From 5ac3eb012795ae192326e601b9812b35d8c2d2ba Mon Sep 17 00:00:00 2001 From: WuMinlong <726485702@qq.com> Date: Wed, 15 Apr 2026 15:19:15 +0800 Subject: [PATCH 1/4] docs: radxa nx5 update tutorial --- docs/common/dev/_rsdk.mdx | 33 ++-- docs/common/dev/_u-boot.mdx | 2 +- docs/common/radxa-os/rkdevtool/_use.mdx | 2 +- .../radxa-os/system-config-debian12/_vnc.mdx | 2 +- docs/som/nx/nx5/README.md | 148 ++++++++++----- docs/som/nx/nx5/accessories/README.md | 7 - docs/som/nx/nx5/accessories/camera.md | 66 ------- docs/som/nx/nx5/accessories/pd-30w.md | 9 - docs/som/nx/nx5/accessories/wifi_bt_access.md | 47 ----- docs/som/nx/nx5/android/README.md | 9 - docs/som/nx/nx5/android/app-dev.md | 5 - docs/som/nx/nx5/android/install-os.mdx | 112 ----------- docs/som/nx/nx5/android/low-level-dev.md | 69 ------- docs/som/nx/nx5/android/remote-login.md | 128 ------------- docs/som/nx/nx5/android/system-config.md | 5 - docs/som/nx/nx5/download.md | 53 ++++++ docs/som/nx/nx5/getting-started/README.md | 4 +- .../nx/nx5/getting-started/accessory-usage.md | 61 ------ docs/som/nx/nx5/getting-started/download.md | 43 ----- .../som/nx/nx5/getting-started/install-os.mdx | 27 --- .../getting-started/install-system/README.md | 7 + .../install-system/emmc-system/README.md | 7 + .../emmc-system/enter-maskrom.md | 14 ++ .../emmc-system/install-emmc.md | 43 +++++ .../emmc-system/install-rkdevtool.md | 14 ++ .../install-system/microsd-system.md | 36 ++++ .../som/nx/nx5/getting-started/preparation.md | 38 ---- .../nx/nx5/getting-started/quickly-start.md | 102 ++++++++++ docs/som/nx/nx5/hardware-use/README.md | 7 + .../hw-interface.md => hardware-use/gpio.md} | 77 ++------ docs/som/nx/nx5/hardware-use/hardware-info.md | 66 +++++++ docs/som/nx/nx5/hardware/README.md | 7 - docs/som/nx/nx5/hardware/hw-revision.md | 10 - docs/som/nx/nx5/low-level-dev/README.md | 9 + docs/som/nx/nx5/low-level-dev/kernel.md | 15 ++ .../nx5/{radxa-os => }/low-level-dev/rsdk.md | 6 +- docs/som/nx/nx5/low-level-dev/u-boot.md | 15 ++ docs/som/nx/nx5/radxa-os/README.md | 7 - docs/som/nx/nx5/radxa-os/ap.md | 12 -- docs/som/nx/nx5/radxa-os/app-dev/README.md | 9 - docs/som/nx/nx5/radxa-os/app-dev/ai/README.md | 9 - docs/som/nx/nx5/radxa-os/app-dev/ai/clip.md | 14 -- .../nx/nx5/radxa-os/app-dev/ai/deeplabv3.md | 14 -- docs/som/nx/nx5/radxa-os/app-dev/ai/lprnet.md | 14 -- .../nx/nx5/radxa-os/app-dev/ai/mobilenet.md | 14 -- .../nx/nx5/radxa-os/app-dev/ai/mobilesam.md | 14 -- docs/som/nx/nx5/radxa-os/app-dev/ai/ppocr.md | 14 -- .../som/nx/nx5/radxa-os/app-dev/ai/ppyoloe.md | 14 -- docs/som/nx/nx5/radxa-os/app-dev/ai/resnet.md | 14 -- .../nx/nx5/radxa-os/app-dev/ai/retinaface.md | 14 -- .../radxa-os/app-dev/ai/rkllm-deepseek-r1.md | 14 -- .../nx5/radxa-os/app-dev/ai/rkllm-install.md | 14 -- .../nx5/radxa-os/app-dev/ai/rkllm-qwen2-vl.md | 15 -- .../nx5/radxa-os/app-dev/ai/rkllm-smolvlm2.md | 15 -- .../nx/nx5/radxa-os/app-dev/ai/rkllm-usage.md | 14 -- .../radxa-os/app-dev/ai/rknn-custom-yolo.md | 15 -- .../nx5/radxa-os/app-dev/ai/rknn-install.md | 14 -- .../nx5/radxa-os/app-dev/ai/rknn-model-zoo.md | 14 -- .../radxa-os/app-dev/ai/rknn-quick-start.md | 14 -- .../app-dev/ai/rknn-stable-diffusion.md | 15 -- .../app-dev/ai/rknn-toolkit-lite2-yolov5.md | 14 -- .../app-dev/ai/rknn-toolkit-lite2-yolov8.md | 15 -- .../radxa-os/app-dev/ai/rknn-toolkit2-pc.md | 15 -- .../radxa-os/app-dev/ai/rknn-ultralytics.md | 15 -- .../nx/nx5/radxa-os/app-dev/ai/wav2vec2.md | 14 -- .../som/nx/nx5/radxa-os/app-dev/ai/whisper.md | 14 -- .../nx/nx5/radxa-os/app-dev/ai/yolo-world.md | 14 -- .../app-dev/ai/yolov8-multi-stream.md | 15 -- .../nx/nx5/radxa-os/app-dev/ai/yolov8-seg.md | 14 -- docs/som/nx/nx5/radxa-os/app-dev/ai/yolov8.md | 14 -- docs/som/nx/nx5/radxa-os/app-dev/mraa.md | 14 -- .../som/nx/nx5/radxa-os/app-dev/venv_usage.md | 14 -- .../som/nx/nx5/radxa-os/apps-deploy/README.md | 9 - .../som/nx/nx5/radxa-os/apps-deploy/docker.md | 29 --- docs/som/nx/nx5/radxa-os/apps-deploy/samba.md | 5 - docs/som/nx/nx5/radxa-os/fcitx-usage.md | 15 -- docs/som/nx/nx5/radxa-os/install-os.mdx | 112 ----------- .../nx/nx5/radxa-os/low-level-dev/README.md | 9 - .../nx/nx5/radxa-os/low-level-dev/kernel.md | 52 ------ .../low-level-dev/rk_anti_copy_board.md | 18 -- .../radxa-os/low-level-dev/rkdeveloptool.md | 10 - .../nx5/radxa-os/low-level-dev/rkdevtool.md | 12 -- .../nx/nx5/radxa-os/low-level-dev/serial.md | 12 -- .../nx/nx5/radxa-os/low-level-dev/u-boot.md | 50 ----- .../radxa-os/low-level-dev/upgrade-tool.md | 12 -- docs/som/nx/nx5/radxa-os/mali-gpu.md | 12 -- docs/som/nx/nx5/radxa-os/os-usage/README.md | 174 ------------------ docs/som/nx/nx5/radxa-os/sys-config/README.md | 9 - .../nx/nx5/radxa-os/sys-config/bootparam.md | 12 -- docs/som/nx/nx5/radxa-os/sys-config/rsetup.md | 10 - docs/som/nx/nx5/radxa-os/wayland.md | 12 -- docs/som/nx/nx5/system-use/README.md | 7 + docs/som/nx/nx5/system-use/appuse.md | 14 ++ docs/som/nx/nx5/system-use/audio.md | 14 ++ docs/som/nx/nx5/system-use/autologin.md | 14 ++ docs/som/nx/nx5/system-use/back-system.md | 14 ++ docs/som/nx/nx5/system-use/blue.md | 25 +++ docs/som/nx/nx5/system-use/chineseenv.md | 14 ++ docs/som/nx/nx5/system-use/eth.md | 14 ++ docs/som/nx/nx5/system-use/rsetup.md | 14 ++ docs/som/nx/nx5/system-use/ssh.md | 14 ++ docs/som/nx/nx5/system-use/uart.md | 48 +++++ docs/som/nx/nx5/system-use/vnc.md | 14 ++ docs/som/nx/nx5/system-use/wifi.md | 23 +++ .../common/tools/rkdevtool/maskrom-nx5.webp | Bin 0 -> 73262 bytes static/img/nx5/maskrom-nx5.webp | Bin 0 -> 73262 bytes static/img/nx5/radxa-nx5-boot-system.webp | Bin 0 -> 70280 bytes static/img/nx5/radxa-nx5-dev-kit-view.webp | Bin 0 -> 68210 bytes .../img/nx5/radxa-nx5-devkit-interface.webp | Bin 0 -> 69736 bytes .../img/nx5/radxa-nx5-emmc-boot-system.webp | Bin 0 -> 70844 bytes static/img/nx5/radxa-nx5-interface.webp | Bin 0 -> 65444 bytes .../img/nx5/radxa-nx5-io-board-interface.webp | Bin 0 -> 65080 bytes static/img/nx5/radxa-nx5-io-board-view.webp | Bin 0 -> 68630 bytes static/img/nx5/radxa-nx5-login.webp | Bin 0 -> 10744 bytes .../nx5/radxa-nx5-microsd-boot-system.webp | Bin 0 -> 77048 bytes static/img/nx5/radxa-nx5-uart.webp | Bin 0 -> 85976 bytes static/img/nx5/radxa-nx5-view.webp | Bin 0 -> 61868 bytes static/img/nx5/rk3588s_block_diagram.webp | Bin 0 -> 91420 bytes 118 files changed, 760 insertions(+), 1827 deletions(-) delete mode 100644 docs/som/nx/nx5/accessories/README.md delete mode 100644 docs/som/nx/nx5/accessories/camera.md delete mode 100644 docs/som/nx/nx5/accessories/pd-30w.md delete mode 100644 docs/som/nx/nx5/accessories/wifi_bt_access.md delete mode 100644 docs/som/nx/nx5/android/README.md delete mode 100644 docs/som/nx/nx5/android/app-dev.md delete mode 100644 docs/som/nx/nx5/android/install-os.mdx delete mode 100644 docs/som/nx/nx5/android/low-level-dev.md delete mode 100644 docs/som/nx/nx5/android/remote-login.md delete mode 100644 docs/som/nx/nx5/android/system-config.md create mode 100644 docs/som/nx/nx5/download.md delete mode 100644 docs/som/nx/nx5/getting-started/accessory-usage.md delete mode 100644 docs/som/nx/nx5/getting-started/download.md delete mode 100644 docs/som/nx/nx5/getting-started/install-os.mdx create mode 100644 docs/som/nx/nx5/getting-started/install-system/README.md create mode 100644 docs/som/nx/nx5/getting-started/install-system/emmc-system/README.md create mode 100644 docs/som/nx/nx5/getting-started/install-system/emmc-system/enter-maskrom.md create mode 100644 docs/som/nx/nx5/getting-started/install-system/emmc-system/install-emmc.md create mode 100644 docs/som/nx/nx5/getting-started/install-system/emmc-system/install-rkdevtool.md create mode 100644 docs/som/nx/nx5/getting-started/install-system/microsd-system.md delete mode 100644 docs/som/nx/nx5/getting-started/preparation.md create mode 100644 docs/som/nx/nx5/getting-started/quickly-start.md create mode 100644 docs/som/nx/nx5/hardware-use/README.md rename docs/som/nx/nx5/{hardware/hw-interface.md => hardware-use/gpio.md} (83%) create mode 100644 docs/som/nx/nx5/hardware-use/hardware-info.md delete mode 100644 docs/som/nx/nx5/hardware/README.md delete mode 100644 docs/som/nx/nx5/hardware/hw-revision.md create mode 100644 docs/som/nx/nx5/low-level-dev/README.md create mode 100644 docs/som/nx/nx5/low-level-dev/kernel.md rename docs/som/nx/nx5/{radxa-os => }/low-level-dev/rsdk.md (50%) create mode 100644 docs/som/nx/nx5/low-level-dev/u-boot.md delete mode 100644 docs/som/nx/nx5/radxa-os/README.md delete mode 100644 docs/som/nx/nx5/radxa-os/ap.md delete mode 100644 docs/som/nx/nx5/radxa-os/app-dev/README.md delete mode 100644 docs/som/nx/nx5/radxa-os/app-dev/ai/README.md delete mode 100644 docs/som/nx/nx5/radxa-os/app-dev/ai/clip.md delete mode 100644 docs/som/nx/nx5/radxa-os/app-dev/ai/deeplabv3.md delete mode 100644 docs/som/nx/nx5/radxa-os/app-dev/ai/lprnet.md delete mode 100644 docs/som/nx/nx5/radxa-os/app-dev/ai/mobilenet.md delete mode 100644 docs/som/nx/nx5/radxa-os/app-dev/ai/mobilesam.md delete mode 100644 docs/som/nx/nx5/radxa-os/app-dev/ai/ppocr.md delete mode 100644 docs/som/nx/nx5/radxa-os/app-dev/ai/ppyoloe.md delete mode 100644 docs/som/nx/nx5/radxa-os/app-dev/ai/resnet.md delete mode 100644 docs/som/nx/nx5/radxa-os/app-dev/ai/retinaface.md delete mode 100644 docs/som/nx/nx5/radxa-os/app-dev/ai/rkllm-deepseek-r1.md delete mode 100644 docs/som/nx/nx5/radxa-os/app-dev/ai/rkllm-install.md delete mode 100644 docs/som/nx/nx5/radxa-os/app-dev/ai/rkllm-qwen2-vl.md delete mode 100644 docs/som/nx/nx5/radxa-os/app-dev/ai/rkllm-smolvlm2.md delete mode 100644 docs/som/nx/nx5/radxa-os/app-dev/ai/rkllm-usage.md delete mode 100644 docs/som/nx/nx5/radxa-os/app-dev/ai/rknn-custom-yolo.md delete mode 100644 docs/som/nx/nx5/radxa-os/app-dev/ai/rknn-install.md delete mode 100644 docs/som/nx/nx5/radxa-os/app-dev/ai/rknn-model-zoo.md delete mode 100644 docs/som/nx/nx5/radxa-os/app-dev/ai/rknn-quick-start.md delete mode 100644 docs/som/nx/nx5/radxa-os/app-dev/ai/rknn-stable-diffusion.md delete mode 100644 docs/som/nx/nx5/radxa-os/app-dev/ai/rknn-toolkit-lite2-yolov5.md delete mode 100644 docs/som/nx/nx5/radxa-os/app-dev/ai/rknn-toolkit-lite2-yolov8.md delete mode 100644 docs/som/nx/nx5/radxa-os/app-dev/ai/rknn-toolkit2-pc.md delete mode 100644 docs/som/nx/nx5/radxa-os/app-dev/ai/rknn-ultralytics.md delete mode 100644 docs/som/nx/nx5/radxa-os/app-dev/ai/wav2vec2.md delete mode 100644 docs/som/nx/nx5/radxa-os/app-dev/ai/whisper.md delete mode 100644 docs/som/nx/nx5/radxa-os/app-dev/ai/yolo-world.md delete mode 100644 docs/som/nx/nx5/radxa-os/app-dev/ai/yolov8-multi-stream.md delete mode 100644 docs/som/nx/nx5/radxa-os/app-dev/ai/yolov8-seg.md delete mode 100644 docs/som/nx/nx5/radxa-os/app-dev/ai/yolov8.md delete mode 100644 docs/som/nx/nx5/radxa-os/app-dev/mraa.md delete mode 100644 docs/som/nx/nx5/radxa-os/app-dev/venv_usage.md delete mode 100644 docs/som/nx/nx5/radxa-os/apps-deploy/README.md delete mode 100644 docs/som/nx/nx5/radxa-os/apps-deploy/docker.md delete mode 100644 docs/som/nx/nx5/radxa-os/apps-deploy/samba.md delete mode 100644 docs/som/nx/nx5/radxa-os/fcitx-usage.md delete mode 100644 docs/som/nx/nx5/radxa-os/install-os.mdx delete mode 100644 docs/som/nx/nx5/radxa-os/low-level-dev/README.md delete mode 100644 docs/som/nx/nx5/radxa-os/low-level-dev/kernel.md delete mode 100644 docs/som/nx/nx5/radxa-os/low-level-dev/rk_anti_copy_board.md delete mode 100644 docs/som/nx/nx5/radxa-os/low-level-dev/rkdeveloptool.md delete mode 100644 docs/som/nx/nx5/radxa-os/low-level-dev/rkdevtool.md delete mode 100644 docs/som/nx/nx5/radxa-os/low-level-dev/serial.md delete mode 100644 docs/som/nx/nx5/radxa-os/low-level-dev/u-boot.md delete mode 100644 docs/som/nx/nx5/radxa-os/low-level-dev/upgrade-tool.md delete mode 100644 docs/som/nx/nx5/radxa-os/mali-gpu.md delete mode 100644 docs/som/nx/nx5/radxa-os/os-usage/README.md delete mode 100644 docs/som/nx/nx5/radxa-os/sys-config/README.md delete mode 100644 docs/som/nx/nx5/radxa-os/sys-config/bootparam.md delete mode 100644 docs/som/nx/nx5/radxa-os/sys-config/rsetup.md delete mode 100644 docs/som/nx/nx5/radxa-os/wayland.md create mode 100644 docs/som/nx/nx5/system-use/README.md create mode 100644 docs/som/nx/nx5/system-use/appuse.md create mode 100644 docs/som/nx/nx5/system-use/audio.md create mode 100644 docs/som/nx/nx5/system-use/autologin.md create mode 100644 docs/som/nx/nx5/system-use/back-system.md create mode 100644 docs/som/nx/nx5/system-use/blue.md create mode 100644 docs/som/nx/nx5/system-use/chineseenv.md create mode 100644 docs/som/nx/nx5/system-use/eth.md create mode 100644 docs/som/nx/nx5/system-use/rsetup.md create mode 100644 docs/som/nx/nx5/system-use/ssh.md create mode 100644 docs/som/nx/nx5/system-use/uart.md create mode 100644 docs/som/nx/nx5/system-use/vnc.md create mode 100644 docs/som/nx/nx5/system-use/wifi.md create mode 100644 static/img/common/tools/rkdevtool/maskrom-nx5.webp create mode 100644 static/img/nx5/maskrom-nx5.webp create mode 100644 static/img/nx5/radxa-nx5-boot-system.webp create mode 100644 static/img/nx5/radxa-nx5-dev-kit-view.webp create mode 100644 static/img/nx5/radxa-nx5-devkit-interface.webp create mode 100644 static/img/nx5/radxa-nx5-emmc-boot-system.webp create mode 100644 static/img/nx5/radxa-nx5-interface.webp create mode 100644 static/img/nx5/radxa-nx5-io-board-interface.webp create mode 100644 static/img/nx5/radxa-nx5-io-board-view.webp create mode 100644 static/img/nx5/radxa-nx5-login.webp create mode 100644 static/img/nx5/radxa-nx5-microsd-boot-system.webp create mode 100644 static/img/nx5/radxa-nx5-uart.webp create mode 100644 static/img/nx5/radxa-nx5-view.webp create mode 100644 static/img/nx5/rk3588s_block_diagram.webp diff --git a/docs/common/dev/_rsdk.mdx b/docs/common/dev/_rsdk.mdx index 571cf3984..46475cb47 100644 --- a/docs/common/dev/_rsdk.mdx +++ b/docs/common/dev/_rsdk.mdx @@ -13,6 +13,7 @@ 1. 首先，请安装所需的依赖项： + ```bash sudo apt-get update sudo apt-get install git qemu-user-static binfmt-support @@ -25,6 +26,7 @@ sudo usermod -a -G docker $USER 2. 使用以下命令克隆项目并安装 DevContainer： + ```bash git clone --recurse-submodules https://github.com/RadxaOS-SDK/rsdk.git cd rsdk @@ -39,6 +41,7 @@ rsdk devcon 当终端出现以下所示，表明现在处于 rsdk 的 dev 容器 shell 中 + ```bash ██████╗ ███████╗██████╗ ██╗ ██╗ ██╔══██╗██╔════╝██╔══██╗██║ ██╔╝ @@ -61,12 +64,10 @@ direnv: export +AR +AS +CC +CONFIG_SHELL +CXX +DETERMINISTIC_BUILD +DEVENV_DOTFI vscode ➜ /workspaces/rsdk (main) $ -```` +``` - - 仓库详细使用，请参考 [rsdk](https://radxaos-sdk.github.io/rsdk/) 页面。 如需要在 `rsdk` 基础上进行二次开发，则请继续阅读文档 [Build customization](https://radxaos-sdk.github.io/rsdk/tutorials/customize.html)。 @@ -83,7 +84,7 @@ vscode ➜ /workspaces/rsdk (main) $ git clone --recurse-submodules https://github.com/RadxaOS-SDK/rsdk.git cd rsdk -```` +``` @@ -119,43 +120,45 @@ sudo apt-get update git clone https://gitcode.com/radxaos-sdk/rsdk.git sudo tee /etc/apt/sources.list.d/70-radxa.list <<< "deb [trusted=yes] https://mirrors.sdu.edu.cn/radxa-repo/bookworm/ bookworm main" -```` +``` ::: 2. 安装构建相关依赖并准备构建环境： + ```bash sudo apt-get update sudo apt-get install devscripts dpkg-dev build-essential sudo apt build-dep . -```` +``` - 3. 构建 deb 包： + ```bash dpkg-buildpackage -us -uc -b -```` +``` 4. 构建成功后，生成的 deb 包位于上级目录（..），可通过以下命令安装： + ```bash sudo apt install ../rsdk\_\*.deb -```` +``` @@ -172,6 +175,7 @@ sudo apt install ../rsdk\_\*.deb - 在下面的示例中，我们选择 **Build system image**： + ```bash ┌─────────────────┤ RSDK ├──────────────────┐ │ Please select a task: │ @@ -183,7 +187,7 @@ sudo apt install ../rsdk\_\*.deb │ │ │ │ └───────────────────────────────────────────┘ -```` +``` @@ -196,7 +200,10 @@ sudo apt install ../rsdk\_\*.deb ::: +以 rock-5b 为例： + + ```bash ┌─────────────────┤ RSDK ├──────────────────┐ │ Please select a product: │ @@ -223,6 +230,7 @@ sudo apt install ../rsdk\_\*.deb 示例：选择 Radxa APT 镜像： + ```bash ┌─────────────────┤ RSDK ├──────────────────┐ │ Select Radxa APT mirror (radxa-deb): │ @@ -245,6 +253,7 @@ sudo apt install ../rsdk\_\*.deb 然后可以选择可选的 Debian/Ubuntu 镜像（或保留默认）： + ```bash ┌─────────────────┤ RSDK ├──────────────────┐ │ Select Debian/Ubuntu mirror (optional): │ @@ -268,6 +277,7 @@ sudo apt install ../rsdk\_\*.deb 确认并开始构建：在镜像配置（如果有）完成后，向导会展示所选产品和镜像的汇总（对应于将要执行的最终 CLI 命令），请仔细检查摘要并选择 **Yes** 开始构建，或选择 **No** 返回修改： + ```bash ┌─────────────────┤ RSDK ├──────────────────┐ │ │ @@ -291,12 +301,13 @@ sudo apt install ../rsdk\_\*.deb 编译结束之后会生成一个 `out` 目录，`output.img` 即最终生成的镜像： + ```bash vscode ➜ /workspaces/rsdk (main) $ ls out/rock-5b_bookworm_kde/ build-image config.yaml debs manifest output.img rootfs.tar seed.tar.xz -```` +``` diff --git a/docs/common/dev/_u-boot.mdx b/docs/common/dev/_u-boot.mdx index a0fd7f660..e7f8c1e12 100644 --- a/docs/common/dev/_u-boot.mdx +++ b/docs/common/dev/_u-boot.mdx @@ -75,7 +75,7 @@ cd bsp ::: -然后将产品对应 `profile`: `rk2410` 填入 `bsp` 命令的 `profile` 参数即可拉取与配置代码，例如： +然后将产品对应 `profile`: `rk2410` 填入 `bsp` 命令的 `profile` 参数即可拉取与配置代码，例如：以 rock-5b 为例 ```bash ./bsp u-boot rk2410 rock-5b --no-build diff --git a/docs/common/radxa-os/rkdevtool/_use.mdx b/docs/common/radxa-os/rkdevtool/_use.mdx index 9a82ddd27..73aea7aae 100644 --- a/docs/common/radxa-os/rkdevtool/_use.mdx +++ b/docs/common/radxa-os/rkdevtool/_use.mdx @@ -99,7 +99,7 @@ brew install rkdeveloptool -:::details 从源码编译（备选） +:::tip 从源码编译（备选） 如果 Tap 安装失败，也可以从源码编译。macOS 不支持 `$(nproc)`，请使用 `make` 直接编译。`main.cpp` 中使用了可变长度数组（VLA），macOS 的 Clang 默认不允许在 C++ 中使用 VLA，需要先将变量声明为 `const`。 diff --git a/docs/common/radxa-os/system-config-debian12/_vnc.mdx b/docs/common/radxa-os/system-config-debian12/_vnc.mdx index ac87c3251..4ce6debfd 100644 --- a/docs/common/radxa-os/system-config-debian12/_vnc.mdx +++ b/docs/common/radxa-os/system-config-debian12/_vnc.mdx @@ -3,7 +3,7 @@ VNC 远程需要双方设备处于同一局域网下，且目标设备需要开启 VNC 服务。 :::tip 使用说明 -VNC 远程控制适合带有图形界面的系统，若系统没有图形化桌面，推荐使用 SSH 远程控制。 +VNC 远程控制适合带有图形界面的系统且没有外接显示器的情况，若系统没有图形化桌面，推荐使用 SSH 远程控制。 ::: ## 使用 VNC(远程设备) diff --git a/docs/som/nx/nx5/README.md b/docs/som/nx/nx5/README.md index a00863af3..f3209ac0f 100644 --- a/docs/som/nx/nx5/README.md +++ b/docs/som/nx/nx5/README.md @@ -1,81 +1,135 @@ --- -sidebar_position: 4 +sidebar_position: 3 --- # 瑞莎 NX5 ## 产品介绍 - - +瑞莎 NX5 是一款基于瑞芯微 RK3588S 的高性能核心模组，集成了 4 核 Cortex-A76 + 4 核 Cortex-A55 CPU、ARM Mali-G610 MP4 GPU 和 6 TOPS@INT8 NPU，支持主流深度学习框架。提供丰富的接口和扩展能力，支持 8K 视频编解码，适用于边缘计算、机器视觉、智能终端、多媒体处理等应用场景。 -#### 实物照片 +瑞莎 NX5 可搭配官方载板快速实现功能验证与原型搭建，方便用户在短时间内完成上电调试、接口评估及应用开发。 -- Radxa NX5 - ![Radxa NX5](/img/nx5/nx5-overview.webp) +## 产品实物 -#### 特性 + -| Features | Description | -| -------- | ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------- | -| SoC | Rockchip RK3588S | -| CPU | Quad Cortex®‑A76 @ 2.2~2.4GHz and a quad Cortex®‑A55 @ 1.8GHz
based on Arm® DynamIQ™ configuration | -| GPU | Arm Mali™ G610MP4 GPU ‑ OpenGL® ES1.1, ES2.0, and ES3.2 ‑ OpenCL®
1.1, 1.2 and 2.2 ‑ Vulkan® 1.1 and 1.2 ‑ Embedded high performance 2D
image acceleration module | -| NPU | NPU supporting INT4 / INT8 / INT16 / FP16 / BF16 and TF32 acceleration
and computing power is up to 6TOPs | -| Memory | 1GB, 2GB, 4GB, 8GB or 16GB LPDDR4X (depending on SKU) | -| Storage | Optional 4GB / 8GB / 16GB / 32GB, up to 512GB Onboard eMMC Compatible with eMMC 5.1
Supports SDMMC interface for data storage and OS booting using
SD cards | + + +
+ +
+ + + + + +瑞莎 NX5 载板集成了丰富的外部接口，可用于快速验证瑞莎 NX5 核心模组的功能，帮助用户轻松完成上电调试、接口评估及初步的应用开发评估。 + +
+ +
+ + + + + +瑞莎 NX5 开发套件由瑞莎 NX5 核心模组、瑞莎 NX5 载板组成，提供了完整的硬件开发平台，可用于快速验证核心板功能、评估性能并搭建原型系统，帮助用户高效完成开发与方案验证。 + +
+ +
 - + -#### 实物照片 +## 产品规格 + +| 产品型号 | 瑞莎 NX5 | +| --------------------- | ------------------------------------------------------------------------------------------------------------------------------------------------------------ | +| SoC（主控） | 瑞芯微 RK3588S | +| CPU（中央处理器） | 4 核 Cortex-A76 + 4 核 Cortex-A55 | +| GPU（图形处理器） | ARM Mali-G610 MP4
- 支持 OpenGL ES 1.1, 2.0 and 3.2, OpenCL 1.1, 1.3 and 2.2, Vulkan 1.1 and 1.2
- 内嵌高性能2D图像加速模块 | +| NPU（神经网络处理器） | 6 TOPS@INT8
- 支持 INT4 / INT8 / INT16 / FP16 / BF16 / TF32 等计算精度
- 支持 TensorFlow, Caffe, Tflite, Pytorch, Onnx NN, Android NN 等深度学习框架 | +| 内存 | LPDDR4X
- 容量：最高可选 16GB | +| 视频编解码 | 视频编码
- 最高支持 8K@30fps 的 H.265 / H.264 视频编码
视频解码
- 最高支持 8K@60fps 的 AV1 / AVS2 / VP9 / H.265 / H.264 视频解码 | +| 存储 | 可选板载 eMMC
- eMMC 5.1, 最大可选 512GB
板载 SPI Flash（可选）
1x SDMMC | +| 网络 | 1x 千兆以太网 | +| 显示 | 1x HDMI TX
- 最高支持 8K@60Hz
1x eDP TX
- 最高支持 4K@60Hz
1x DP TX
- 最高支持 8K@30Hz
1x MIPI DSI（2 通道） | +| 摄像头 | 2x MIPI CSI（2 通道）或 1x MIPI CSI（4 通道）
1x MIPI CSI（4 通道）
1x MIPI CSI（2 通道） | +| USB | USB 3.1 Gen1
USB 2.0 | +| PCIe | PCIe2.0 | +| 其它接口 | 支持 UART, I2C, I2S, CAN, PWM, GPIOs 等功能 | +| 连接器 | 260-pin SO-DIMM 连接器 | +| 操作系统 | 支持 Debian, Yocto, Buildroot, Android 14 | +| 机械尺寸 | 70 毫米 x 45 毫米 | + +## 接口说明 + + + + + +
+ +
+ +| 序号 | 说明 | 序号 | 说明 | 序号 | 说明 | +| :--: | :-------------- | :--: | :------------- | :--: | :-------- | +| 1 | LPDDR4X | 2 | 瑞芯微 RK3588S | 3 | 板载 eMMC | +| 4 | 260-pin SO-DIMM | 5 | SPI Flash | | | + + -- Radxa NX5-IO - ![Radxa NX5 IO](/img/nx5/nx5-io/nx5-io-overview.webp) + + +
+ +
+ +| 序号 | 说明 | 序号 | 说明 | 序号 | 说明 | +| :--: | :--------------------- | :--: | :----------------------------- | :--: | :------------------------- | +| 1 | 2x USB 3.1 Gen1 Type-A | 2 | 上：DP 输出
下：HDMI 输出 | 3 | DC5525 供电接口（5V 输入） | +| 4 | 风扇接口 | 5 | MIPI 摄像头接口 | 6 | MIPI 摄像头接口 | +| 7 | 电源按键 | 8 | Maskrom 按键 | 9 | microSD 卡槽 | +| 10 | M.2 E Key 2230 插槽 | 11 | 40-Pin GPIO 排针 | 12 | 260-pin SO-DIMM 插槽 | +| 13 | micro USB 接口（OTG） | 14 | 千兆以太网接口 | 15 | 2x USB 3.1 Gen1 Type-A | + + -- Radxa NX5 + NX5-IO - Radxa NX5 + IO + -#### 外设概述 +
+ 瑞莎 NX5 开发套件接口图 +
-- 4x USB3.0 Host -- 1x Micro USB 2.0 OTG -- 2x MIPI CSI -- 1x M.2 E Key -- 1x TF Card Slot -- 1x DP -- 1x HDMI -- 1x Gigabit Ethernet -- 1x 40 PIN IO -- 1x Fan Header -- 2x LED Light -- 1x Power Input -- 1x Maskrom Key -- 1x Power Key +| 序号 | 说明 | 序号 | 说明 | +| :--: | :------------ | :--: | :------- | +| 1 | 瑞莎 NX5 载板 | 2 | 瑞莎 NX5 | -### 芯片框图 +## 应用场景 -### 系统框图 +### 边缘计算与智能网关 -## 文档使用指引 +依托 6 TOPS NPU 与千兆以太网，无需依赖云端即可在本地完成视频分析、目标检测、人脸识别等 AI 推理任务，实现边缘侧智能决策与数据预处理，大幅降低网络带宽与云端算力压力。 -### [快速上手](/compute-module/nx5/getting-started) +### 机器视觉与工业自动化 -介绍系统烧录，系统登录，配件使用等内容让用户能快速的上手使用。 +可用于视觉检测、识别与测量等机器视觉场景，支持 CAN 总线等工业接口，可与现场总线、工业控制设备协同工作，构建柔性生产线、自动检测工站和智能设备。 -### [Radxa OS](/compute-module/nx5/radxa-os) +### 多媒体处理与智能显示 -### [Android](/compute-module/nx5/android) +支持 8K@60fps 视频解码和 8K@30fps 视频编码，适用于数字标牌、视频监控、视频会议、智能广告机、信息查询终端、自助设备、智慧零售终端等多媒体应用，通过高分辨率显示与本地智能分析，实现更丰富的人机交互体验。 -### [硬件开发](/compute-module/nx5/hardware) +### 服务与移动机器人 -介绍硬件信息，例如硬件接口，支持的配件等。 +8 核 CPU 配合 NPU 组合，具备各类传感器扩展接口以及有线网络能力，可作为移动机器人或协作机器人主控平台，用于路径规划、环境感知、目标跟踪以及远程运维与状态监控等应用。 -### [配件](/compute-module/nx5/accessories) +### 教育培训与研发验证 -介绍支持的配件型号及使用说明。 +适用于高校与培训机构的嵌入式与 AI 教学实践平台，也适合作为企业方案原型开发与功能验证的基础硬件平台，加速从概念设计到产品落地的过程。 diff --git a/docs/som/nx/nx5/accessories/README.md b/docs/som/nx/nx5/accessories/README.md deleted file mode 100644 index 5a417728e..000000000 --- a/docs/som/nx/nx5/accessories/README.md +++ /dev/null @@ -1,7 +0,0 @@ ---- -sidebar_position: 5 ---- - -# 配件 - - diff --git a/docs/som/nx/nx5/accessories/camera.md b/docs/som/nx/nx5/accessories/camera.md deleted file mode 100644 index 65e9a661c..000000000 --- a/docs/som/nx/nx5/accessories/camera.md +++ /dev/null @@ -1,66 +0,0 @@ ---- -sidebar_position: 4 ---- - -# 摄像头 - -目前支持以下3款摄像头产品： - -1. OKDO 5MP Camera (ov5647) -2. Raspberry Camera v1.3 (ov5647) -3. Raspberry Camera v2 (imx219) - -以下采用 'Raspberry Camera v2' 演示操作的流程,其他摄像头类似。 - -## 配置 - -- 准备好 raspberry camera v2，通过 FPC 线接上 NX5 IO 的 CSI 接口。 - -- 打开终端运行 `sudo rsetup` 命令： - -```bash -radxa@radxa-nx5-io:~$ sudo rsetup -``` - -- 通过[设备树配置](../radxa-os/sys-config/rsetup#overlays)来启用摄像头的 overlay。 - -:::caution [注意] - -1. 请启用 `[] Enable Raspberry Pi Camera v2 on CAM0` 项 overlay。 -2. 在启用成功显示 `[*] Enable Raspberry Pi Camera v2 on CAM0` 回车键确认后退出重启才能使配置生效。 -3. 其他产品请根据描述开启相应的overlay。 - -::: - -## 图像预览 - -摄像头的实时预览推荐使用 cheese，运行以下命令安装 cheese： - -```bash -sudo apt update -sudo apt install cheese -``` - -进入桌面后打开终端执行以下命令即可开始实施预览摄像头： - -```bash -sudo cheese -``` - -你也可以使用终端命令打开相机预览: - -```bash -gst-launch-1.0 v4l2src device=/dev/video11 io-mode=4 ! videoconvert ! video/x-raw,format=NV12,width=1920,height=1080 ! xvimagesink -``` - -使用以下命令拍照: - -```bash -gst-launch-1.0 v4l2src device=/dev/video11 io-mode=4 ! videoconvert ! video/x-raw,format=NV12,width=1920,height=1080 ! jpegenc ! multifilesink location=file.name.jpg -``` - -使用以下命令拍摄视频: - -```bash -gst-launch-1.0 v4l2src num-buffers=512 device=/dev/video11 io-mode=4 ! videoconvert ! video/x-raw, format=NV12, width=1920, height=1080, framerate=30/1 ! tee name=t ! queue ! mpph264enc ! queue ! h264parse ! mpegtsmux ! filesink location=/home/radxa/file.name.mp4 -``` diff --git a/docs/som/nx/nx5/accessories/pd-30w.md b/docs/som/nx/nx5/accessories/pd-30w.md deleted file mode 100644 index bfe212f80..000000000 --- a/docs/som/nx/nx5/accessories/pd-30w.md +++ /dev/null @@ -1,9 +0,0 @@ -# Radxa Power PD 30W - -Radxa NX5-IO 仅支持 5V DC 供电(接口规格：DC 5525)，建议电流 3A 及以上。 - -推荐使用我们的 [Radxa Power PD 30W](https://radxa.com/products/accessories/power-pd-30w) 电源适配器搭配 [Type-C 转 DC 口数据线](https://arace.tech/products/radxa-type-c-to-dc-5v-cable) 使用。 - -
- -
diff --git a/docs/som/nx/nx5/accessories/wifi_bt_access.md b/docs/som/nx/nx5/accessories/wifi_bt_access.md deleted file mode 100644 index 7525ae753..000000000 --- a/docs/som/nx/nx5/accessories/wifi_bt_access.md +++ /dev/null @@ -1,47 +0,0 @@ ---- -sidebar_position: 2 ---- - -# WIFI & BT - -## WIFI & BT 支持模块列表 - -| NO. | Model | Chip | WiFi | BT | WIFI Throughput | Remark | -| --- | ---------------------- | ----------- | ------------- | --- | ------------------------------------- | ------ | -| 1 | Radxa wireless A8 | RTL8852BE | 2.4G&5G&WIFI6 | 5.0 | up:600Mbits/sec down:900 Mbits/sec | | -| 2 | Intel AX210 (PCIE+USB) | Intel AX210 | WiFi 6 | 5.2 | up: 859 Mbits/sec down: 813 Mbits/sec | | - -- Radxa NX5 IO 没有板载WiFi/BT模块，需要外接模块。以上是支持并测试过的 WITI/BT 卡。 -- 这里演示的 M.2 无线模块是： Radxa 无线模块 A8。 - -[Radxa 无线模块A8](/zh/img/accessories/network/a8-module-01.webp) - -- 安装如图所示： - -[Radxa 无线模块A8](/zh/img/accessories/network/a8-module-02.webp) - -## WIFI 使用 - -1. 首先进入ROOT用户模式。 - -```bash -sudo su -``` - -2. 打开WIFI - -```bash -nmcli r wifi on -``` - -3. 扫描WIFI - -```bash -nmcli dev wifi -``` - -4. 连接wifi网络 - -```bash -nmcli dev wifi connect "wifi_name" password "wifi_password" -``` diff --git a/docs/som/nx/nx5/android/README.md b/docs/som/nx/nx5/android/README.md deleted file mode 100644 index 31c332227..000000000 --- a/docs/som/nx/nx5/android/README.md +++ /dev/null @@ -1,9 +0,0 @@ ---- -sidebar_position: 3 ---- - -# Android 系统 - -主要介绍系统如何使用 - - diff --git a/docs/som/nx/nx5/android/app-dev.md b/docs/som/nx/nx5/android/app-dev.md deleted file mode 100644 index 4e7b46df4..000000000 --- a/docs/som/nx/nx5/android/app-dev.md +++ /dev/null @@ -1,5 +0,0 @@ ---- -sidebar_position: 5 ---- - -# 应用开发 diff --git a/docs/som/nx/nx5/android/install-os.mdx b/docs/som/nx/nx5/android/install-os.mdx deleted file mode 100644 index 434e514b1..000000000 --- a/docs/som/nx/nx5/android/install-os.mdx +++ /dev/null @@ -1,112 +0,0 @@ ---- -sidebar_position: 2 -title: 系统安装 ---- - -本文档将介绍如何把 Android 镜像安装到 Radxa NX5。 - -NX5 可以从 microSD 卡启动，也可以从板载 EMMC 启动，基于不同的启动方式，安装系统到不同的介质上. - - - - - -## 准备工作 - -### 准备安装介质 - -- microSD 卡 (建议class10等级以上) - -- USB 读卡器 - -### 镜像下载 - -请到 [资源下载汇总](../getting-started/download) 下载对应的镜像文件 - -:::tip 镜像说明 -下载的系统镜像为压缩格式，使用 Balena Etcher 进行镜像烧录前，需先完成解压操作。 -::: - -## 系统安装 - -1. 下载 [Etcher](https://etcher.balena.io/)。 - ![ROCK5A via Etcher 01](/img/rock5a/rock5a-etcher.webp) - -2. 打开 Etcher，将准备的操作系统镜像刷写到 microSD 卡。在 Etcher 窗口中，单击 `Flash from file` 选择刚下载的操作系统镜像。 - ![ROCK5A via Etcher 02](/img/rock5a/rock5a-etcher-1.webp) - -3. 在 Etcher 窗口中，点击 `Select target`。 - ![ROCK5A via Etcher 03](/img/rock5a/rock5a-etcher-2.webp) - -4. 在 Etcher 窗口中，点击 `Flash!` 然后等待刷写进度条。 - ![ROCK5A via Etcher 04](/img/rock5a/rock5a-etcher-3.webp) - -5. 在 Etcher 窗口中，当刷写成功时将会显示 `Flash Complete!` - ![ROCK5A via Etcher 05](/img/rock5a/rock5a-etcher-4.webp) - -## 系统启动 - -### 启动 NX5 Kit(NX5 + NX5 IO) - -1. 插入安装好操作系统的microSD卡 -2. 通过适配器为 NX5 Kit 供电 -3. NX5 Kit 将在绿色电源 LED 亮起的情况下启动 - - - - - -## 准备工作 - -### 准备安装介质 - -- micro usb 转 typea usb 接口线缆 - -### 镜像下载 - -请到 [资源下载汇总](../getting-started/download) 下载对应的镜像文件 - -## 系统安装 - -### 系统安装 - -1. 将micro usb 线缆连接到主机 - -2. 按住 maskrom 按键后上电，此时会进入 maskrom 模式 - - - - - -#### Linux/Mac 系统使用 rkdeveloptool 写入 - - [rkdeveloptool](../radxa-os/low-level-dev/rkdeveloptool) - - [upgrade_tool](../radxa-os/low-level-dev/upgrade-tool)（可同时烧录多台设备） - - - - - -#### Windows 系统使用 rkdevetool 写入 - - [rkdevtool](../radxa-os/low-level-dev/rkdevtool) - - - - - -## 系统启动 - -### 启动 NX5 Kit(NX5 + NX5 IO) - -1. 通过适配器为 NX5 Kit 供电 -2. NX5 Kit 将在绿色电源 LED 亮起的情况下启动 - - - - - -## 常见问题 - -## 参考文档 diff --git a/docs/som/nx/nx5/android/low-level-dev.md b/docs/som/nx/nx5/android/low-level-dev.md deleted file mode 100644 index bd2ca5b05..000000000 --- a/docs/som/nx/nx5/android/low-level-dev.md +++ /dev/null @@ -1,69 +0,0 @@ ---- -sidebar_position: 4 ---- - -# 底层开发 - -主要介绍 uboot, kernel, aosp 编译打包等内容 - -## 环境配置 - -建议使用 Ubuntu 20.04 及以上版本 - -## 源码下载 - -```bash - -$ repo init -u https://github.com/radxa/manifests.git -b Android12_Radxa_rk14 -m rockchip-s-release.xml -$ repo sync -d -c -j4 - -``` - -## 镜像编译 - -### 全部编译 - -适合第一次编译 - -```bash -android12 $ source build/envsetup.sh -android12 $ lunch RadxaRockNX5-userdebug -android12 $ ./build.sh -AUCKup -``` - -等待编译完成就可以在 IMAGE 目录找到镜像 - -### 单独编译 - -适合小修改后编译 - -例如，只修改过 - -U-boot - -```bash -radxa:rock-android12 $ source build/envsetup.sh -radxa:rock-android12 $ lunch RadxaRockNX5-userdebug -radxa:rock-android12 $ ./build.sh -AUup - -``` - -Kernel - -```bash -radxa:rock-android12 $ source build/envsetup.sh -radxa:rock-android12 $ lunch RadxaRocRadxaRockNX5k5B-userdebug -radxa:rock-android12 $ ./build.sh -ACKup -``` - -AOSP - -```bash -radxa:rock-android12 $ source build/envsetup.sh -radxa:rock-android12 $ lunch RadxaRockNX5-userdebug -radxa:rock-android12 $ ./build.sh -Aup -``` - -等待编译完成就可以在 IMAGE 目录找到镜像 - -## 常见问题 diff --git a/docs/som/nx/nx5/android/remote-login.md b/docs/som/nx/nx5/android/remote-login.md deleted file mode 100644 index 332a16632..000000000 --- a/docs/som/nx/nx5/android/remote-login.md +++ /dev/null @@ -1,128 +0,0 @@ ---- -sidebar_position: 3 ---- - -import Serial from "../../../../common/general/\_serial.mdx" - -# 远程登录 - -本章节旨在向需要通过个人电脑（PC）远程访问 SBC 的用户介绍如何通过串口、adb 等方式进行远程登录 - - - - - - - - - - - -### 准备工作 - -adb（调试桥）安装： - - - - - -从Android[官方网站](https://source.android.com/docs/setup/build/adb)下载Windows版本的adb工具包，下载解压后需要配置环境变量: - -方式一：在终端窗口输入以下命令： - -```bash - -set HTTP_PROXY=myserver:1981 - -``` - -方式二：打开系统设置，修改环境变量：![NX5 adb](/img/nx5/adb_config.webp) - - - - - -使用以下命令安装即可： - -```bash - -sudo apt install adb - -``` - - - - - -从Android[官方网站](https://source.android.com/docs/setup/build/adb)下载Mac版本的adb工具包，下载解压后需要配置环境变量: -打开终端输入一下命令进行环境变量配置： - -```bash - -export PATH=${path}:~/platform-tools('~'代表解压出来的工具包路径) - -``` - - - - - - - - - -#### 要求 - -1. 一条USB 线 -2. 一台有安装 ADB 工具的电脑或笔记本 -3. 一个 Radxa NX5 - -#### 步骤 - -1. 用 USB 线连接计算机的 USB 接口和 Radxa NX5 的 OTG Type C 接口 -2. 打开计算机终端输入 adb devices 确认识别到 Radxa NX5 ,输入 adb shell 登录 - -```bash - -$ adb devices - List of devices attached - f94f8e0d28380ceb device - -$ adb shell - RadxaRockNX5:/ $ - -``` - - - - - -Android 11 版本以后支持无线 ADB 。 - -#### 要求 - -1. 一台有安装 ADB 工具的电脑或笔记本 ，ADB 版本需要大于 31.0.0 -2. 一个Radxa nx5，安卓镜像需要大于或等于 11 -3. 计算机和 Radxa NX5 需要在同一个局域网 - -#### 步骤 - -1. 启动 Radxa NX5 ，使用 wifi 连接 网络 -2. 进入开发着模式，点击7次版本号可进入开发着模式（设置 -> 关于平板电脑 -> 版本号） -3. 进入开发着选项（设置 -> 系统 -> 开发着选项），打开无线调试，记住IP地址和接(例：10.0.0.16:45613) -4. 打开计算机终端输入 adb connect 10.0.0.16:45613 连接 Radxa NX5 ，输入 adb shell 登录 - -```bash -$ adb connect 10.0.0.16:45613 - -$ adb shell - RadxaRockNX5:/ $ -``` - - - - - - - - diff --git a/docs/som/nx/nx5/android/system-config.md b/docs/som/nx/nx5/android/system-config.md deleted file mode 100644 index c9a5b4543..000000000 --- a/docs/som/nx/nx5/android/system-config.md +++ /dev/null @@ -1,5 +0,0 @@ ---- -sidebar_position: 6 ---- - -# 系统配置 diff --git a/docs/som/nx/nx5/download.md b/docs/som/nx/nx5/download.md new file mode 100644 index 000000000..718c9f817 --- /dev/null +++ b/docs/som/nx/nx5/download.md @@ -0,0 +1,53 @@ +--- +sidebar_position: 150 +--- + +# 资源汇总下载 + +## 刷机工具 + +- [Balena Etcher](https://etcher.balena.io/) + +- [DriverAssistant v5.14](https://dl.radxa.com/tools/windows/DriverAssitant_v5.14.zip) + +- [RKDevTool](https://dl.radxa.com/tools/windows/RKDevTool_Release_v2.96-20221121.rar) + +## Loader 文件 + +用于初始化 USB 下载。 + +- [rk3588_spl_loader.bin](https://dl.radxa.com/rock5/sw/images/loader/rock-5b/release/rk3588_spl_loader_v1.15.113.bin) + +## 系统镜像 + +### 瑞莎官方系统 + +:::info 最新系统镜像发布页面 + +- [瑞莎 NX5 载板系统镜像](https://github.com/radxa-build/radxa-nx5-io/releases/) + +该页面会发布最新的正式版本和测试版本的系统镜像，测试版本以 `t` 开头，正式版本以 `r` 开头（旧版本的正式版本以 `b` 开头）。 + +::: + +- [radxa-nx5-io_bookworm_kde_b2.output.img.xz](https://github.com/radxa-build/radxa-nx5-io/releases/download/rsdk-b2/radxa-nx5-io_bookworm_kde_b2.output.img.xz) + +### 安卓系统 + +- [Radxa-NX5-Android12-rkr14-20240326-update.zip](https://github.com/radxa/manifests/releases/download/radxa-nx5-android12-rkr14-20240326/Radxa-NX5-Android12-rkr14-20240326-update.zip) + +## 硬件设计 + +### 瑞莎 NX5 + +- [原理图 V1.1](https://dl.radxa.com/nx5/radxa_nx5_schematic_v1100.pdf) +- [位号图 V1.1](https://dl.radxa.com/nx5/radxa_nx5_components_placement_map_v1100.pdf) +- [引脚定义表 V1.1](https://dl.radxa.com/nx5/radxa_nx5_pinout_v1.1.xlsx) +- [2D DXF 文件 V1.1](https://dl.radxa.com/nx5/radxa_nx5_2d_dxf.zip) +- [3D STP 文件 V1.1](https://dl.radxa.com/nx5/radxa_nx5_v1.1_3d_stp.zip) + +### 瑞莎 NX5 载板 + +- [原理图 V1.4](https://dl.radxa.com/nx5/nx5-io-board/radxa_nx5_io_board_v1400_schematic.pdf) +- [位号图 V1.4](https://dl.radxa.com/nx5/nx5-io-board/radxa_nx5_io_board_v1400_components_placement_map.pdf) +- [设计参考资料](https://github.com/radxa/radxa-som-projects/tree/main/nx5/radxa-nx5-io-board) diff --git a/docs/som/nx/nx5/getting-started/README.md b/docs/som/nx/nx5/getting-started/README.md index 8d33dfa23..6e45f7b62 100644 --- a/docs/som/nx/nx5/getting-started/README.md +++ b/docs/som/nx/nx5/getting-started/README.md @@ -1,7 +1,7 @@ --- -sidebar_position: 1 +sidebar_position: 5 --- -# 快速上手 +# 上手指南 diff --git a/docs/som/nx/nx5/getting-started/accessory-usage.md b/docs/som/nx/nx5/getting-started/accessory-usage.md deleted file mode 100644 index f60dc3993..000000000 --- a/docs/som/nx/nx5/getting-started/accessory-usage.md +++ /dev/null @@ -1,61 +0,0 @@ ---- -sidebar_position: 3 ---- - -# 配件使用说明 - -主要介绍支持该产品的配件有哪些及介绍如何使用 - -## 接口总览 - -nx5_io_interface_overview - -## 摄像头 - -RADXA NX5 IO 带有两个 2-lane 的 CSI 接口。以下是目前支持的摄像头列表： - - - - - - - - - - - - - - - - - - - - - - -
Camera NameSensor 型号分辨率
OKDO 5MP CameraOV5647500万像素
Raspberry Pi Camera V1.3OV5647500万像素
Raspberry Pi Camera V2IMX219800万像素
- -更多相关信息请参考 [摄像头配件](../accessories/camera)。 - -## WIFI/BT - -RADXA NX5 IO 带有1个 M.2 Key, 以下是目前支持模组列表： - - - - - - - - - - - - - - -
模组名 描述
Radxa Wireless Module A8 Realtek RTL8852BE 的标准 M.2 2230 无线模块
AX210 Intel AX210 无线模块
- -更多相关信息请参考 [wifi/bt 配件](../accessories/wifi_bt_access)。 diff --git a/docs/som/nx/nx5/getting-started/download.md b/docs/som/nx/nx5/getting-started/download.md deleted file mode 100644 index 73a5bd992..000000000 --- a/docs/som/nx/nx5/getting-started/download.md +++ /dev/null @@ -1,43 +0,0 @@ ---- -sidebar_position: 4 ---- - -# 资源下载汇总 - -### 硬件设计 - -核心板和底板 - -[NX5 V1.1 原理图 pdf](https://dl.radxa.com/nx5/radxa_nx5_v1100_schematic.pdf) - -[NX5 V1.1 位号图 pdf](https://dl.radxa.com/nx5/radxa_nx5_v1100_smd.pdf) - -[NX5 V1.1 平面图 dxf](https://dl.radxa.com/nx5/nx5-io-board/radxa_nx5_v1100_2d.dxf) - -[NX5 IO V1.4 原理图 pdf](https://dl.radxa.com/nx5/nx5-io-board/radxa_nx5_io_board_v1400_schematic.pdf) - -[NX5 IO V1.4 位号图 pdf](https://dl.radxa.com/nx5/nx5-io-board/radxa_nx5_io_board_v1400_components_placement_map.pdf) - -[NX5 IO V1.4 平面图 dxf](https://dl.radxa.com/nx5/nx5-io-board/radxa_nx5_io_board_v1400_top_2d.dxf) - -[NX5 引脚定义 V1.1 xlsx](https://dl.radxa.com/nx5/radxa_nx5_pinout_v1.1.xlsx) - -[NX5 IO 板设计资料](https://github.com/radxa/radxa-cm-projects/tree/main/nx5/radxa-nx5-io-board) - -### 刷机工具 - -1. [Etcher](https://etcher.balena.io/#download-etcher/) -2. [rkdeveloptool 开源版本](https://opensource.rock-chips.com/wiki_Rkdeveloptool) -3. [RKDevTool v2.96](https://dl.radxa.com/tools/windows/RKDevTool_Release_v2.96_zh.zip) (含中文使用文档) -4. [DriverAssistant v5.14](https://dl.radxa.com/tools/windows/DriverAssitant_v5.14.zip)（相关驱动） - -### 操作系统镜像 - -- Radxa OS - - Radxa NX5 IO（6.1 内核）: [radxa-nx5-io_debian_bookworm_kde_b2.img.xz](https://github.com/radxa-build/radxa-nx5-io/releases/download/rsdk-b2/radxa-nx5-io_bookworm_kde_b2.output.img.xz) - -- Android - Radxa NX5 IO Adroid: [radxa nx5 android12 rkr14](https://github.com/radxa/manifests/releases/download/radxa-nx5-android12-rkr14-20240326/Radxa-NX5-Android12-rkr14-20240326-update.zip) - -### 质量认证 diff --git a/docs/som/nx/nx5/getting-started/install-os.mdx b/docs/som/nx/nx5/getting-started/install-os.mdx deleted file mode 100644 index 467bcc460..000000000 --- a/docs/som/nx/nx5/getting-started/install-os.mdx +++ /dev/null @@ -1,27 +0,0 @@ ---- -sidebar_position: 2 - -doc_kind: wrapper -source_of_truth: local -imports_resolve_to: - - docs/som/nx/nx5/radxa-os/install-os.mdx - - docs/som/nx/nx5/android/install-os.mdx ---- - -import Installdebian from "../radxa-os/install-os.mdx"; -import Installandroid from "../android/install-os.mdx"; - -# 安装系统 - - - - - - - - - - - - - diff --git a/docs/som/nx/nx5/getting-started/install-system/README.md b/docs/som/nx/nx5/getting-started/install-system/README.md new file mode 100644 index 000000000..9f016143a --- /dev/null +++ b/docs/som/nx/nx5/getting-started/install-system/README.md @@ -0,0 +1,7 @@ +--- +sidebar_position: 10 +--- + +# 安装系统 + + diff --git a/docs/som/nx/nx5/getting-started/install-system/emmc-system/README.md b/docs/som/nx/nx5/getting-started/install-system/emmc-system/README.md new file mode 100644 index 000000000..19a0fc2bf --- /dev/null +++ b/docs/som/nx/nx5/getting-started/install-system/emmc-system/README.md @@ -0,0 +1,7 @@ +--- +sidebar_position: 10 +--- + +# 安装系统到板载 eMMC + + diff --git a/docs/som/nx/nx5/getting-started/install-system/emmc-system/enter-maskrom.md b/docs/som/nx/nx5/getting-started/install-system/emmc-system/enter-maskrom.md new file mode 100644 index 000000000..631e0d66c --- /dev/null +++ b/docs/som/nx/nx5/getting-started/install-system/emmc-system/enter-maskrom.md @@ -0,0 +1,14 @@ +--- +sidebar_position: 5 + +doc_kind: wrapper +source_of_truth: common +imports_resolve_to: + - docs/common/radxa-os/rkdevtool/_maskrom.mdx +--- + +import Maskrom from '../../../../../../common/radxa-os/rkdevtool/\_maskrom.mdx'; + +# 进入 Maskrom 模式 + + diff --git a/docs/som/nx/nx5/getting-started/install-system/emmc-system/install-emmc.md b/docs/som/nx/nx5/getting-started/install-system/emmc-system/install-emmc.md new file mode 100644 index 000000000..0dc61ba22 --- /dev/null +++ b/docs/som/nx/nx5/getting-started/install-system/emmc-system/install-emmc.md @@ -0,0 +1,43 @@ +--- +sidebar_position: 10 + +doc_kind: wrapper +source_of_truth: common +imports_resolve_to: + - docs/common/radxa-os/rkdevtool/_emmc.mdx +--- + +import EMMC from '../../../../../../common/radxa-os/rkdevtool/\_emmc.mdx'; + +# 安装系统到板载 eMMC + +## 线刷系统 + + + +## 启动系统 + +完成系统的安装后，连接 HDMI 显示器，重新插拔电源适配器，即可启动系统。 + +
+ +
+ +① : 使用 HDMI 或 DP 数据线连接显示器和主板 + +② : 使用 USB-A 接口连接鼠标或键盘 + +③ : 使用 5V DC 电源适配器给主板供电 + +若主板供电正常，瑞莎 NX5 系统指示灯和瑞莎 NX5 载板的电源指示灯亮绿色；若系统启动正常，瑞莎 NX5 系统指示灯绿色闪烁，瑞莎 NX5 载板的状态指示灯蓝色闪烁。 + +## 登录系统 + +当您首次启动系统后，需要使用默认的用户名和密码登录。 + +Radxa OS 的默认凭据如下： + +| 项目 | 内容 | +| :----- | :------ | +| 用户名 | `radxa` | +| 密码 | `radxa` | diff --git a/docs/som/nx/nx5/getting-started/install-system/emmc-system/install-rkdevtool.md b/docs/som/nx/nx5/getting-started/install-system/emmc-system/install-rkdevtool.md new file mode 100644 index 000000000..65d837ec3 --- /dev/null +++ b/docs/som/nx/nx5/getting-started/install-system/emmc-system/install-rkdevtool.md @@ -0,0 +1,14 @@ +--- +sidebar_position: 1 + +doc_kind: wrapper +source_of_truth: common +imports_resolve_to: + - docs/common/radxa-os/rkdevtool/_use.mdx +--- + +import UseRKDevTool from '../../../../../../common/radxa-os/rkdevtool/\_use.mdx'; + +# 安装 RKDevTool + + diff --git a/docs/som/nx/nx5/getting-started/install-system/microsd-system.md b/docs/som/nx/nx5/getting-started/install-system/microsd-system.md new file mode 100644 index 000000000..4cd913833 --- /dev/null +++ b/docs/som/nx/nx5/getting-started/install-system/microsd-system.md @@ -0,0 +1,36 @@ +--- +sidebar_position: 1 +--- + +import BalenaEtcherUse from '../../../../../common/radxa-os/install-system/\_use_etcher_sd.mdx'; + +# 安装系统到 microSD 卡 + + + +## 启动系统 + +① : 将 microSD 卡插入 microSD 卡槽 + +② : 使用 HDMI 或 DP 数据线连接显示器和主板 + +③ : 使用 USB-A 接口连接鼠标或键盘 + +④ : 使用 5V DC 电源适配器给主板供电 + +若主板供电正常，瑞莎 NX5 系统指示灯和瑞莎 NX5 载板的电源指示灯亮绿色；若系统启动正常，瑞莎 NX5 系统指示灯绿色闪烁，瑞莎 NX5 载板的状态指示灯蓝色闪烁。 + +
+ +
+ +成功启动系统后，显示器会显示系统桌面，你可以根据系统信息登录并使用系统。 + +## 系统信息 + +使用官方系统镜像时，请使用以下默认登录凭据： + +| 项目 | 内容 | +| :----- | :------ | +| 用户名 | `radxa` | +| 密码 | `radxa` | diff --git a/docs/som/nx/nx5/getting-started/preparation.md b/docs/som/nx/nx5/getting-started/preparation.md deleted file mode 100644 index 68d50e1db..000000000 --- a/docs/som/nx/nx5/getting-started/preparation.md +++ /dev/null @@ -1,38 +0,0 @@ ---- -sidebar_position: 1 ---- - -# 准备工作 - -## 开发准备 - -### 供电 - -RADXA NX5 IO 采用 DC 接口供电，仅支持 5V 输入 - -:::tip -瑞莎推荐使用 [Radxa Power PD30W](../accessories/power/pd_30w) -::: - -### 存储 - -microSD 卡，容量不小于 8GB, 用于系统启动盘 - -### 显示 - -带有 HDMI 或 DP 接口的显示器，HDMI 最高可支持8K显示输出 - -### 网络连接 - -- NX5 IO 提供以太网口可接入1000M 以太网 -- 提供 M.2 KEY 接口，可兼容市面上常见的 PCIe 协议网卡，如 AX210, A8 模组 - -### USB 鼠标/键盘 - -可插入标准的鼠标键盘外设，用于系统调试和操作 - -## 常见问题 - -## 注意事项 - -## 参考文档 diff --git a/docs/som/nx/nx5/getting-started/quickly-start.md b/docs/som/nx/nx5/getting-started/quickly-start.md new file mode 100644 index 000000000..3834339d2 --- /dev/null +++ b/docs/som/nx/nx5/getting-started/quickly-start.md @@ -0,0 +1,102 @@ +--- +sidebar_position: 1 +--- + +import UseRKDevTool from '../../../../common/radxa-os/rkdevtool/\_use.mdx'; +import EMMC from '../../../../common/radxa-os/rkdevtool/\_emmc.mdx'; +import Maskrom from '../../../../common/radxa-os/rkdevtool/\_maskrom.mdx'; + +# 快速上手 + +本节教程将指导您快速上手使用瑞莎 NX5 开发套件，帮助您快速验证瑞莎 NX5 的功能。 + +## 产品实物 + +瑞莎 NX5 开发套件由瑞莎 NX5 核心模组、瑞莎 NX5 载板及主动散热器组成，提供了完整的硬件开发平台，可用于快速验证核心板功能、评估性能并搭建原型系统，帮助用户高效完成开发与方案验证。 + +说明：瑞莎 NX5 载板需要用户自行购买 + +
+ +
+ +## 使用前提 + +您需要提前准备以下硬件设备： + +- 瑞莎 NX5 开发套件 +- 供电：DC 5525 电源适配器（5V 输入） +- 系统启动介质：板载 eMMC +- 数据线：Micro USB 数据线（用于线刷系统到 eMMC） +- 显示设备：HDMI 数据线和显示器 +- 输入设备：键盘和鼠标（用于图形界面操作） + +:::tip 推荐配件 + +- 推荐使用 5V/3A 或以上规格的 DC 电源适配器进行供电 + +::: + +## 安装系统 + +:::tip 系统说明 + +若需要安装系统到 microSD 卡，请参考 [安装系统到 microSD 卡](./install-system/microsd-system.md) + +若 microSD 卡和板载 eMMC 均存在系统，系统将优先从 microSD 卡启动。 + +::: + +快速上手主要介绍安装系统到瑞莎 NX5 的板载 eMMC。 + +:::warning 重要提醒 + +**安装系统会完全格式化 eMMC，所有数据将被永久删除！** + +请在操作前确认： + +- eMMC 中无重要数据或已完成资料备份 + ::: + +### 安装 RKDevTool + + + +### 进入 Maskrom 模式 + + + +### 安装系统到 eMMC + + + +## 启动系统 + +完成系统的安装后，连接 HDMI 显示器，重新插拔电源适配器，即可启动系统。 + +
+ +
+ +① : 使用 HDMI 或 DP 数据线连接显示器和主板 + +② : 使用 USB-A 接口连接鼠标或键盘 + +③ : 使用 5V DC 电源适配器给主板供电 + +若主板供电正常，瑞莎 NX5 系统指示灯和瑞莎 NX5 载板的电源指示灯亮绿色；若系统启动正常，瑞莎 NX5 系统指示灯绿色闪烁，瑞莎 NX5 载板的状态指示灯蓝色闪烁。 + +## 登录系统 + +当您首次启动系统后，需要使用默认的用户名和密码登录。 + +Radxa OS 的默认凭据如下： + +| 项目 | 内容 | +| :----- | :------ | +| 用户名 | `radxa` | +| 密码 | `radxa` | + +## 使用系统 + +成功登录系统后，您就可以在瑞莎 NX5 开发套件上进行系统配置与开发。 diff --git a/docs/som/nx/nx5/hardware-use/README.md b/docs/som/nx/nx5/hardware-use/README.md new file mode 100644 index 000000000..c0317ba6b --- /dev/null +++ b/docs/som/nx/nx5/hardware-use/README.md @@ -0,0 +1,7 @@ +--- +sidebar_position: 15 +--- + +# 硬件使用 + + diff --git a/docs/som/nx/nx5/hardware/hw-interface.md b/docs/som/nx/nx5/hardware-use/gpio.md similarity index 83% rename from docs/som/nx/nx5/hardware/hw-interface.md rename to docs/som/nx/nx5/hardware-use/gpio.md index bb3215deb..401d18467 100644 --- a/docs/som/nx/nx5/hardware/hw-interface.md +++ b/docs/som/nx/nx5/hardware-use/gpio.md @@ -1,57 +1,23 @@ --- -sidebar_position: 4 +sidebar_position: 5 --- -# 硬件接口说明 +# 40-Pin GPIO 排针 -## 接口总览 +瑞莎 NX5 载板板载 40-Pin GPIO（通用输入输出）接口，为硬件扩展提供了高度灵活的接口支持。 -![Radxa NX5](/img/nx5/nx5-overview.webp) -![Radxa NX5 IO](/img/nx5/nx5-io/nx5-io-overview.webp) +用户可以通过 40-Pin GPIO 接口连接各类传感器、执行器、通信模块、显示屏以及其他嵌入式外设，从而快速实现物联网、机器人控制、工业自动化等领域的原型开发与功能验证。 -- 4x USB3.0 Host -- 1x Micro USB 2.0 OTG -- 2x MIPI CSI -- 1x M.2 E Key -- 1x TF Card Slot -- 1x DP -- 1x HDMI -- 1x Gigabit Ethernet -- 1x 40 PIN IO -- 1x Fan Header -- 2x LED Light -- 1x Power Input -- 1x Maskrom Key -- 1x Power Key +:::danger 使用说明 -## 电源接口 +使用 40-Pin GPIO 接口时，请注意引脚和外设的接线，请确保引脚连接正确，不当操作可能导致设备硬件损坏。 -采用 DC 电源接口供电，仅支持 5V 输入 +::: -## 调试串口 +## GPIO 功能 -用于系统调试，底层日志消息输出 -参考 [串口调试](../radxa-os/low-level-dev/serial) - -## 有线网口 - -提供以太网接口，可接入千兆以太网 - -## 40 PIN GPIO - -### GPIO 电压 - -| GPIO | 电压 | 最高 | -| ---------- | ---- | ----- | -| 所有的GPIO | 3.3V | 3.63V | -| SARADC_IN4 | 1.8V | 1.98V | - -### GPIO 接口 - -Radxa NX5 IO 提供了一个40pin针脚的GPIO座子，兼容于市面上大部分传感器的应用。 -**_提示:_ 实际兼容情况以使用为准。** - -
+ +
| GPIO number | Function7 | Function6 | Function5 | Function4 | Function3 | Function2 | Function1 | Pin# | Pin# | Function1 | Function2 | Function3 | Function4 | Function5 | Function6 | Function7 | GPIO number | | :---------: | :-------: | :----------: | :-----------: | :----------: | :--------: | :---------: | :-------: | :------------------------------: | :-----------------------------: | :-------: | :---------: | :---------: | :----------: | :---------------------------------------: | :----------: | :--------: | :---------: | @@ -76,24 +42,5 @@ Radxa NX5 IO 提供了一个40pin针脚的GPIO座子，兼容于市面上大部 | 57 | I2S0_SDI3 | I2S0_SDO2 | UART6_RX_M2 | SPI1_MOSI_M2 | | I2C7_SDA_M0 | GPIO1_D1 |
37
|
38
| GPIO1_D4 | | | | | I2S0_SDI0 | | 60 | | | | | | | | | GND |
39
|
40
| GPIO1_C7 | I2C4_SCL_M4 | | | UART4_CTSN | I2S0_SDO0 | | 55 | -
- -## WIFI/BT - -提供 M.2 KEY 接口，可兼容市面上常见的 PCIe 协议网卡，如 Radxa Wireless A8 模组 - -## HDMI/DP - -配备全尺寸 HDMI 和 DP 接口，支持常规的4K、2K、1080P等分辨率, HDMI 接口最高支持 8K 分辨率 - -## USB - -提供 4 个 USB3.0 端口，兼容 USB2.0 - -## MIPI CSI - -支持 MIPI 摄像头 - -## MicroSD - -可用于系统启动盘，也可以充当存储介质使用 +
+ diff --git a/docs/som/nx/nx5/hardware-use/hardware-info.md b/docs/som/nx/nx5/hardware-use/hardware-info.md new file mode 100644 index 000000000..228ee153b --- /dev/null +++ b/docs/som/nx/nx5/hardware-use/hardware-info.md @@ -0,0 +1,66 @@ +--- +sidebar_position: 1 +--- + +# 硬件信息 + +## 芯片框图 + +
+ +
+ +## 接口说明 + + + + + +
+ +
+ +| 序号 | 说明 | 序号 | 说明 | 序号 | 说明 | +| :--: | :-------------- | :--: | :------------- | :--: | :-------- | +| 1 | LPDDR4X | 2 | 瑞芯微 RK3588S | 3 | 板载 eMMC | +| 4 | 260-pin SO-DIMM | 5 | SPI Flash | | | + + + + + +
+ +
+ +| 序号 | 说明 | 序号 | 说明 | 序号 | 说明 | +| :--: | :--------------------- | :--: | :----------------------------- | :--: | :------------------------- | +| 1 | 2x USB 3.1 Gen1 Type-A | 2 | 上：DP 输出
下：HDMI 输出 | 3 | DC5525 供电接口（5V 输入） | +| 4 | 风扇接口 | 5 | MIPI 摄像头接口 | 6 | MIPI 摄像头接口 | +| 7 | 电源按键 | 8 | Maskrom 按键 | 9 | microSD 卡槽 | +| 10 | M.2 E Key 2230 插槽 | 11 | 40-Pin GPIO 排针 | 12 | 260-pin SO-DIMM 插槽 | +| 13 | micro USB 接口（OTG） | 14 | 千兆以太网接口 | 15 | 2x USB 3.1 Gen1 Type-A | + + + + + +
+ 瑞莎 NX5 开发套件接口图 +
+ +| 序号 | 说明 | 序号 | 说明 | +| :--: | :------------ | :--: | :------- | +| 1 | 瑞莎 NX5 载板 | 2 | 瑞莎 NX5 | + + + + + +- 瑞莎 NX5 + +瑞莎 NX5 板载一个系统状态指示灯，绿色常亮说明供电正常，绿色闪烁说明系统启动正常。 + +- 瑞莎 NX5 载板 + +瑞莎 NX5 载板板载电源指示灯和系统状态指示灯，电源指示灯绿色常亮说明供电正常，系统状态指示灯蓝色闪缩说明系统启动正常。 diff --git a/docs/som/nx/nx5/hardware/README.md b/docs/som/nx/nx5/hardware/README.md deleted file mode 100644 index 80c494934..000000000 --- a/docs/som/nx/nx5/hardware/README.md +++ /dev/null @@ -1,7 +0,0 @@ ---- -sidebar_position: 4 ---- - -# 硬件信息 - - diff --git a/docs/som/nx/nx5/hardware/hw-revision.md b/docs/som/nx/nx5/hardware/hw-revision.md deleted file mode 100644 index 4f64731a3..000000000 --- a/docs/som/nx/nx5/hardware/hw-revision.md +++ /dev/null @@ -1,10 +0,0 @@ ---- -sidebar_position: 4 ---- - -# 硬件版本 - -## V1.11 - -- 版本丝印更新为 V1.11 -- 删除 Maskrom 按键 diff --git a/docs/som/nx/nx5/low-level-dev/README.md b/docs/som/nx/nx5/low-level-dev/README.md new file mode 100644 index 000000000..9a90303dd --- /dev/null +++ b/docs/som/nx/nx5/low-level-dev/README.md @@ -0,0 +1,9 @@ +--- +sidebar_position: 17 +--- + +# 底层开发 + +对瑞莎 NX5 进行底层开发做简单的介绍。 + + diff --git a/docs/som/nx/nx5/low-level-dev/kernel.md b/docs/som/nx/nx5/low-level-dev/kernel.md new file mode 100644 index 000000000..212a73506 --- /dev/null +++ b/docs/som/nx/nx5/low-level-dev/kernel.md @@ -0,0 +1,15 @@ +--- +sidebar_position: 2 +description: "用 Radxa BSP 工具，轻松构建个性化 Linux 内核，享受定制化硬件开发的乐趣" + +doc_kind: wrapper +source_of_truth: common +imports_resolve_to: + - docs/common/dev/_kernel.mdx +--- + +import KERNEL from '../../../../common/dev/\_kernel.mdx' + +# Kernel 开发 + + diff --git a/docs/som/nx/nx5/radxa-os/low-level-dev/rsdk.md b/docs/som/nx/nx5/low-level-dev/rsdk.md similarity index 50% rename from docs/som/nx/nx5/radxa-os/low-level-dev/rsdk.md rename to docs/som/nx/nx5/low-level-dev/rsdk.md index 3d29cf383..3fc726fcb 100644 --- a/docs/som/nx/nx5/radxa-os/low-level-dev/rsdk.md +++ b/docs/som/nx/nx5/low-level-dev/rsdk.md @@ -1,6 +1,6 @@ --- -sidebar_position: 4 -description: "使用 rsdk 工具定制您的系统" +sidebar_position: 3 +description: "使用 RSDK 工具定制您的系统" doc_kind: wrapper source_of_truth: common @@ -8,7 +8,7 @@ imports_resolve_to: - docs/common/dev/_rsdk.mdx --- -import RSDK from '../../../../../common/dev/\_rsdk.mdx' +import RSDK from '../../../../common/dev/\_rsdk.mdx' # 编译 RadxaOS diff --git a/docs/som/nx/nx5/low-level-dev/u-boot.md b/docs/som/nx/nx5/low-level-dev/u-boot.md new file mode 100644 index 000000000..a2392d10c --- /dev/null +++ b/docs/som/nx/nx5/low-level-dev/u-boot.md @@ -0,0 +1,15 @@ +--- +sidebar_position: 1 +description: "用 Radxa BSP 工具，轻松构建个性化 U-boot，开启智能硬件的创新之旅" + +doc_kind: wrapper +source_of_truth: common +imports_resolve_to: + - docs/common/dev/_u-boot.mdx +--- + +import UBOOT from '../../../../common/dev/\_u-boot.mdx' + +# U-boot 开发 + + diff --git a/docs/som/nx/nx5/radxa-os/README.md b/docs/som/nx/nx5/radxa-os/README.md deleted file mode 100644 index a496da5ef..000000000 --- a/docs/som/nx/nx5/radxa-os/README.md +++ /dev/null @@ -1,7 +0,0 @@ ---- -sidebar_position: 2 ---- - -# 瑞莎系统 - - diff --git a/docs/som/nx/nx5/radxa-os/ap.md b/docs/som/nx/nx5/radxa-os/ap.md deleted file mode 100644 index 9bccc8a04..000000000 --- a/docs/som/nx/nx5/radxa-os/ap.md +++ /dev/null @@ -1,12 +0,0 @@ ---- -doc_kind: wrapper -source_of_truth: common -imports_resolve_to: - - docs/common/radxa-os/_ap.mdx ---- - -import AP from "../../../../common/radxa-os/\_ap.mdx"; - -# Wi-Fi 热点 - - diff --git a/docs/som/nx/nx5/radxa-os/app-dev/README.md b/docs/som/nx/nx5/radxa-os/app-dev/README.md deleted file mode 100644 index 56feb7ca7..000000000 --- a/docs/som/nx/nx5/radxa-os/app-dev/README.md +++ /dev/null @@ -1,9 +0,0 @@ ---- -sidebar_position: 5 ---- - -# 应用开发 - -主要介绍上层应用开发，比如QT, Mraa 等 - - diff --git a/docs/som/nx/nx5/radxa-os/app-dev/ai/README.md b/docs/som/nx/nx5/radxa-os/app-dev/ai/README.md deleted file mode 100644 index 1f4a63ff7..000000000 --- a/docs/som/nx/nx5/radxa-os/app-dev/ai/README.md +++ /dev/null @@ -1,9 +0,0 @@ ---- -sidebar_position: 50 ---- - -# 人工智能 - -介绍人工智能相关应用，包括 RKNN 和 RKLLM 工具链使用，RKNN Model Zoo 模型示例仓库以及常见的模型部署流程。 - - diff --git a/docs/som/nx/nx5/radxa-os/app-dev/ai/clip.md b/docs/som/nx/nx5/radxa-os/app-dev/ai/clip.md deleted file mode 100644 index f76c03e8b..000000000 --- a/docs/som/nx/nx5/radxa-os/app-dev/ai/clip.md +++ /dev/null @@ -1,14 +0,0 @@ ---- -sidebar_position: 25 - -doc_kind: wrapper -source_of_truth: common -imports_resolve_to: - - docs/common/ai/rockchip/_clip.mdx ---- - -import CLIP from "../../../../../../common/ai/rockchip/\_clip.mdx" - -# CLIP - - diff --git a/docs/som/nx/nx5/radxa-os/app-dev/ai/deeplabv3.md b/docs/som/nx/nx5/radxa-os/app-dev/ai/deeplabv3.md deleted file mode 100644 index b4af37b09..000000000 --- a/docs/som/nx/nx5/radxa-os/app-dev/ai/deeplabv3.md +++ /dev/null @@ -1,14 +0,0 @@ ---- -sidebar_position: 19 - -doc_kind: wrapper -source_of_truth: common -imports_resolve_to: - - docs/common/ai/rockchip/_deeplabv3.mdx ---- - -import Deeplabv3 from "../../../../../../common/ai/rockchip/\_deeplabv3.mdx" - -# DeepLabV3 - - diff --git a/docs/som/nx/nx5/radxa-os/app-dev/ai/lprnet.md b/docs/som/nx/nx5/radxa-os/app-dev/ai/lprnet.md deleted file mode 100644 index e9f02866b..000000000 --- a/docs/som/nx/nx5/radxa-os/app-dev/ai/lprnet.md +++ /dev/null @@ -1,14 +0,0 @@ ---- -sidebar_position: 21 - -doc_kind: wrapper -source_of_truth: common -imports_resolve_to: - - docs/common/ai/rockchip/_lprnet.mdx ---- - -import LPRNet from "../../../../../../common/ai/rockchip/\_lprnet.mdx" - -# LPRNet - - diff --git a/docs/som/nx/nx5/radxa-os/app-dev/ai/mobilenet.md b/docs/som/nx/nx5/radxa-os/app-dev/ai/mobilenet.md deleted file mode 100644 index 4184bc209..000000000 --- a/docs/som/nx/nx5/radxa-os/app-dev/ai/mobilenet.md +++ /dev/null @@ -1,14 +0,0 @@ ---- -sidebar_position: 24 - -doc_kind: wrapper -source_of_truth: common -imports_resolve_to: - - docs/common/ai/rockchip/_mobilenet.mdx ---- - -import MobileNet from "../../../../../../common/ai/rockchip/\_mobilenet.mdx" - -# MobileNet - - diff --git a/docs/som/nx/nx5/radxa-os/app-dev/ai/mobilesam.md b/docs/som/nx/nx5/radxa-os/app-dev/ai/mobilesam.md deleted file mode 100644 index 419b08915..000000000 --- a/docs/som/nx/nx5/radxa-os/app-dev/ai/mobilesam.md +++ /dev/null @@ -1,14 +0,0 @@ ---- -sidebar_position: 18 - -doc_kind: wrapper -source_of_truth: common -imports_resolve_to: - - docs/common/ai/rockchip/_mobilesam.mdx ---- - -import Mobilesam from "../../../../../../common/ai/rockchip/\_mobilesam.mdx" - -# MobileSAM - - diff --git a/docs/som/nx/nx5/radxa-os/app-dev/ai/ppocr.md b/docs/som/nx/nx5/radxa-os/app-dev/ai/ppocr.md deleted file mode 100644 index ddf3ec47e..000000000 --- a/docs/som/nx/nx5/radxa-os/app-dev/ai/ppocr.md +++ /dev/null @@ -1,14 +0,0 @@ ---- -sidebar_position: 20 - -doc_kind: wrapper -source_of_truth: common -imports_resolve_to: - - docs/common/ai/rockchip/_ppocr.mdx ---- - -import PPOCR from "../../../../../../common/ai/rockchip/\_ppocr.mdx" - -# PP-OCR - - diff --git a/docs/som/nx/nx5/radxa-os/app-dev/ai/ppyoloe.md b/docs/som/nx/nx5/radxa-os/app-dev/ai/ppyoloe.md deleted file mode 100644 index 1a32f6fcd..000000000 --- a/docs/som/nx/nx5/radxa-os/app-dev/ai/ppyoloe.md +++ /dev/null @@ -1,14 +0,0 @@ ---- -sidebar_position: 15 - -doc_kind: wrapper -source_of_truth: common -imports_resolve_to: - - docs/common/ai/rockchip/_ppyoloe.mdx ---- - -import PPYOLOE from "../../../../../../common/ai/rockchip/\_ppyoloe.mdx" - -# PP-YOLOE - - diff --git a/docs/som/nx/nx5/radxa-os/app-dev/ai/resnet.md b/docs/som/nx/nx5/radxa-os/app-dev/ai/resnet.md deleted file mode 100644 index 0664035a1..000000000 --- a/docs/som/nx/nx5/radxa-os/app-dev/ai/resnet.md +++ /dev/null @@ -1,14 +0,0 @@ ---- -sidebar_position: 23 - -doc_kind: wrapper -source_of_truth: common -imports_resolve_to: - - docs/common/ai/rockchip/_resnet.mdx ---- - -import ResNet from "../../../../../../common/ai/rockchip/\_resnet.mdx" - -# ResNet - - diff --git a/docs/som/nx/nx5/radxa-os/app-dev/ai/retinaface.md b/docs/som/nx/nx5/radxa-os/app-dev/ai/retinaface.md deleted file mode 100644 index f83c6af73..000000000 --- a/docs/som/nx/nx5/radxa-os/app-dev/ai/retinaface.md +++ /dev/null @@ -1,14 +0,0 @@ ---- -sidebar_position: 22 - -doc_kind: wrapper -source_of_truth: common -imports_resolve_to: - - docs/common/ai/rockchip/_retinaface.mdx ---- - -import Retinaface from "../../../../../../common/ai/rockchip/\_retinaface.mdx" - -# RetinaFace - - diff --git a/docs/som/nx/nx5/radxa-os/app-dev/ai/rkllm-deepseek-r1.md b/docs/som/nx/nx5/radxa-os/app-dev/ai/rkllm-deepseek-r1.md deleted file mode 100644 index 973cc6459..000000000 --- a/docs/som/nx/nx5/radxa-os/app-dev/ai/rkllm-deepseek-r1.md +++ /dev/null @@ -1,14 +0,0 @@ ---- -sidebar_position: 12 - -doc_kind: wrapper -source_of_truth: common -imports_resolve_to: - - docs/common/dev/_rkllm-deepseek-r1.mdx ---- - -# RKLLM DeepSeek-R1 - -import RKLLMDEEPSEEKR1 from '../../../../../../common/dev/\_rkllm-deepseek-r1.mdx'; - - diff --git a/docs/som/nx/nx5/radxa-os/app-dev/ai/rkllm-install.md b/docs/som/nx/nx5/radxa-os/app-dev/ai/rkllm-install.md deleted file mode 100644 index 77cc4aaac..000000000 --- a/docs/som/nx/nx5/radxa-os/app-dev/ai/rkllm-install.md +++ /dev/null @@ -1,14 +0,0 @@ ---- -sidebar_position: 3 - -doc_kind: wrapper -source_of_truth: common -imports_resolve_to: - - docs/common/dev/_rkllm-install.mdx ---- - -# RKLLM 安装 - -import Rkllminstall from '../../../../../../common/dev/\_rkllm-install.mdx'; - - diff --git a/docs/som/nx/nx5/radxa-os/app-dev/ai/rkllm-qwen2-vl.md b/docs/som/nx/nx5/radxa-os/app-dev/ai/rkllm-qwen2-vl.md deleted file mode 100644 index 90eefbc1b..000000000 --- a/docs/som/nx/nx5/radxa-os/app-dev/ai/rkllm-qwen2-vl.md +++ /dev/null @@ -1,15 +0,0 @@ ---- -sidebar_position: 13 -description: "使用 RKLLM 运行 Qwen2_VL 大语言模型" - -doc_kind: wrapper -source_of_truth: common -imports_resolve_to: - - docs/common/dev/_rkllm_qwen2_vl.mdx ---- - -# RKLLM Qwen2-VL - -import RKLLMQWEN2VL from '../../../../../../common/dev/\_rkllm_qwen2_vl.mdx'; - - diff --git a/docs/som/nx/nx5/radxa-os/app-dev/ai/rkllm-smolvlm2.md b/docs/som/nx/nx5/radxa-os/app-dev/ai/rkllm-smolvlm2.md deleted file mode 100644 index b9fb280a1..000000000 --- a/docs/som/nx/nx5/radxa-os/app-dev/ai/rkllm-smolvlm2.md +++ /dev/null @@ -1,15 +0,0 @@ ---- -sidebar_position: 28 -description: 使用 RKNN 转换Stable Diffusion模型 - -doc_kind: wrapper -source_of_truth: common -imports_resolve_to: - - docs/common/ai/_rkllm_smolvlm2.mdx ---- - -# RKLLM SmolVLM2 - -import SMOLVLM2 from "../../../../../../common/ai/\_rkllm_smolvlm2.mdx"; - - diff --git a/docs/som/nx/nx5/radxa-os/app-dev/ai/rkllm-usage.md b/docs/som/nx/nx5/radxa-os/app-dev/ai/rkllm-usage.md deleted file mode 100644 index c027feeaa..000000000 --- a/docs/som/nx/nx5/radxa-os/app-dev/ai/rkllm-usage.md +++ /dev/null @@ -1,14 +0,0 @@ ---- -sidebar_position: 4 - -doc_kind: wrapper -source_of_truth: common -imports_resolve_to: - - docs/common/dev/_rkllm-usage.mdx ---- - -# RKLLM 使用与大语言模型部署 - -import Rkllmusage from '../../../../../../common/dev/\_rkllm-usage.mdx'; - - diff --git a/docs/som/nx/nx5/radxa-os/app-dev/ai/rknn-custom-yolo.md b/docs/som/nx/nx5/radxa-os/app-dev/ai/rknn-custom-yolo.md deleted file mode 100644 index 8eef61c6a..000000000 --- a/docs/som/nx/nx5/radxa-os/app-dev/ai/rknn-custom-yolo.md +++ /dev/null @@ -1,15 +0,0 @@ ---- -sidebar_position: 10 -description: "转换自训练的 YOLO 模型" - -doc_kind: wrapper -source_of_truth: common -imports_resolve_to: - - docs/common/ai/_rknn_custom_yolo.mdx ---- - -# 转换自训练 YOLO 模型 - -import RKNNCUSTOMYOLO from '../../../../../../common/ai/\_rknn_custom_yolo.mdx'; - - diff --git a/docs/som/nx/nx5/radxa-os/app-dev/ai/rknn-install.md b/docs/som/nx/nx5/radxa-os/app-dev/ai/rknn-install.md deleted file mode 100644 index fa938335a..000000000 --- a/docs/som/nx/nx5/radxa-os/app-dev/ai/rknn-install.md +++ /dev/null @@ -1,14 +0,0 @@ ---- -sidebar_position: 1 - -doc_kind: wrapper -source_of_truth: common -imports_resolve_to: - - docs/common/dev/_rknn-install.mdx ---- - -# RKNN 安装 - -import RKNNinstall from '../../../../../../common/dev/\_rknn-install.mdx'; - - diff --git a/docs/som/nx/nx5/radxa-os/app-dev/ai/rknn-model-zoo.md b/docs/som/nx/nx5/radxa-os/app-dev/ai/rknn-model-zoo.md deleted file mode 100644 index 20b9e7abc..000000000 --- a/docs/som/nx/nx5/radxa-os/app-dev/ai/rknn-model-zoo.md +++ /dev/null @@ -1,14 +0,0 @@ ---- -sidebar_position: 2 - -doc_kind: wrapper -source_of_truth: common -imports_resolve_to: - - docs/common/ai/rockchip/_rknn_model_zoo.mdx ---- - -# RKNN Model Zoo - -import RKNNModelZoo from "../../../../../../common/ai/rockchip/\_rknn_model_zoo.mdx" - - diff --git a/docs/som/nx/nx5/radxa-os/app-dev/ai/rknn-quick-start.md b/docs/som/nx/nx5/radxa-os/app-dev/ai/rknn-quick-start.md deleted file mode 100644 index d7925dab6..000000000 --- a/docs/som/nx/nx5/radxa-os/app-dev/ai/rknn-quick-start.md +++ /dev/null @@ -1,14 +0,0 @@ ---- -sidebar_position: 5 - -doc_kind: wrapper -source_of_truth: common -imports_resolve_to: - - docs/common/dev/_rknn-toolkit2.mdx ---- - -# RKNN 快速例子 - -import Rknntoolkit2 from '../../../../../../common/dev/\_rknn-toolkit2.mdx'; - - diff --git a/docs/som/nx/nx5/radxa-os/app-dev/ai/rknn-stable-diffusion.md b/docs/som/nx/nx5/radxa-os/app-dev/ai/rknn-stable-diffusion.md deleted file mode 100644 index 9dc9bd6f7..000000000 --- a/docs/som/nx/nx5/radxa-os/app-dev/ai/rknn-stable-diffusion.md +++ /dev/null @@ -1,15 +0,0 @@ ---- -sidebar_position: 11 -description: 使用RKNN转换Stable Diffusion模型 - -doc_kind: wrapper -source_of_truth: common -imports_resolve_to: - - docs/common/ai/_stable_diffusion_convert.mdx ---- - -# RKNN Stable Diffusion LCM - -import StableDiffusionConvert from "../../../../../../common/ai/\_stable_diffusion_convert.mdx"; - - diff --git a/docs/som/nx/nx5/radxa-os/app-dev/ai/rknn-toolkit-lite2-yolov5.md b/docs/som/nx/nx5/radxa-os/app-dev/ai/rknn-toolkit-lite2-yolov5.md deleted file mode 100644 index 6619972e3..000000000 --- a/docs/som/nx/nx5/radxa-os/app-dev/ai/rknn-toolkit-lite2-yolov5.md +++ /dev/null @@ -1,14 +0,0 @@ ---- -sidebar_position: 7 - -doc_kind: wrapper -source_of_truth: common -imports_resolve_to: - - docs/common/dev/_rknn-toolkit-lite2-yolov5.mdx ---- - -# 板端部署 YOLOv5 目标检测 - -import RKNNTOOLKITLITE2YOLOV5 from '../../../../../../common/dev/\_rknn-toolkit-lite2-yolov5.mdx'; - - diff --git a/docs/som/nx/nx5/radxa-os/app-dev/ai/rknn-toolkit-lite2-yolov8.md b/docs/som/nx/nx5/radxa-os/app-dev/ai/rknn-toolkit-lite2-yolov8.md deleted file mode 100644 index 3e1377bec..000000000 --- a/docs/som/nx/nx5/radxa-os/app-dev/ai/rknn-toolkit-lite2-yolov8.md +++ /dev/null @@ -1,15 +0,0 @@ ---- -sidebar_position: 8 -description: "通过 RK3588 板端部署 YOLOv8，开启智能目标检测的新时代，让技术与人文关怀在精准识别中完美融合" - -doc_kind: wrapper -source_of_truth: common -imports_resolve_to: - - docs/common/dev/_rknn-toolkit-lite2-yolov8.mdx ---- - -# 板端部署 YOLOv8 目标检测 - -import RKNNTOOLKITLITE2YOLOV8 from '../../../../../../common/dev/\_rknn-toolkit-lite2-yolov8.mdx'; - - diff --git a/docs/som/nx/nx5/radxa-os/app-dev/ai/rknn-toolkit2-pc.md b/docs/som/nx/nx5/radxa-os/app-dev/ai/rknn-toolkit2-pc.md deleted file mode 100644 index e935a2fbf..000000000 --- a/docs/som/nx/nx5/radxa-os/app-dev/ai/rknn-toolkit2-pc.md +++ /dev/null @@ -1,15 +0,0 @@ ---- -sidebar_position: 6 -description: "利用 RKNN 工具包，探索 AI 模型的模拟推理，体验智能图像分割的高效与精准" - -doc_kind: wrapper -source_of_truth: common -imports_resolve_to: - - docs/common/dev/_rknn-toolkit2-pc.mdx ---- - -# 模拟推理 YOLOv5 分割模型 - -import RKNNTOOLKIT2PC from '../../../../../../common/dev/\_rknn-toolkit2-pc.mdx'; - - diff --git a/docs/som/nx/nx5/radxa-os/app-dev/ai/rknn-ultralytics.md b/docs/som/nx/nx5/radxa-os/app-dev/ai/rknn-ultralytics.md deleted file mode 100644 index efec4a329..000000000 --- a/docs/som/nx/nx5/radxa-os/app-dev/ai/rknn-ultralytics.md +++ /dev/null @@ -1,15 +0,0 @@ ---- -sidebar_position: 9 -description: "通过 RK3588/RK356X 板端部署 YOLOv11，开启智能目标检测的新时代，让技术与人文关怀在精准识别中完美融合" - -doc_kind: wrapper -source_of_truth: common -imports_resolve_to: - - docs/common/dev/_rknn-ultralytics.mdx ---- - -# RKNN Ultralytics YOLOv11 - -import RKNNULTRALYTICS from '../../../../../../common/dev/\_rknn-ultralytics.mdx'; - - diff --git a/docs/som/nx/nx5/radxa-os/app-dev/ai/wav2vec2.md b/docs/som/nx/nx5/radxa-os/app-dev/ai/wav2vec2.md deleted file mode 100644 index 22e99c9cb..000000000 --- a/docs/som/nx/nx5/radxa-os/app-dev/ai/wav2vec2.md +++ /dev/null @@ -1,14 +0,0 @@ ---- -sidebar_position: 27 - -doc_kind: wrapper -source_of_truth: common -imports_resolve_to: - - docs/common/ai/rockchip/_wav2vec2.mdx ---- - -import Wav2vec2 from "../../../../../../common/ai/rockchip/\_wav2vec2.mdx" - -# Wav2Vec 2.0 - - diff --git a/docs/som/nx/nx5/radxa-os/app-dev/ai/whisper.md b/docs/som/nx/nx5/radxa-os/app-dev/ai/whisper.md deleted file mode 100644 index 42d5c498d..000000000 --- a/docs/som/nx/nx5/radxa-os/app-dev/ai/whisper.md +++ /dev/null @@ -1,14 +0,0 @@ ---- -sidebar_position: 26 - -doc_kind: wrapper -source_of_truth: common -imports_resolve_to: - - docs/common/ai/rockchip/_whisper.mdx ---- - -import Whisper from "../../../../../../common/ai/rockchip/\_whisper.mdx" - -# Whisper - - diff --git a/docs/som/nx/nx5/radxa-os/app-dev/ai/yolo-world.md b/docs/som/nx/nx5/radxa-os/app-dev/ai/yolo-world.md deleted file mode 100644 index 294185ad8..000000000 --- a/docs/som/nx/nx5/radxa-os/app-dev/ai/yolo-world.md +++ /dev/null @@ -1,14 +0,0 @@ ---- -sidebar_position: 16 - -doc_kind: wrapper -source_of_truth: common -imports_resolve_to: - - docs/common/ai/rockchip/_yolo_world.mdx ---- - -import YOLOWorld from "../../../../../../common/ai/rockchip/\_yolo_world.mdx" - -# YOLO World - - diff --git a/docs/som/nx/nx5/radxa-os/app-dev/ai/yolov8-multi-stream.md b/docs/som/nx/nx5/radxa-os/app-dev/ai/yolov8-multi-stream.md deleted file mode 100644 index 62fee0e91..000000000 --- a/docs/som/nx/nx5/radxa-os/app-dev/ai/yolov8-multi-stream.md +++ /dev/null @@ -1,15 +0,0 @@ ---- -sidebar_position: 29 -description: 使用 RKNN 进行 YOLOv8 多路识别 - -doc_kind: wrapper -source_of_truth: common -imports_resolve_to: - - docs/common/ai/_rknn_yolov8_multi_stream.mdx ---- - -# YOLOv8 多路识别 - -import RKNNYOLOV8MULTISTREAM from "../../../../../../common/ai/\_rknn_yolov8_multi_stream.mdx"; - - diff --git a/docs/som/nx/nx5/radxa-os/app-dev/ai/yolov8-seg.md b/docs/som/nx/nx5/radxa-os/app-dev/ai/yolov8-seg.md deleted file mode 100644 index a7bd22e42..000000000 --- a/docs/som/nx/nx5/radxa-os/app-dev/ai/yolov8-seg.md +++ /dev/null @@ -1,14 +0,0 @@ ---- -sidebar_position: 17 - -doc_kind: wrapper -source_of_truth: common -imports_resolve_to: - - docs/common/ai/rockchip/_yolov8_seg.mdx ---- - -import YOLOv8Seg from "../../../../../../common/ai/rockchip/\_yolov8_seg.mdx" - -# YOLOv8-Seg - - diff --git a/docs/som/nx/nx5/radxa-os/app-dev/ai/yolov8.md b/docs/som/nx/nx5/radxa-os/app-dev/ai/yolov8.md deleted file mode 100644 index 72f565b27..000000000 --- a/docs/som/nx/nx5/radxa-os/app-dev/ai/yolov8.md +++ /dev/null @@ -1,14 +0,0 @@ ---- -sidebar_position: 14 - -doc_kind: wrapper -source_of_truth: common -imports_resolve_to: - - docs/common/ai/rockchip/_yolov8.mdx ---- - -import YOLOv8 from "../../../../../../common/ai/rockchip/\_yolov8.mdx" - -# YOLOv8 - - diff --git a/docs/som/nx/nx5/radxa-os/app-dev/mraa.md b/docs/som/nx/nx5/radxa-os/app-dev/mraa.md deleted file mode 100644 index 9be1ca84d..000000000 --- a/docs/som/nx/nx5/radxa-os/app-dev/mraa.md +++ /dev/null @@ -1,14 +0,0 @@ ---- -sidebar_position: 1 - -doc_kind: wrapper -source_of_truth: common -imports_resolve_to: - - docs/common/dev/_mraa.mdx ---- - -# Mraa 使用 - -import MRAA from '../../../../../common/dev/\_mraa.mdx'; - - diff --git a/docs/som/nx/nx5/radxa-os/app-dev/venv_usage.md b/docs/som/nx/nx5/radxa-os/app-dev/venv_usage.md deleted file mode 100644 index 0130b5009..000000000 --- a/docs/som/nx/nx5/radxa-os/app-dev/venv_usage.md +++ /dev/null @@ -1,14 +0,0 @@ ---- -sidebar_position: 2 - -doc_kind: wrapper -source_of_truth: common -imports_resolve_to: - - docs/common/dev/_venv_usage.mdx ---- - -# Python 虚拟环境使用 - -import VENVUSAGE from '../../../../../common/dev/\_venv_usage.mdx'; - - diff --git a/docs/som/nx/nx5/radxa-os/apps-deploy/README.md b/docs/som/nx/nx5/radxa-os/apps-deploy/README.md deleted file mode 100644 index 7ead9e508..000000000 --- a/docs/som/nx/nx5/radxa-os/apps-deploy/README.md +++ /dev/null @@ -1,9 +0,0 @@ ---- -sidebar_position: 4 ---- - -# 应用部署 - -主要介绍类似 Samba, Docker, PVE, OMV, LAMP, Cheese, 远程控制面板等常见应用的配置及使用 - - diff --git a/docs/som/nx/nx5/radxa-os/apps-deploy/docker.md b/docs/som/nx/nx5/radxa-os/apps-deploy/docker.md deleted file mode 100644 index 42e7d614c..000000000 --- a/docs/som/nx/nx5/radxa-os/apps-deploy/docker.md +++ /dev/null @@ -1,29 +0,0 @@ ---- -sidebar_position: 1 ---- - -# Docker - -Radxa Debian 在内核已经开启 Docker 相关的配置，只需安装 Docker 应用即可开始使用。 - -1. 安装 Docker - -```bash -sudo apt-get update -sudo apt-get install docker.io -``` - -2. 安装完成后执行以下两条命令 - -```bash -sudo update-alternatives --set iptables /usr/sbin/iptables-legacy -sudo update-alternatives --set ip6tables /usr/sbin/ip6tables-legacy -sudo reboot -``` - -3. 重启后运行 docker test,查看 运行状态 - -```bash -sudo docker run hello-world -sudo systemctl status docker -``` diff --git a/docs/som/nx/nx5/radxa-os/apps-deploy/samba.md b/docs/som/nx/nx5/radxa-os/apps-deploy/samba.md deleted file mode 100644 index a4e6386ca..000000000 --- a/docs/som/nx/nx5/radxa-os/apps-deploy/samba.md +++ /dev/null @@ -1,5 +0,0 @@ ---- -sidebar_position: 2 ---- - -# Samba diff --git a/docs/som/nx/nx5/radxa-os/fcitx-usage.md b/docs/som/nx/nx5/radxa-os/fcitx-usage.md deleted file mode 100644 index 1dc8d4fe8..000000000 --- a/docs/som/nx/nx5/radxa-os/fcitx-usage.md +++ /dev/null @@ -1,15 +0,0 @@ ---- -sidebar_position: 10 -description: "Fcitx5 输入法安装与使用" - -doc_kind: wrapper -source_of_truth: common -imports_resolve_to: - - docs/common/radxa-os/system-config/_fcitx_usage.mdx ---- - -import FCITX from "../../../../common/radxa-os/system-config/\_fcitx_usage.mdx"; - -# 输入法使用 - - diff --git a/docs/som/nx/nx5/radxa-os/install-os.mdx b/docs/som/nx/nx5/radxa-os/install-os.mdx deleted file mode 100644 index d9ccdd54c..000000000 --- a/docs/som/nx/nx5/radxa-os/install-os.mdx +++ /dev/null @@ -1,112 +0,0 @@ ---- -sidebar_position: 1 -title: 系统安装 ---- - -本文档将介绍如何把 Radxa OS 镜像安装到 Radxa NX5。 - -NX5 可以从 microSD 卡启动，也可以从板载 EMMC 启动，基于不同的启动方式，安装系统到不同的介质上. - - - - - -## 准备工作 - -### 准备安装介质 - -- microSD 卡 (建议class10等级以上) - -- USB 读卡器 - -### 镜像下载 - -请到 [资源下载汇总](../getting-started/download) 下载对应的镜像文件 - -:::tip 镜像说明 -下载的系统镜像为压缩格式，使用 Balena Etcher 进行镜像烧录前，需先完成解压操作。 -::: - -## 系统安装 - -1. 下载 [Etcher](https://etcher.balena.io/)。 - ![ROCK5A via Etcher 01](/img/rock5a/rock5a-etcher.webp) - -2. 打开 Etcher，将准备的操作系统镜像刷写到 microSD 卡。在 Etcher 窗口中，单击 `Flash from file` 选择刚下载的操作系统镜像。 - ![ROCK5A via Etcher 02](/img/rock5a/rock5a-etcher-1.webp) - -3. 在 Etcher 窗口中，点击 `Select target`。 - ![ROCK5A via Etcher 03](/img/rock5a/rock5a-etcher-2.webp) - -4. 在 Etcher 窗口中，点击 `Flash!` 然后等待刷写进度条。 - ![ROCK5A via Etcher 04](/img/rock5a/rock5a-etcher-3.webp) - -5. 在 Etcher 窗口中，当刷写成功时将会显示 `Flash Complete!` - ![ROCK5A via Etcher 05](/img/rock5a/rock5a-etcher-4.webp) - -## 系统启动 - -### 启动 NX5 IO - -1. 插入安装好操作系统的microSD卡 -2. 通过适配器为 NX5 IO 供电 -3. NX5 IO 将在绿色电源 LED 亮起的情况下启动， 进入系统后蓝色 LED 开始闪烁 - - - - - -## 准备工作 - -### 准备安装介质 - -- micro usb 转 typea usb 接口线缆 - -### 镜像下载 - -请到 [资源下载汇总](../getting-started/download) 下载对应的镜像文件 - -## 系统安装 - -### 系统安装 - -1. 将micro usb 线缆连接到主机 - -2. 按住 maskrom 按键后上电，此时会进入 maskrom 模式 - - - - - -#### Linux/Mac 系统使用 rkdeveloptool 写入 - -[rkdeveloptool](/compute-module/nx5/radxa-os/low-level-dev/rkdeveloptool) - -[upgrade_tool](/compute-module/nx5/radxa-os/low-level-dev/upgrade-tool)（可同时烧录多台设备） - - - - - -#### Windows 系统使用 rkdeveloptool 写入 - -[rkdevtool](/compute-module/nx5/radxa-os/low-level-dev/rkdevtool) - - - - - -## 系统启动 - -### 启动 NX5 IO - -1. 通过适配器为 NX5 IO 供电 -2. NX5 IO 将在绿色电源 LED 亮起的情况下启动， 进入系统后蓝色 LED 开始闪烁 - - - - - -## 常见问题 - -## 参考文档 diff --git a/docs/som/nx/nx5/radxa-os/low-level-dev/README.md b/docs/som/nx/nx5/radxa-os/low-level-dev/README.md deleted file mode 100644 index 817ef793b..000000000 --- a/docs/som/nx/nx5/radxa-os/low-level-dev/README.md +++ /dev/null @@ -1,9 +0,0 @@ ---- -sidebar_position: 7 ---- - -# 底层开发 - -主要介绍 uboot, kernel, debian os 编译打包等内容 - - diff --git a/docs/som/nx/nx5/radxa-os/low-level-dev/kernel.md b/docs/som/nx/nx5/radxa-os/low-level-dev/kernel.md deleted file mode 100644 index dff8ea195..000000000 --- a/docs/som/nx/nx5/radxa-os/low-level-dev/kernel.md +++ /dev/null @@ -1,52 +0,0 @@ ---- -sidebar_position: 2 ---- - -# Kernel - -## 环境配置 - -[bsp](https://github.com/radxa-repo/bsp) 是 Radxa 提供的一套快速构建 U-Boot Kernel 的工具，使用 bsp 非常方便就能构建出自己的 U-Boot 和 Kernel. -下面将为您展示如何使用 bsp 构建 Radxa NX5 IO 的内核 - -[bsp 环境配置](https://radxa-repo.github.io/bsp/) - -## 编译内核 - -完成 bsp 环境配置后，需要先编译一次内核才会从仓库拉取内核代码，可以执行`./bsp linux rockchip`构建内核, 内核源码的路径位于 bsp 目录下的 `.src/linux` - -```shell -cd bsp -mkdir output -cd output -../bsp --no-prepare-source linux rockchip -r 1 - -参数说明： ---no-prepare-source # 使用本地修改进行编译，如果不加这个参数将会从 Radxa kernel 仓库同步最新代码并覆盖本地修改 --r 1 # 指定内核的版本号为 1, 用于指定不同内核版本的启动顺序 -``` - -:::note - -配置的内核版本号需要大于当前内核版本号才会默认使用新内核启动 - -::: - -更多 bsp 参数使用说明可以执行 `./bsp`查看 - -编译完成后会在 bsp/output 目录生成许多 `deb` 包， 只需要安装下面两个 `deb` 即可 - -```shell -linux-headers-5.10.110-1-rockchip_5.10.110-1_arm64.deb -linux-image-5.10.110-1-rockchip_5.10.110-1_arm64.deb -``` - -将上面两个 `deb` 包复制到板子上使用 `dpkg` 指令安装即可完成内核安装 - -```shell -sudo dpkg -i linux-headers-5.10.110-1-rockchip_5.10.110-1_arm64.deb -sudo dpkg -i linux-image-5.10.110-1-rockchip_5.10.110-1_arm64.deb -sudo reboot -``` - -重启完成后可以通过 `uname -a` 查看当前启动的内核版本号来查看是否安装成功 diff --git a/docs/som/nx/nx5/radxa-os/low-level-dev/rk_anti_copy_board.md b/docs/som/nx/nx5/radxa-os/low-level-dev/rk_anti_copy_board.md deleted file mode 100644 index c1f1bd90a..000000000 --- a/docs/som/nx/nx5/radxa-os/low-level-dev/rk_anti_copy_board.md +++ /dev/null @@ -1,18 +0,0 @@ ---- -sidebar_position: 5 -description: "Rockchip 芯片提供防抄板技术，保护客户的固件、私有数据、核心代码。" - -doc_kind: wrapper -source_of_truth: common -imports_resolve_to: - - docs/common/dev/_rk_anti_copy_board.mdx ---- - -import ANTICOPY from '../../../../../common/dev/\_rk_anti_copy_board.mdx' - -# Rockchip 防抄板技术 - -Rockchip 芯片提供防抄板技术，保护客户的固件、私有数据、核心代码。 -防抄板技术主要用于防止客户的固件和私有数据被非授权用户非法拷贝并使用，避免被抄板造成商业上的损失。 - - diff --git a/docs/som/nx/nx5/radxa-os/low-level-dev/rkdeveloptool.md b/docs/som/nx/nx5/radxa-os/low-level-dev/rkdeveloptool.md deleted file mode 100644 index 96f0f9dd0..000000000 --- a/docs/som/nx/nx5/radxa-os/low-level-dev/rkdeveloptool.md +++ /dev/null @@ -1,10 +0,0 @@ ---- -doc_kind: wrapper -source_of_truth: common -imports_resolve_to: - - docs/common/dev/_rkdeveloptool.mdx ---- - -import Rkdeveloptool from "../../../../../common/dev/\_rkdeveloptool.mdx"; - - diff --git a/docs/som/nx/nx5/radxa-os/low-level-dev/rkdevtool.md b/docs/som/nx/nx5/radxa-os/low-level-dev/rkdevtool.md deleted file mode 100644 index 1079cb552..000000000 --- a/docs/som/nx/nx5/radxa-os/low-level-dev/rkdevtool.md +++ /dev/null @@ -1,12 +0,0 @@ ---- -doc_kind: wrapper -source_of_truth: common -imports_resolve_to: - - docs/common/dev/_rkdevtool.mdx ---- - -import RKDevTool from "../../../../../common/dev/\_rkdevtool.mdx" - -# RKDevTool - - diff --git a/docs/som/nx/nx5/radxa-os/low-level-dev/serial.md b/docs/som/nx/nx5/radxa-os/low-level-dev/serial.md deleted file mode 100644 index 6292a0df1..000000000 --- a/docs/som/nx/nx5/radxa-os/low-level-dev/serial.md +++ /dev/null @@ -1,12 +0,0 @@ ---- -doc_kind: wrapper -source_of_truth: common -imports_resolve_to: - - docs/common/general/_serial.mdx ---- - -import Serial from "../../../../../common/general/\_serial.mdx" - -# UART 串口控制台 - - diff --git a/docs/som/nx/nx5/radxa-os/low-level-dev/u-boot.md b/docs/som/nx/nx5/radxa-os/low-level-dev/u-boot.md deleted file mode 100644 index 09c28b08d..000000000 --- a/docs/som/nx/nx5/radxa-os/low-level-dev/u-boot.md +++ /dev/null @@ -1,50 +0,0 @@ ---- -sidebar_position: 2 ---- - -# U-boot - -## 环境配置 - -[bsp](https://github.com/radxa-repo/bsp) 是 Radxa 提供的一套快速构建 U-Boot Kernel 的工具，使用 bsp 非常方便就能构建出自己的 U-Boot 和 Kernel. -下面将为您展示如何使用 bsp 构建 Radxa NX5 IO 的 U-Boot - -[bsp 环境配置](https://radxa-repo.github.io/bsp/) - -## 编译 U-Boot - -完成 bsp 环境配置后，需要先编译一次 U-Boot 才会从仓库拉取相关代码，可以执行`./bsp u-boot rknext radxa-nx5-io`构建 U-Boot, U-Boot 源码的路径位于 bsp 目录下的 `.src/u-boot` - -```shell -cd bsp -mkdir output -cd output -../bsp --no-prepare-source u-boot rknext radxa-nx5-io - -参数说明： ---no-prepare-source # 使用本地修改进行编译，如果不加这个参数将会从 Radxa U-Boot 仓库同步最新代码并覆盖本地修改 -``` - -更多 bsp 参数使用说明可以执行 `./bsp`查看 - -编译完成后会在 bsp/output 目录生成许多 `deb` 包， 只需要安装下面的 `deb` 即可 - -```shell -u-boot-rknext_2017.09-1_arm64.deb -``` - -将上面 `deb` 包复制到板子上使用 `dpkg` 指令安装即可完成 U-Boot 导入 - -```shell -sudo dpkg -i u-boot-rknext_2017.09-1_arm64.deb -``` - -导入完成后需要将 U-Boot 刷到启动介质中 - -```shell -cd /usr/lib/u-boot/radxa-nx5-io/ -sudo ./setup.sh update_bootloader /dev/mmcblk1 #/dev/mmcblk1 为你当前使用的启动介质，需要根据实际使用的设备来选择 -sudo reboot -``` - -重启后可以观察 U-Boot 启动日志查看 U-Boot 是否更新成功 diff --git a/docs/som/nx/nx5/radxa-os/low-level-dev/upgrade-tool.md b/docs/som/nx/nx5/radxa-os/low-level-dev/upgrade-tool.md deleted file mode 100644 index 95fb02636..000000000 --- a/docs/som/nx/nx5/radxa-os/low-level-dev/upgrade-tool.md +++ /dev/null @@ -1,12 +0,0 @@ ---- -doc_kind: wrapper -source_of_truth: common -imports_resolve_to: - - docs/common/dev/_upgrade-tool.mdx ---- - -import UpgradeTool from "../../../../../common/dev/\_upgrade-tool.mdx" - -# upgrade_tool - - diff --git a/docs/som/nx/nx5/radxa-os/mali-gpu.md b/docs/som/nx/nx5/radxa-os/mali-gpu.md deleted file mode 100644 index bb285cc11..000000000 --- a/docs/som/nx/nx5/radxa-os/mali-gpu.md +++ /dev/null @@ -1,12 +0,0 @@ ---- -doc_kind: wrapper -source_of_truth: common -imports_resolve_to: - - docs/common/radxa-os/_mali-gpu.mdx ---- - -import Mali from "../../../../common/radxa-os/\_mali-gpu.mdx"; - -# 切换 GPU 驱动 - - diff --git a/docs/som/nx/nx5/radxa-os/os-usage/README.md b/docs/som/nx/nx5/radxa-os/os-usage/README.md deleted file mode 100644 index 47349f28e..000000000 --- a/docs/som/nx/nx5/radxa-os/os-usage/README.md +++ /dev/null @@ -1,174 +0,0 @@ ---- -sidebar_position: 2 ---- - -import Serial from "../../../../../common/general/\_serial.mdx" - -# 系统使用 - -主要介绍 Radxa OS 系统的基本使用方法，帮助你快速了解常用的系统的配置。 - -## 用户名和密码 - -Radxa ROCK 系列默认添加的用户名和密码为： - -```text -用户名：radxa/rock -密码： radxa/rock -``` - -## 串口登录 - - - -## 设置网络 - -### 连接WiFi - -### 以太网连接 - -## 自动登录 - -为了更快进入桌面，可以设置桌面自动登录,修改 `/etc/lightdm/lightdm.conf` 文件 - -```bash -sudo vim /etc/lightdm/lightdm.conf -找到 [Seat:*] 下的 #autologin-user= ，将这个配置修改为你需要登录的用户 - -[Seat:*] -... -autologin-user=radxa -autologin-user-timeout=0 -... -``` - -## 语言设置 - -1. 安装简体中文字体： - -```bash -sudo apt-get install fonts-wqy-zenhei -``` - -2. 设置系统语言为中文桌面： - -```bash -sudo dpkg-reconfigure locales -``` - -3. 选择中文语言 - -![set language1 ](/img/zero/zero3/set-language1.webp) - -![set language2 ](/img/zero/zero3/set-language2.webp) - -4. 重启系统后即可 - -```bash -sudo reboot -``` - -其他语言的配置可以参照上述配置步骤。 - -## 远程登录 - -### SSH 登录 - -在连接上网络后可以通过 SSH 远程调试，官方Debian 镜像已默认开启 SSH ,只需要获取到板子的 IP 即可使用 SSH 连接。 - -- Debian/Ubuntu - -```bash -ssh [username]@[hostname] -or -ssh [username]@[IP address] -例如： -ssh radxa@192.168.1.100 -输入用户密码后即可连接到Debian系统。 -``` - -- Windows - -Windows 有许多 SSH 工具，这里以 [Mobaxterm](https://mobaxterm.mobatek.net/) 为你展示连接方法 - -点击左上角的 `Session` 新建 SSH 连接，在 `Remote host` 处输入板子的 IP，勾选 `Specify usernema` 并填入登录的用户, 双击会话开始连接后输入登录密码即可连接。 - -![mobaxterm ssh ](/img/zero/zero3/mobaxterm-ssh.webp) - -### VNC 远程桌面 - -- 安装 VNC 服务器 - -1. 安装 TigerVNC Server 和 dbus-x11 依赖项 - -```bash -sudo apt-get update -sudo apt-get install tigervnc-standalone-server -sudo apt-get install dbus-x11 -``` - -2. 安装后完成VNC服务器的初始配置，请使用vncserver命令来设置安全密码并创建初始配置文件： - -```text -vncserver -``` - -:::tip -Would you like to enter a view-only password (y/n)? n 提示是否只是观看，建议选择no，输入n，这样远程就可以操作，而不是仅仅观看，可以自身实际情况选择 -::: - -3. 配置 VNC 服务器 - -```text -vncserver -kill :* -touch ~/.vnc/xstartup -chmod +x ~/.vnc/xstartup -``` - -编辑 `~/.vnc/xstartup`，将下列的配置复制进去并保存 - -```text -#!/bin/sh -unset SESSION_MANAGER -unset DBUS_SESSION_BUS_ADDRESS -unset XDG_RUNTIME_DIR -/etc/X11/xinit/xinitrc -[ -x /etc/vnc/xstartup ] && exec /etc/vnc/xstartup -[ -r $HOME/.Xresources ] && xrdb $HOME/.Xresources -xsetroot -solid grey -#vncconfig -iconic & -startkde & -``` - -4. 配置编辑好后，重新启动VNC服务器： - -```text -vncserver -localhost no -``` - -5. 查看 VNC 服务器 - -```bash -radxa@radxa-zero3:~$ vncserver -list - -TigerVNC server sessions: - -X DISPLAY # RFB PORT # PROCESS ID SERVER -:1 5901 4029 (stale) Xtigervnc -``` - -6. 使用 mobaxterm 连接远程桌面 - -点击左上角的 `Session` 新建 VNC 连接，在 `Remote hostname of IP address` 处输入板子的 IP，Port为 `vncserver -list` 获取到的端口号 - -![mobaxterm vnc ](/img/zero/zero3/mobaxterm-vnc.webp) - -## 音视频 - -## 聊天视频 - -## 游戏 - -## 办公 - -## Android In Container diff --git a/docs/som/nx/nx5/radxa-os/sys-config/README.md b/docs/som/nx/nx5/radxa-os/sys-config/README.md deleted file mode 100644 index 34b6bda35..000000000 --- a/docs/som/nx/nx5/radxa-os/sys-config/README.md +++ /dev/null @@ -1,9 +0,0 @@ ---- -sidebar_position: 3 ---- - -# 系统配置 - -介绍如何通过工具（例如rsetup）或者命令行去使用设备或者功能。 - - diff --git a/docs/som/nx/nx5/radxa-os/sys-config/bootparam.md b/docs/som/nx/nx5/radxa-os/sys-config/bootparam.md deleted file mode 100644 index 8631d7f81..000000000 --- a/docs/som/nx/nx5/radxa-os/sys-config/bootparam.md +++ /dev/null @@ -1,12 +0,0 @@ ---- -doc_kind: wrapper -source_of_truth: common -imports_resolve_to: - - docs/common/radxa-os/_bootparam.mdx ---- - -import Bootparam from "../../../../../common/radxa-os/\_bootparam.mdx"; - -# 启动参数 - - diff --git a/docs/som/nx/nx5/radxa-os/sys-config/rsetup.md b/docs/som/nx/nx5/radxa-os/sys-config/rsetup.md deleted file mode 100644 index 38c698025..000000000 --- a/docs/som/nx/nx5/radxa-os/sys-config/rsetup.md +++ /dev/null @@ -1,10 +0,0 @@ ---- -doc_kind: wrapper -source_of_truth: common -imports_resolve_to: - - docs/common/config/_rsetup.mdx ---- - -import Rsetup from "../../../../../common/config/\_rsetup.mdx"; - - diff --git a/docs/som/nx/nx5/radxa-os/wayland.md b/docs/som/nx/nx5/radxa-os/wayland.md deleted file mode 100644 index f91fc81e4..000000000 --- a/docs/som/nx/nx5/radxa-os/wayland.md +++ /dev/null @@ -1,12 +0,0 @@ ---- -doc_kind: wrapper -source_of_truth: common -imports_resolve_to: - - docs/common/radxa-os/_wayland.mdx ---- - -import Wayland from "../../../../common/radxa-os/\_wayland.mdx"; - -# 开启 Wayland 会话 - - diff --git a/docs/som/nx/nx5/system-use/README.md b/docs/som/nx/nx5/system-use/README.md new file mode 100644 index 000000000..3451b46a7 --- /dev/null +++ b/docs/som/nx/nx5/system-use/README.md @@ -0,0 +1,7 @@ +--- +sidebar_position: 10 +--- + +# 系统使用 + + diff --git a/docs/som/nx/nx5/system-use/appuse.md b/docs/som/nx/nx5/system-use/appuse.md new file mode 100644 index 000000000..8981cb066 --- /dev/null +++ b/docs/som/nx/nx5/system-use/appuse.md @@ -0,0 +1,14 @@ +--- +sidebar_position: 7 + +doc_kind: wrapper +source_of_truth: common +imports_resolve_to: + - docs/common/radxa-os/system-config-debian12/_appuse.mdx +--- + +import AppUse from '../../../../common/radxa-os/system-config-debian12/\_appuse.mdx'; + +# 应用使用 + + diff --git a/docs/som/nx/nx5/system-use/audio.md b/docs/som/nx/nx5/system-use/audio.md new file mode 100644 index 000000000..67ec908cc --- /dev/null +++ b/docs/som/nx/nx5/system-use/audio.md @@ -0,0 +1,14 @@ +--- +sidebar_position: 8 + +doc_kind: wrapper +source_of_truth: common +imports_resolve_to: + - docs/common/radxa-os/system-config-debian12/_audio.mdx +--- + +import Audio from '../../../../common/radxa-os/system-config-debian12/\_audio.mdx'; + +# 音频管理 + +