Weakness at the cutting_arm_clockwork2.stl

[Biffes]

Hi there,
my cutting arm broke after some time.

There's a point on the arm that's subject to high stress and is only supported by two layers of material.

I added a 0.6mm reinforcement at that point, and the arm seems noticeably more stable as a result. Perhaps the model should be reinforced accordingly.

Here is a screenshot in Orca (reworked model is above)

[Clon1998]

@Biffes Do you happen to have that file? I can not get it to print without breaking while removing the supports...

[thunderkeys]

@Biffes if this has been working for you and you have a step file, i can work to integrate it.

[Biffes]

Hi there,
thank you for your reply. I just slapped a layer (0.6mm) on the side. Cant export the file to stp. I attached the stl.

Filamatrix -Rework-1.zip