Merge pull request #1413 from HelmiBeh/patch-1

Update AS3935.md

docs/AS3935.md

@@ -49,7 +49,7 @@ In the **_Configuration -> Configure Module_** page assign:
 You will need to wire up all of the associated pins for the different boards.<br>
 - Always connect CS and MISO to GND.<br>
 - If "SI" is present, you need to connect to VCC.<br>
-See some wiring on the Board pictures below. [I~2~C wiring](#breakout-boards-and-wiring-for-I~2~C-use)
+See some wiring on the Board pictures below. [I^2^C wiring](#breakout-boards-and-wiring-for-I~2~C-use)
 
 ![Module Settings](https://user-images.githubusercontent.com/48546979/79037994-1bedab80-7bd6-11ea-88db-0d88dcb05628.png)
 
@@ -135,14 +135,14 @@ Setting table of the NF-noise sensitivity and stages:
 
 !!! tips "Hint and Tips"
 - take a stabilized power supply.
-- keep a distance of at least 200 mm from the ESP and the AS3395
+- keep a distance of at least 200 mm from the ESP and the AS3935
 - be careful with "ready to Use" devices like Sonoff, etc. they don't have a good power supply inside.
 - use a Ferrit clamp filter on the sensor cable.
-- wire all related Pins for I~2~C use.
+- wire all related Pins for I^2^C use.
 
 You can find some troubleshooting tips in the [Tasmota GitHub discussion](https://github.com/arendst/Tasmota/pull/8130).
 
-## Breakout Boards and Wiring for I~2~C use:
+## Breakout Boards and Wiring for I^2^C use:
 
 #### PlayingwithFusion Board:<br>
 ![AS3935](_media/peripherals/PWF_AS3935.jpg)<br>