discourse-setup

#!/usr/bin/env bash
DIR="$( cd "$( dirname "${BASH_SOURCE[0]}" )" && pwd )"
cd $DIR

if [ "$1" == "2container" ]
then
  TWO_CONTAINER="1"
  echo "2container argument is deprecated. Use --two-container"
  shift 1
fi

while [ ${#} -gt 0 ]; do
  case "${1}" in
  --debug)
    DEBUG="1"
    SKIP_REBUILD="1"
    ;;
  --skip-rebuild)
    SKIP_REBUILD="1"
    ;;
  --two-container)
    TWO_CONTAINER="1"
    ;;
  --skip-connection-test)
    SKIP_CONNECTION_TEST="1"
    echo "skipping connection test"
    ;;
  esac

  shift 1
done

##
## Make sure only root can run our script
##
check_root() {
  if [[ $EUID -ne 0 ]]; then
    echo "This script must be run as root. Please sudo or log in as root first." 1>&2
    exit 1
  fi
}

##
## Check whether a connection to HOSTNAME ($1) on PORT ($2) is possible
##
connect_to_port () {
  HOST="$1"
  PORT="$2"
  VERIFY=$(date +%s | sha256sum | base64 | head -c 20)
  if ! [ -x "$(command -v nc)" ]; then
    echo "In order to check the connection to $HOST:$PORT we need to open a socket using netcat."
    echo However netcat is not installed on your system. You can continue without this check
    echo or abort the setup, install netcat and try again.
    while true; do
      read -p "Would you like to continue without this check? [yn] " yn
      case $yn in
        [Yy]*) return 2 ;;
        [Nn]*) exit ;;
        *) echo "Please answer y or n." ;;
      esac
    done
  else
    echo -e "HTTP/1.1 200 OK\n\n $VERIFY" | nc -w 4 -l -p $PORT >/dev/null 2>&1 &
    if curl --proto =http -s $HOST:$PORT --connect-timeout 3 | grep $VERIFY >/dev/null 2>&1; then
      return 0
    else
      curl --proto =http -s localhost:$PORT >/dev/null 2>&1
      return 1
    fi
  fi
}

check_IP_match() {
  HOST="$1"
  echo
  if [ "$SKIP_CONNECTION_TEST" == 1 ]
  then
    echo "Setting EC to 2"
    ec=2
  else
    echo Checking your domain name . . .
    connect_to_port $HOST 443; ec=$?
  fi
  case $ec in
    0)
      echo "Connection to $HOST succeeded."
      ;;
    1)
      echo "WARNING: Port 443 of computer does not appear to be accessible using hostname:  $HOST."
      if connect_to_port $HOST 80; then
        echo
        echo SUCCESS: A connection to port 80 succeeds!
        echo This suggests that your DNS settings are correct,
        echo but something is keeping traffic to port 443 from getting to your server.
        echo Check your networking configuration to see that connections to port 443 are allowed.
      else
        echo "WARNING: Connection to http://$HOST (port 80) also fails."
        echo
        echo "This suggests that $HOST resolves to some IP address that does not reach this "
        echo machine where you are installing discourse.
      fi
      echo
      echo "The first thing to do is confirm that $HOST resolves to the IP address of this server."
      echo You usually do this at the same place you purchased the domain.
      echo
      echo If you are sure that the IP address resolves correctly, it could be a firewall issue.
      echo A web search for  \"open ports YOUR CLOUD SERVICE\" might help.
      echo
      echo This tool is designed only for the most standard installations. If you cannot resolve
      echo the issue above, you will need to edit containers/app.yml yourself and then type
      echo
      echo                   ./launcher rebuild app
      echo
      exit 1
      ;;
    2)
      echo "Skipping port check."
      ;;
  esac
}

##
## Do we have docker?
##

check_docker() {
  (which docker || which docker.io) 2>/dev/null
  echo $?
}

check_and_install_docker() {
  found_docker=$(check_docker)
  if [ "$found_docker" -ne 0 ]; then
    echo Failed to find docker or docker.io on your PATH.
    read -p "Enter to install Docker from https://get.docker.com/ or Ctrl+C to exit"
    curl https://get.docker.com/ | sh

    found_docker=$(check_docker)
    if [ "$found_docker" -ne 0 ]; then
      echo Still failed to find docker or docker.io on your PATH.
      echo Docker install failed. Quitting.
      exit
    fi
  fi
}

##
## What are we running on
##
check_OS() {
  echo `uname -s`
}

##
## OS X available memory
##
check_osx_memory() {
  echo `free -m | awk '/Mem:/ {print $2}'`
}

##
## Linux available memory
##
check_linux_memory() {
  ## some VMs report just under 1GB of RAM, so
  ## make an exception and allow those with more
  ## than 989MB
  mem=`free -m --si | awk ' /Mem:/ {print $2}'`
  if [ "$mem" -ge 990 -a "$mem" -lt 1000 ]; then
    echo 1
  else
    echo `free -g --si | awk ' /Mem:/  {print $2} '`
  fi
}

##
## Do we have enough memory and disk space for Discourse?
##
check_disk_and_memory() {

  os_type=$(check_OS)
  avail_mem=0
  if [ "$os_type" == "Darwin" ]; then
    avail_mem=$(check_osx_memory)
  else
    avail_mem=$(check_linux_memory)
  fi

  if [ "$avail_mem" -lt 1 ]; then
    echo "WARNING: Discourse requires 1GB RAM to run. This system does not appear"
    echo "to have sufficient memory."
    echo
    echo "Your site may not work properly, or future upgrades of Discourse may not"
    echo "complete successfully."
    exit 1
  fi

  if [ "$avail_mem" -le 2 ]; then
    total_swap=`free -g --si | awk ' /Swap:/  {print $2} '`

    if [ "$total_swap" -lt 2 ]; then
      echo "WARNING: Discourse requires at least 2GB of swap when running with 2GB of RAM"
      echo "or less. This system does not appear to have sufficient swap space."
      echo
      echo "Without sufficient swap space, your site may not work properly, and future"
      echo "upgrades of Discourse may not complete successfully."
      echo
      echo "Ctrl+C to exit or wait 5 seconds to have a 2GB swapfile created."
      sleep 5

      ##
      ## derived from https://meta.discourse.org/t/13880
      ##
      install -o root -g root -m 0600 /dev/null /swapfile
      fallocate -l 2G /swapfile
      mkswap /swapfile
      swapon /swapfile
      echo "/swapfile       swap    swap    auto      0       0" | tee -a /etc/fstab
      sysctl -w vm.swappiness=10
      echo 'vm.swappiness = 10' > /etc/sysctl.d/30-discourse-swap.conf

      total_swap=`free -g --si | awk ' /Swap:/ {print $2} '`
      if [ "$total_swap" -lt 2 ]; then
        echo "Failed to create swap: are you root? Are you running on real hardware, or a fully virtualized server?"
        exit 1
      fi

    fi
  fi

  free_disk="$(df /var | tail -n 1 | awk '{print $4}')"
  if [ "$free_disk" -lt 5000 ]; then
    echo "WARNING: Discourse requires at least 5GB free disk space. This system"
    echo "does not appear to have sufficient disk space."
    echo
    echo "Insufficient disk space may result in problems running your site, and"
    echo "may not even allow Discourse installation to complete successfully."
    echo
    echo "Please free up some space, or expand your disk, before continuing."
    echo
    echo "Run \`apt-get autoremove && apt-get autoclean\` to clean up unused"
    echo "packages and \`./launcher cleanup\` to remove stale Docker containers."
    exit 1
  fi

}


##
## If we have lots of RAM or lots of CPUs, bump up the defaults to scale better
##
scale_ram_and_cpu() {

  local changelog=/tmp/changelog.$PPID
  # grab info about total system ram and physical (NOT LOGICAL!) CPU cores
  avail_gb=0
  avail_cores=0
  os_type=$(check_OS)
  if [ "$os_type" == "Darwin" ]; then
    avail_gb=$(check_osx_memory)
    avail_cores=`sysctl hw.ncpu | awk '/hw.ncpu:/ {print $2}'`
  else
    avail_gb=$(check_linux_memory)
    avail_cores=$((`awk '/cpu cores/ {print $4;exit}' /proc/cpuinfo`*`sort /proc/cpuinfo | uniq | grep -c "physical id"`))
  fi
  echo "Found ${avail_gb}GB of memory and $avail_cores physical CPU cores"

  # db_shared_buffers: 128MB for 1GB, 256MB for 2GB, or 256MB * GB, max 4096MB
  if [ "$avail_gb" -eq "1" ]
  then
    db_shared_buffers=128
  else
    if [ "$avail_gb" -eq "2" ]
    then
      db_shared_buffers=256
    else
      db_shared_buffers=$(( 256 * $avail_gb ))
    fi
  fi
  db_shared_buffers=$(( db_shared_buffers < 4096 ? db_shared_buffers : 4096 ))

  sed -i -e "s/^  #\?db_shared_buffers:.*/  db_shared_buffers: \"${db_shared_buffers}MB\"/w $changelog" $data_file
  if [ -s $changelog ]
  then
    echo "setting db_shared_buffers = ${db_shared_buffers}MB"
    rm $changelog
  fi

  # UNICORN_WORKERS: 2 * GB for 2GB or less, or 2 * CPU, max 8
  if [ "$avail_gb" -le "2" ]
  then
    unicorn_workers=$(( 2 * $avail_gb ))
  else
    unicorn_workers=$(( 2 * $avail_cores ))
  fi
  unicorn_workers=$(( unicorn_workers < 8 ? unicorn_workers : 8 ))

  sed -i -e "s/^  #\?UNICORN_WORKERS:.*/  UNICORN_WORKERS: ${unicorn_workers}/w $changelog" $web_file
  if [ -s $changelog ]
  then
    echo "setting UNICORN_WORKERS = ${unicorn_workers}"
    rm $changelog
  fi

  echo $data_file memory parameters updated.
}


##
## standard http / https ports must not be occupied
##
check_ports() {
  check_port "80"
  check_port "443"
  echo "Ports 80 and 443 are free for use"
}


##
## check a port to see if it is already in use
##
check_port() {

  local valid=$(lsof -i:${1} | grep "LISTEN")

  if [ -n "$valid" ]; then
    echo "Port ${1} appears to already be in use."
    echo
    echo "This will show you what command is using port ${1}"
    lsof -i tcp:${1} -s tcp:listen
    echo
    echo "If you are trying to run Discourse simultaneously with another web"
    echo "server like Apache or nginx, you will need to bind to a different port"
    echo
    echo "See https://meta.discourse.org/t/17247"
    echo
    echo "If you are reconfiguring an already-configured Discourse, use "
    echo
    echo "./launcher stop app"
    echo
    echo "to stop Discourse before you reconfigure it and try again."
    exit 1
  fi
}

##
## read a variable from the config file
##
read_config() {
  config_line=`egrep "^  #?$1:" $web_file`
  read_config_result=`echo $config_line | awk  -F":" '{print $2}'`
  read_config_result=`echo $read_config_result | sed "s/^\([\"']\)\(.*\)\1\$/\2/g"`
}

read_default() {
  config_line=`egrep "^  #?$1:" samples/standalone.yml`
  read_default_result=`echo $config_line | awk  -F":" '{print $2}'`
  read_default_result=`echo $read_config_result | sed "s/^\([\"']\)\(.*\)\1\$/\2/g"`
}

assert_maxmind_license_key() {
  if  ! grep DISCOURSE_MAXMIND_LICENSE_KEY $web_file >/dev/null 2>&1
  then
    echo "Adding MAXMIND placeholder to $web_file"
    sed -i '/^.*LETSENCRYPT_ACCOUNT_EMAIL.*/a \ \ #DISCOURSE_MAXMIND_LICENSE_KEY: 1234567890123456' $web_file
  fi
  if  ! grep DISCOURSE_MAXMIND_LICENSE_KEY $web_file >/dev/null 2>&1
  then
    cat <<EOF

    Adding DISCOURSE_MAXMIND_LICENSE_KEY to $web_file has failed! This
    indicates either that your $web_file is very old or otherwise not
    what the script expects or that there is a bug in this script. The
    best solution for a novice is to delete $web_file and start over.
    An expert might prefer to edit $web_file by hand.

EOF
    read -p "Press return to continue or control-c to quit..."
  fi
}

assert_smtp_domain() {
  if  ! grep DISCOURSE_SMTP_DOMAIN $web_file >/dev/null 2>&1
  then
    echo "Adding SMTP_DOMAIN placeholder to $web_file"
    sed -i '/^.*DISCOURSE_SMTP_PASSWORD.*/a \ \ #DISCOURSE_SMTP_DOMAIN: discourse.example.com    # (required by some providers)' $web_file
  fi
  if  ! grep DISCOURSE_SMTP_DOMAIN $web_file >/dev/null 2>&1
  then
    cat <<EOF

    Adding DISCOURSE_SMTP_DOMAIN to $web_file has failed! This
    indicates either that your $web_file is very old or otherwise not
    what the script expects or that there is a bug in this script. The
    best solution for a novice is to delete $web_file and start over.
    An expert might prefer to edit $web_file by hand.

EOF
    read -p "Press return to continue or control-c to quit..."
  fi
}


assert_notification_email() {
  if  ! grep DISCOURSE_NOTIFICATION_EMAIL $web_file >/dev/null 2>&1
  then
    echo "Adding DISCOURSE_NOTIFICATION_EMAIL placeholder to $web_file"
    sed -i '/^.*DISCOURSE_SMTP_PASSWORD.*/a \ \ #DISCOURSE_NOTIFICATION_EMAIL: nobody@discourse.example.com    # (address to send notifications from)' $web_file
  fi
  if  ! grep DISCOURSE_NOTIFICATION_EMAIL $web_file >/dev/null 2>&1
  then
    cat <<EOF

    Adding DISCOURSE_NOTIFICATION_EMAIL to $web_file has failed! This
    indicates either that your $web_file is very old or otherwise not
    what the script expects or that there is a bug in this script. The
    best solution for a novice is to delete $web_file and start over.
    An expert might prefer to edit $web_file by hand.

EOF
    read -p "Press return to continue or control-c to quit..."
  fi
}


##
## prompt user for typical Discourse config file values
##
ask_user_for_config() {

  # NOTE: Defaults now come from standalone.yml

  read_config "DISCOURSE_HOSTNAME"
  hostname=$read_config_result
  local changelog=/tmp/changelog.$PPID
  read_config "DISCOURSE_SMTP_ADDRESS"
  local smtp_address=$read_config_result
  # NOTE: if there are spaces between emails, this breaks, but a human should be paying attention
  read_config "DISCOURSE_DEVELOPER_EMAILS"
  local developer_emails=$read_config_result
  read_config "DISCOURSE_SMTP_PASSWORD"
  local smtp_password=$read_config_result
  read_config "DISCOURSE_SMTP_PORT"
  local smtp_port=$read_config_result
  read_config "DISCOURSE_SMTP_USER_NAME"
  local smtp_user_name=$read_config_result
  if [ "$smtp_password" = "pa$$word" ]
  then
    smtp_password = ""
  fi
  read_config "DISCOURSE_NOTIFICATION_EMAIL"
  local notification_email=$read_config_result
  read_config "DISCOURSE_SMTP_DOMAIN"
  local discourse_smtp_DOMAIN=$read_config_result

  read_config "LETSENCRYPT_ACCOUNT_EMAIL"
  local letsencrypt_account_email=$read_config_result
  if [ -z $letsencrypt_account_email ]
  then
    letsencrypt_account_email="me@example.com"
  fi
  if [ "$letsencrypt_account_email" = "me@example.com" ]
  then
    local letsencrypt_status="ENTER to skip"
  else
    local letsencrypt_status="Enter 'OFF' to disable."
  fi

  read_config "DISCOURSE_MAXMIND_LICENSE_KEY"
  local maxmind_license_key=$read_config_result
  if [ -z $maxmind_license_key ]
  then
    maxmind_license_key="1234567890123456"
  fi
  if [ "$maxmind_license_key" == "1234567890123456" ]
  then
    local maxmind_status="ENTER to continue without MAXMIND GeoLite2 geolocation database"
  fi

  local new_value=""
  local config_ok="n"
  local update_ok="y"

  echo ""

  while [[ "$config_ok" == "n" ]]
  do
    if [ ! -z "$hostname" ]
    then
      read -p "Hostname for your Discourse? [$hostname]: " new_value
      if [ ! -z "$new_value" ]
      then
        hostname="$new_value"
      fi
      if [[ $hostname =~ ^[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}$ ]]
      then
        echo
        echo "Discourse requires a DNS hostname. IP addresses are unsupported and will not work."
        echo
        hostname="discourse.example.com"
      fi
    fi

    check_IP_match $hostname

    if [ ! -z "$developer_emails" ]
    then
      local email_valid="n"
      until [ "$email_valid" == "y" ]
      do
        read -p "Email address for admin account(s)? [$developer_emails]: " new_value
        if [ ! -z "$new_value" ]
        then
          if [[ ${#new_value} -ge 7 && $new_value == *@* ]]
          then
            developer_emails="$new_value"
            email_valid="y"
          else
            echo
            echo "[Error] Invalid email address"
            echo
          fi
        else
          email_valid="y"
        fi
      done
    fi

    if [ ! -z "$smtp_address" ]
    then
      read -p "SMTP server address? [$smtp_address]: " new_value
      if [ ! -z "$new_value" ]
      then
        smtp_address="$new_value"
      fi
    fi

    if [ ! -z "$smtp_port" ]
    then
      read -p "SMTP port? [$smtp_port]: " new_value
      if [ ! -z "$new_value" ]
      then
        smtp_port="$new_value"
      fi
    fi

    ##
    ## automatically set correct user name based on common mail providers unless it's been set
    ##
    if [ "$smtp_user_name" == "user@example.com" ]
    then
      if [ "$smtp_address" == "smtp.sparkpostmail.com" ]
      then
      	smtp_user_name="SMTP_Injection"
      fi
      if [ "$smtp_address" == "smtp.sendgrid.net" ]
      then
        smtp_user_name="apikey"
      fi
      if [ "$smtp_address" == "smtp.mailgun.org" ]
      then
        smtp_user_name="postmaster@$hostname"
      fi
    fi

    if [ ! -z "$smtp_user_name" ]
    then
      read -p "SMTP user name? [$smtp_user_name]: " new_value
      if [ ! -z "$new_value" ]
      then
        smtp_user_name="$new_value"
      fi
    fi

    read -p "SMTP password? [$smtp_password]: " new_value
    if [ ! -z "$new_value" ]
    then
      smtp_password="$new_value"
    fi

    if [[ "$notification_email" == "noreply@discourse.example.com"* ]]
    then
      notification_email="noreply@$hostname"
    fi

    read -p "notification email address? [$notification_email]: " new_value
    if [ ! -z "$new_value" ]
    then
      notification_email="$new_value"
    fi

    # set smtp_domain default value here rather than use Rails default of localhost
    smtp_domain=$(echo $notification_email | sed -e "s/.*@//")

    if [ ! -z $letsencrypt_account_email ]
    then
      read -p "Optional email address for Let's Encrypt warnings? ($letsencrypt_status) [$letsencrypt_account_email]: " new_value
      if [ ! -z "$new_value" ]
      then
        letsencrypt_account_email="$new_value"
        if [ "${new_value,,}" = "off" ]
        then
          letsencrypt_status="ENTER to skip"
        else
          letsencrypt_status="Enter 'OFF' to disable."
        fi
      fi
    fi

    read_config "DISCOURSE_MAXMIND_LICENSE_KEY"
    local maxmind_license_key=$read_config_result
    read -p "Optional Maxmind License key ($maxmind_status) [$maxmind_license_key]: " new_value
    if [ ! -z "$new_value" ]
    then
      maxmind_license_key="$new_value"
    fi

    echo -e "\nDoes this look right?\n"
    echo "Hostname          : $hostname"
    echo "Email             : $developer_emails"
    echo "SMTP address      : $smtp_address"
    echo "SMTP port         : $smtp_port"
    echo "SMTP username     : $smtp_user_name"
    echo "SMTP password     : $smtp_password"
    echo "Notification email: $notification_email"

    if [ "$letsencrypt_status" == "Enter 'OFF' to disable." ]
    then
      echo "Let's Encrypt : $letsencrypt_account_email"
    fi

    if [ "$maxmind_license_key" != "1234567890123456" ]
    then
      echo "Maxmind license: $maxmind_license_key"
    else
      echo "Maxmind license: (unset)"
    fi

    echo ""
    read -p "ENTER to continue, 'n' to try again, Ctrl+C to exit: " config_ok
  done

  sed -i -e "s/^  DISCOURSE_HOSTNAME:.*/  DISCOURSE_HOSTNAME: $hostname/w $changelog" $web_file
  if [ -s $changelog ]
  then
    rm $changelog
  else
    echo "DISCOURSE_HOSTNAME change failed."
    update_ok="n"
  fi

  sed -i -e "s/^  DISCOURSE_DEVELOPER_EMAILS:.*/  DISCOURSE_DEVELOPER_EMAILS: \'$developer_emails\'/w $changelog" $web_file
  if [ -s $changelog ]
  then
    rm $changelog
  else
    echo "DISCOURSE_DEVELOPER_EMAILS change failed."
    update_ok="n"
  fi

  sed -i -e "s/^  DISCOURSE_SMTP_ADDRESS:.*/  DISCOURSE_SMTP_ADDRESS: $smtp_address/w $changelog" $web_file
  if [ -s $changelog ]
  then
    rm $changelog
  else
    echo "DISCOURSE_SMTP_ADDRESS change failed."
    update_ok="n"
  fi

  sed -i -e "s/^  #\?DISCOURSE_SMTP_PORT:.*/  DISCOURSE_SMTP_PORT: $smtp_port/w $changelog" $web_file
  if [ -s $changelog ]
  then
    rm $changelog
  else
    echo "DISCOURSE_SMTP_PORT change failed."
    update_ok="n"
  fi

  sed -i -e "s/^  #\?DISCOURSE_SMTP_USER_NAME:.*/  DISCOURSE_SMTP_USER_NAME: $smtp_user_name/w $changelog" $web_file
  if [ -s $changelog ]
  then
    rm $changelog
  else
    echo "DISCOURSE_SMTP_USER_NAME change failed."
    update_ok="n"
  fi

  sed -i -e "s/^  #\?DISCOURSE_NOTIFICATION_EMAIL:.*/  DISCOURSE_NOTIFICATION_EMAIL: $notification_email/w $changelog" $web_file
  if [ -s $changelog ]
  then
    rm $changelog
  else
    echo "DISCOURSE_NOTIFICATION_EMAIL change failed."
    update_ok="n"
  fi

  sed -i -e "s/^  #\?DISCOURSE_SMTP_DOMAIN:.*/  DISCOURSE_SMTP_DOMAIN: $smtp_domain/w $changelog" $web_file
  if [ -s $changelog ]
  then
    rm $changelog
  else
    echo "DISCOURSE_SMTP_DOMAIN change failed."
    update_ok="n"
  fi

  if [[ "$smtp_password" == *"\""* ]]
  then
    SLASH="BROKEN"
    echo "========================================"
    echo "WARNING!!!"
    echo "Your password contains a quote (\")"
    echo "Your SMTP Password will not be set. You will need to edit app.yml to enter it."
    echo "========================================"
    update_ok="n"
  else
    SLASH="|"
    if [[ "$smtp_password" == *"$SLASH"* ]]
    then SLASH="+"
         if [[ "$smtp_password" == *"$SLASH"* ]]
         then
           SLASH="Q"
           if [[ "$smtp_password" == *"$SLASH"* ]]
	   then
	     SLASH="BROKEN"
             echo "========================================"
             echo "WARNING!!!"
             echo "Your password contains all available delimiters (+, |, and Q). "
             echo "Your SMTP Password will not be set. You will need to edit app.yml to enter it."
             echo "========================================"
             update_ok="n"
           fi
         fi
    fi
  fi
  if [[ "$SLASH" != "BROKEN" ]]
  then
    sed -i -e "s${SLASH}^  #\?DISCOURSE_SMTP_PASSWORD:.*${SLASH}  DISCOURSE_SMTP_PASSWORD: \"${smtp_password}\"${SLASH}w $changelog" $web_file

    if [ -s $changelog ]
    then
      rm $changelog
    else
      echo "DISCOURSE_SMTP_PASSWORD change failed."
      update_ok="n"
    fi
  fi

  if ! [ -z $DEBUG ]
  then
    echo "Enabling Let's Encrypt"
  fi
  sed -i -e "s/^  #\?LETSENCRYPT_ACCOUNT_EMAIL:.*/  LETSENCRYPT_ACCOUNT_EMAIL: $letsencrypt_account_email/w $changelog" $web_file
  if [ -s $changelog ]
  then
    rm $changelog
  else
    echo "LETSENCRYPT_ACCOUNT_EMAIL change failed."
    update_ok="n"
  fi
  local src='^  #\?- "templates\/web.ssl.template.yml"'
  local dst='  \- "templates\/web.ssl.template.yml"'
  sed -i -e "s/$src/$dst/w $changelog" $web_file
  if [ -s $changelog ]
  then
  if ! [ -z $DEBUG ]
    then
      echo "web.ssl.template.yml enabled"
    fi
  else
    update_ok="n"
    echo "web.ssl.template.yml NOT ENABLED--was it on already?"
  fi
  local src='^  #\?- "templates\/web.letsencrypt.ssl.template.yml"'
  local dst='  - "templates\/web.letsencrypt.ssl.template.yml"'

  sed -i -e "s/$src/$dst/w $changelog" $web_file
  if [ -s $changelog ]
  then
    echo "letsencrypt.ssl.template.yml enabled"
  else
    update_ok="n"
    echo "letsencrypt.ssl.template.yml NOT ENABLED -- was it on already?"
  fi

  echo
  if [ $maxmind_license_key != "1234567890123456" ]
  then
    sed -i -e "s/^.*DISCOURSE_MAXMIND_LICENSE_KEY:.*/  DISCOURSE_MAXMIND_LICENSE_KEY: $maxmind_license_key/w $changelog" $web_file
    if [ -s $changelog ]
    then
      rm $changelog
    else
      echo "DISCOURSE_MAXMIND_LICENSE_KEY change failed."
      update_ok="n"
    fi
  fi

  if [ "$update_ok" == "y" ]
  then
    echo -e "\nConfiguration file at $web_file updated successfully!\n"
  else
    echo -e "\nUnfortunately, there was an error changing $web_file\n"
    echo -e "This may happen if you have made unexpected changes."
    exit 1
  fi
}

##
## is our config file valid? Does it have the required fields set?
##
validate_config() {

  valid_config="y"

  for x in DISCOURSE_SMTP_ADDRESS DISCOURSE_SMTP_USER_NAME DISCOURSE_SMTP_PASSWORD \
                                  DISCOURSE_DEVELOPER_EMAILS DISCOURSE_HOSTNAME
  do
    read_config $x
    local result=$read_config_result
    read_default $x
    local default=$read_default_result

    if [ ! -z "$result" ]
    then
      if [[ "$config_line" = *"$default"* ]]
      then
        echo "$x left at incorrect default of $default"
        valid_config="n"
      fi
      config_val=`echo $config_line | awk '{print $2}'`
      if [ -z $config_val ]
      then
        echo "$x was not configured"
        valid_config="n"
      fi
    else
      echo "$x not present"
      valid_config="n"
    fi
  done

  if [ "$valid_config" != "y" ]; then
    echo -e "\nSorry, these $web_file settings aren't valid -- can't continue!"
    echo "If you have unusual requirements, edit $web_file and then: "
    echo "./launcher bootstrap $app_name"
    exit 1
  fi
}


##
## template file names
##

if [ "$TWO_CONTAINER" ] || [ -f containers/web_only.yml ]
then
  app_name=web_only
  data_name=data
  web_template=samples/web_only.yml
  data_template=samples/data.yml
  web_file=containers/$app_name.yml
  data_file=containers/$data_name.yml
else
  app_name=app
  data_name=app
  web_template=samples/standalone.yml
  data_template=""
  web_file=containers/$app_name.yml
  data_file=containers/$app_name.yml
fi
changelog=/tmp/changelog

##
## Check requirements before creating a copy of a config file we won't edit
##
check_root
check_and_install_docker
check_disk_and_memory

if [ -a "$web_file" ]
then
  echo "The configuration file $web_file already exists!"
  echo
  echo ". . . reconfiguring . . ."
  echo
  echo
  DATE=`date +"%Y-%m-%d-%H%M%S"`
  BACKUP=$app_name.yml.$DATE.bak
  echo Saving old file as $BACKUP
  cp $web_file containers/$BACKUP
  if [ "$DEBUG" != "1" ]
  then
    echo "Stopping existing container in 5 seconds or Control-C to cancel."
    sleep 5
  else
    echo "DEBUG MODE ON. Not stopping the container."
  fi
  ./launcher stop $app_name
  assert_maxmind_license_key
  assert_notification_email
  assert_smtp_domain
  echo
else
  if [ "$SKIP_CONNECTION_TEST" != 1 ]
  then
    check_ports
  fi
  cp -v $web_template $web_file
  if [ "$data_name" == "data" ]
  then
    echo "--------------------------------------------------"
    echo "This two container setup is currently unsupported. Use at your own risk!"
    echo "--------------------------------------------------"
    DISCOURSE_DB_PASSWORD=`date +%s | sha256sum | base64 | head -c 20`

    sed -i -e "s/DISCOURSE_DB_PASSWORD: SOME_SECRET/DISCOURSE_DB_PASSWORD: $DISCOURSE_DB_PASSWORD/w $changelog" $web_file
    if  [ -s $changelog ]
    then
      rm $changelog
    else
      echo "Problem changing DISCOURSE_DB_PASSWORD" in $web_file
    fi

    cp -v $data_template $data_file
    quote=\'
    sed -i -e "s/password ${quote}SOME_SECRET${quote}/password '$DISCOURSE_DB_PASSWORD'/w $changelog" $data_file
    if  [ -s $changelog ]
    then
      rm $changelog
    else
      echo "Problem changing DISCOURSE_DB_PASSWORD" in $data_file
    fi
  fi
fi

scale_ram_and_cpu
ask_user_for_config
validate_config

##
## if we reach this point without exiting, OK to proceed
## rebuild won't fail if there's nothing to rebuild and does the restart
##
if [ "$SKIP_REBUILD" ]
then
  echo "Updates successful. --skip-rebuild requested. Exiting."
  exit
fi

echo "Updates successful. Rebuilding in 5 seconds."
sleep 5 # Just a chance to ^C in case they were too fast on the draw

if [ "$data_name" == "$app_name" ]
then
  echo Building $app_name
  ./launcher rebuild $app_name
else
  echo Building $data_name now . . .
  ./launcher rebuild $data_name
  echo Building $app_name now . . .
  ./launcher rebuild $app_name
fi