-
|
Have been trying to build a HA instance supporting Predbat to operate my Solax G4 inverter + storage batteries and have got most of the sensors and controls sorted, but there is one which Predbat seems to want, but I cannot locate in the Solax Inverter Modbus integration (https://github.com/wills106/homeassistant-solax-modbus) : Predbat is asking for charge_discharge_update_button but I cannot locate this. Is this needed? For what? It seems to that the Solax Inverter Modbus integration does not have a "button" for submitting the updates to settings; there are various settings which are changed via drop-down or keyboard entry and I can confirm (via the Solax Cloud app) that they effect changes. So I'm wondering if there is a different way to set up the "apps" in Predbat to control the setting of the charge/discharge times, etc. in the Solax Inverter? |
Beta Was this translation helpful? Give feedback.
Replies: 1 comment
-
|
Have you come across the #259 issue thread? I put a guide to setting it up, using either the Mode1 remote control (#259 (comment)) or the newer Model 8 option (#259 (comment)). Both should work with the SolaX gen 4 inverters. The config lists the names of each sensor required (as well as how to make a missing load sensor). |
Beta Was this translation helpful? Give feedback.
Have you come across the #259 issue thread?
I put a guide to setting it up, using either the Mode1 remote control (#259 (comment)) or the newer Model 8 option (#259 (comment)). Both should work with the SolaX gen 4 inverters. The config lists the names of each sensor required (as well as how to make a missing load sensor).
Could you give one or the other a go and let me know if there are any issues.