domoticz with RFPlayer not working

[fadafido]

Hi,

I Installed domoticz on raspberry pi and attached the RFPlayer to the the USB.
I installed the plugin.
I added the device. see attached.
I clicked on my projector remote and it discovered one device. see attached
I tried the added new device but nothing happening.

I also added the projector to the device using the RFPlayer configuration parrot function and saved the 3 buttons to A1, A2, A3 and it is working fine from rfplayer configuration application.

and also paired the somfy RTS remote to A4 and it is working fine from rfplayer configuration application.

I tried to add the device manually, but no hardware is showing.

I tried to the "Learn light/switch", but it is not discovering anything.

appreciate your guide?

[rogereric]

Bonjour
je suis heureux de voir qu'il y a d'autre personne dans le même cas. Je ne comprends pas du tout ce qui se passe Rfplayer ver1.38 et domoticz ver4.1 et python 3.5

il y aurait il quelqu'un qui comprends le souci. Si j'associe mon recepteur chacon54755 par l'interface ziblue rfplayer cela fonctionne sans souci et je lui donne un ID A10 par exemple. Je vais dans domoticz et j'ai bien mon dispositif mais rien ne se passe lorsque j'envoie une trame ON

Status: User: Admin initiated a switch command (10/rfplay - Manual Switch - A10/On)
2019-01-20 14:31:51.316 (rfplay) Received 50 bytes of data
2019-01-20 14:31:51.316 (rfplay) Last Message was 14.083751 seconds ago, Message clear
2019-01-20 14:34:42.308 (rfplay) SendtoRfplayer - Options found in DB: {'id': 'A10', 'infoType': '1', 'protocol': '4'} for devices unit 1
2019-01-20 14:34:42.311 (rfplay) Sending 24 bytes of data
2019-01-20 14:34:42.718 (rfplay) Received 34 bytes of data
2019-01-20 14:34:42.719 (rfplay) Last Message was 171.402575 seconds ago, Message clear
2019-01-20 14:34:42.719 (rfplay) Received 16 bytes of data
2019-01-20 14:34:42.265 Status: User: Admin initiated a switch command (10/rfplay - Manual Switch - A10/Off)
2019-01-20 14:34:53.948 (rfplay) SendtoRfplayer - Options found in DB: {'id': 'A10', 'infoType': '1', 'protocol': '4'} for devices unit 1
2019-01-20 14:34:53.951 (rfplay) Sending 23 bytes of data
2019-01-20 14:34:53.920 Status: User: Admin initiated a switch command (10/rfplay - Manual Switch - A10/On)
2019-01-20 14:34:54.358 (rfplay) Received 50 bytes of data
2019-01-20 14:34:54.358 (rfplay) Last Message was 11.639125 seconds ago, Message clear

Merci beaucoup de l'aide
Eric