCHSyncTypeSelect API.
**
*/
#define GPMC_PREFETCH_SYNCTYPE_DMA                    (1)
#define GPMC_PREFETCH_SYNCTYPE_INT                    (0)

/*****************************************************************************/
/*
** Macros which can be used as 'flag' parameter to GPMCPrefetchSyncModeConfig
** API.
**
*/
#define GPMC_PREFETCH_ACCESSCS_AT_START               (0)
#define GPMC_PREFETCH_ACCESSCS_AT_STARTANDWAIT        (1)

/*****************************************************************************/
/*
** Macros which can be used as 'waitPin' parameter to GPMCPrefetchWaitPinSelect
** API.
**
*/
#define GPMC_PREFETCH_WAITPINSELECTOR_W0              (0)
#define GPMC_PREFETCH_WAITPINSELECTOR_W1              (1)

/*****************************************************************************/
/*
** Macros which can be used as 'configVal' GPMCPrefetchAccessCycleOptConfig API.
** 
*/
#define GPMC_PREFETCH_OPTIMIZED_ACCESS_ENABLE         (1)
#define GPMC_PREFETCH_OPTIMIZED_ACCESS_DISABLE        (0)

/*****************************************************************************/
/*
** Macros which can be used as 'configVal' parameter to
** GPMCPrefetchRRArbitrationConfig API.
*/
#define GPMC_PREFETCH_RR_ARBITRATION_ENABLE           (1)
#define GPMC_PREFETCH_RR_ARBITRATION_DISABLE          (0)

/*****************************************************************************/
/*
** Macros which can be used as 'algo' parameter to GPMCECCAlgoSelect API.
** 
*/
#define GPMC_ECC_ALGORITHM_HAMMINGCODE                (0)
#define GPMC_ECC_ALGORITHM_BCH                        (1)

/*****************************************************************************/
/*
** Macros which can be used as 'errCorrCapVal' parameter to
** GPMCECCBCHErrCorrectionCapSelect API.
**
*/
#define GPMC_ECC_BCH_ERRCORRCAP_UPTO_4BITS            (0)
#define GPMC_ECC_BCH_ERRCORRCAP_UPTO_8BITS            (1)
#define GPMC_ECC_BCH_ERRCORRCAP_UPTO_16BITS           (2)

/*****************************************************************************/
/*
** Macros which can be used as 'eccColVal' parameter to GPMCECCColumnSelect API.
**
*/
#define GPMC_ECC_COLUMNS_8                            (0)
#define GPMC_ECC_COLUMNS_16                           (1)

/*****************************************************************************/
/*
** Macros which can be used as 'numOfSects' parameter to
** GPMCECCBCHNumOfSectorsSelect API.
** Here 1 SECTOR = 512 bytes.
**
*/
#define GPMC_ECC_BCH_NUMOFSECTS_1                     (0)
#define GPMC_ECC_BCH_NUMOFSECTS_2                     (1)
#define GPMC_ECC_BCH_NUMOFSECTS_3                     (2)
#define GPMC_ECC_BCH_NUMOFSECTS_4                     (3)
#define GPMC_ECC_BCH_NUMOFSECTS_5                     (4)
#define GPMC_ECC_BCH_NUMOFSECTS_6                     (5)
#define GPMC_ECC_BCH_NUMOFSECTS_7                     (6)
#define GPMC_ECC_BCH_NUMOFSECTS_8                     (7)

/*****************************************************************************/
/*
** Macros which can be used as 'eccResReg' parameter to GPMCECCResultRegSelect
** API.
**
*/
#define GPMC_ECCPOINTER_RESULT_1                      (1)
#define GPMC_ECCPOINTER_RESULT_2                      (2)
#define GPMC_ECCPOINTER_RESULT_3                      (3)
#define GPMC_ECCPOINTER_RESULT_4                      (4)
#define GPMC_ECCPOINTER_RESULT_5                      (5)
#define GPMC_ECCPOINTER_RESULT_6                      (6)
#define GPMC_ECCPOINTER_RESULT_7                      (7)
#define GPMC_ECCPOINTER_RESULT_8                      (8)
#define GPMC_ECCPOINTER_RESULT_9                      (9)

/*****************************************************************************/
/*
** Macros which can be used as 'eccSize' parameter to GPMCECCSizeValSet API.
**
*/
#define GPMC_ECC_SIZE_0                               (0)
#define GPMC_ECC_SIZE_1                               (1)

/*****************************************************************************/
/*
** Macros which can be used as 'eccResReg' parameter to GPMCECCResultSizeSelect
** API.
**
*/
#define GPMC_ECC_RESULT_1                             (1)
#define GPMC_ECC_RESULT_2                             (2)
#define GPMC_ECC_RESULT_3                             (3)
#define GPMC_ECC_RESULT_4                             (4)
#define GPMC_ECC_RESULT_5                             (5)
#define GPMC_ECC_RESULT_6                             (6)
#define GPMC_ECC_RESULT_7                             (7)
#define GPMC_ECC_RESULT_8                             (8)
#define GPMC_ECC_RESULT_9                             (9)

/*****************************************************************************/
/*
** Macros which can be used as 'resIndex' parameter to GPMCECCBCHResultGet API.
**
*/
#define GPMC_BCH_RESULT_0                             (0)
#define GPMC_BCH_RESULT_1                             (1)
#define GPMC_BCH_RESULT_2                             (2)
#define GPMC_BCH_RESULT_3                             (3)
#define GPMC_BCH_RESULT_4                             (4)
#define GPMC_BCH_RESULT_5                             (5)
#define GPMC_BCH_RESULT_6                             (6)

/***************************************************************************/
/*
** Function Prototypes
*/
extern void GPMCECCEnable(unsigned int baseAddr);
extern void GPMCECCDisable(unsigned int baseAddr);
extern void  GPMCModuleSoftReset(unsigned int baseAddr);
extern void GPMCECCResultRegClear(unsigned int baseAddr);
extern void GPMCPrefetchEngineStop(unsigned int baseAddr);
extern void GPMCPrefetchEngineStart(unsigned int baseAddr);
extern unsigned int  GPMCErrAddrGet(unsigned int baseAddr);
extern void GPMCPrefetchEngineEnable(unsigned int baseAddr);
extern unsigned int  GPMCRevisionGet(unsigned int baseAddr);
extern void GPMCPrefetchEngineDisable(unsigned int baseAddr);
extern unsigned int  GPMCErrSysCmdGet(unsigned int baseAddr);
extern unsigned int GPMCECCBCHSWDataRead(unsigned int baseAddr);
extern unsigned int  GPMCErrValStatusGet(unsigned int baseAddr);
extern unsigned int  GPMCPREFETCHCountValGet(unsigned int baseAddr);
extern void  GPMCIntEnable(unsigned int baseAddr, unsigned int flag);
extern unsigned int  GPMCModuleResetStatusGet(unsigned int baseAddr);
extern unsigned int GPMCPrefetchFIFOPtrValGet(unsigned int baseAddr);
extern void  GPMCIntDisable(unsigned int baseAddr, unsigned int flag);
extern void GPMCECCCSSelect(unsigned int baseAddr, unsigned int csNum);
extern unsigned int  GPMCPrefetchEngineStatusGet(unsigned int baseAddr);
extern void GPMCECCAlgoSelect(unsigned int baseAddr, unsigned int algo);
extern void  GPMCIntStatusClear(unsigned int baseAddr, unsigned int flag);
extern void  GPMCIdleModeSelect(unsigned int baseAddr, unsigned int mode);
extern unsigned int  GPMCPrefetchFIFOThrldStatusGet(unsigned int baseAddr);
extern void GPMCPrefetchCSSelect(unsigned int baseAddr, unsigned int csNum);
extern void GPMCECCBCHSWDataWrite(unsigned int baseAddr,unsigned int bchData);
extern unsigned int  GPMCErrStatusGet(unsigned int baseAddr, unsigned int err);
extern void  GPMCAutoIdleConfig(unsigned int baseAddr, unsigned int configVal);
extern void GPMCECCColumnSelect(unsigned int baseAddr, unsigned int eccColVal);
extern unsigned int  GPMCIntStatusGet(unsigned int baseAddr, unsigned int flag);
extern void  GPMCTimeOutFeatureConfig(unsigned int baseAddr, unsigned int flag);
extern void GPMCPrefetchSyncModeConfig(unsigned int baseAddr,unsigned int flag);
extern void GPMCECCResultRegSelect(unsigned int baseAddr,
                                   unsigned int eccResReg);
extern unsigned int  GPMCSNANDDataRead(unsigned int baseAddr,
                                       unsigned int csNum);
extern unsigned int GPMCECCResultGet(unsigned int baseAddr,
                                     unsigned int eccResReg);
extern void GPMCPrefetchWaitPinSelect(unsigned int baseAddr,
                                      unsigned int waitPin);
extern unsigned int  GPMCWaitPinStatusGet(unsigned int baseAddr,
                                          unsigned int pin);
extern void GPMCPrefetchSyncTypeSelect(unsigned int baseAddr,
                                       unsigned int syncType);
extern void  GPMCTimeOutStartValSet(unsigned int baseAddr,
                                    unsigned int timeoutVal);
extern void GPMCPrefetchCycleOptValSet(unsigned int baseAddr,
                                       unsigned int cleOptVal);
extern void GPMCECCBCHWrapModeValSet(unsigned int baseAddr,
                                     unsigned int wrapModeVal);
extern void GPMCPrefetchTrnsCntValSet(unsigned int baseAddr,
                                      unsigned int trnsCntVal);
extern void GPMCPrefetchWeightedPrioSet(unsigned int baseAddr,
                                        unsigned int accessVal);
extern void  GPMCLimitedAddrDevSupportConfig(unsigned int baseAddr,
                                             unsigned int flag);
extern void GPMCPrefetchAccessCycleOptConfig(unsigned int baseAddr,
                                             unsigned int configVal);
extern void GPMCECCBCHNumOfSectorsSelect(unsigned int baseAddr,
                                         unsigned int numOfSects);
extern void GPMCPrefetchAccessModeSelect(unsigned int baseAddr,
                                         unsigned int accessMode);
extern void GPMCPrefetchFifoThrldValSet(unsigned int baseAddr,
                                        unsigned int fifoThrsld);
extern void GPMCECCBCHErrCorrectionCapSelect(unsigned int baseAddr,
                                             unsigned int errCorrCapVal);
extern void  GPMCWriteProtectPinLevelCtrl(unsigned int baseAddr,
                                          unsigned int pinLevel);
extern unsigned int  GPMCEmptyWriteBuffStatusGet(unsigned int baseAddr);
extern void  GPMCNANDForcePostedWriteFeatureConfig(unsigned int baseAddr,
                                                   unsigned int flag);
extern void GPMCECCSizeValSet(unsigned int baseAddr,unsigned int eccSize,
                              unsigned int eccSizeVal);
extern void  GPMCCSConfig(unsigned int baseAddr, unsigned int csNum,
                          unsigned int conf);
extern void  GPMCBaseAddrSet(unsigned int baseAddr, unsigned int csNum,
                             unsigned int addr);
extern void  GPMCMaskAddrSet(unsigned int baseAddr, unsigned int csNum,
                             unsigned int maskaddr);
extern void  GPMNANDCmdWrite(unsigned int baseAddr, unsigned int csNum,
                             unsigned int cmd);
extern void  GPMCDevTypeSelect(unsigned int baseAddr, unsigned int csNum,
                               unsigned int devType);
extern void  GPMCDevSizeSelect(unsigned int baseAddr, unsigned int csNum,
                               unsigned int devSize);
extern void  GPMCWaitPinSelect(unsigned int baseAddr, unsigned int csNum,
                               unsigned int waitPin);
extern void  GPMCCSTimingConfig(unsigned int baseAddr, unsigned int csNum,
                                unsigned int conf);
extern void  GPMCNANDAddrWrite(unsigned int baseAddr, unsigned int csNum,
                               unsigned int addr);
extern void  GPMCNANDDataWrite(unsigned int baseAddr, unsigned int csNum,
                               unsigned int data);
extern void  GPMCReadTypeSelect(unsigned int baseAddr, unsigned int csNum,
                                unsigned int readType);
extern void  GPMCADVTimingConfig(unsigned int baseAddr, unsigned int csNum,
                                 unsigned int conf);
extern void  GPMCWriteTypeSelect(unsigned int baseAddr, unsigned int csNum,
                                 unsigned int writeType);
extern void  GPMCDevPageLenSet(unsigned int baseAddr, unsigned int csNum,
                               unsigned int pageLen);
extern void  GPMCFclkDividerSelect(unsigned int baseAddr, unsigned int csNum,
                                   unsigned int divideVal);
extern void  GPMCWaitPinPolaritySelect(unsigned int baseAddr, unsigned int pin,
                                       unsigned int polarity);
extern void GPMCECCResultSizeSelect(unsigned int baseAddr,unsigned int eccResReg,
                                    unsigned int eccSize);
extern void  GPMCWEAndOETimingConfig(unsigned int baseAddr, unsigned int csNum,
                                     unsigned int conf);
extern void  GPMCSyncWrapBurstConfig(unsigned int baseAddr, unsigned int csNum,
                                     unsigned int flag);
extern unsigned int GPMCECCBCHResultGet(unsigned int baseAddr,
                                        unsigned int resIndex,
                                        unsigned int csNum);
extern void  GPMCClkActivationTimeConfig(unsigned int baseAddr,
                                         unsigned int csNum,
                                         unsigned int flag);
extern void  GPMCWaitMonitoringTimeSelect(unsigned int baseAddr,
                                          unsigned int csNum,
                                          unsigned int flag);
extern void  GPMCAddrDataMuxProtocolSelect(unsigned int baseAddr,
                                           unsigned int csNum,
                                           unsigned int protocol);
extern void  GPMCTimeParaGranularitySelect(unsigned int baseAddr,
                                           unsigned int csNum,
                                           unsigned int scaleftr);
extern void  GPMCRdAccessAndCycleTimeTimingConfig(unsigned int baseAddr,
                                                  unsigned int csNum,
                                                  unsigned int conf);
extern void  GPMCycle2CycleAndTurnArndTimeTimingConfig(unsigned int baseAddr,
                                                       unsigned int csNum,
                                                       unsigned int conf);
extern void  GPMCAccessTypeSelect(unsigned int baseAddr, unsigned int csNum,
                                  unsigned int mode, unsigned int accessType);
extern void  GPMCWaitPinMonitoringConfig(unsigned int baseAddr, unsigned int csNum,
                                         unsigned int mode, unsigned int flag);
extern void  GPMCWrAccessAndWrDataOnADMUXBusTimingConfig(unsigned int baseAddr,
                                                         unsigned int csNum,
                                                         unsigned int wrAccessTime,
                                                         unsigned int wrDataOnADmuxBus);

#ifdef __cplusplus
}
#endif
#endif