duplicated diagnostic

[gmdevz]

good day.. My diagnostics are duplicated when using the typescript-tools.nvim (typescript installed globally via npm) and my configs are just as is on how I installed it using Lazy
is that meant to be? Is there a workaround for it?

Thank you in advance.

[pmizio]

@gmmoose20 It shouldn't be like that, besides nvim deduplicate same diagnostics from one server. It looks like you have second one which is running for example standard tsserver from lspconfig. Did you disabled lspcnfig one? Please run :LspInfo to verify you don't have attached any other typescript server.

[gmdevz]

this is my :LspInfo

as for my lspconfig:
tsserver = { enabled = false }
Is there a way to disable it? may be I just didn't do the right way 😅

[pmizio]

If it isn't listed in :LspInfo this mean it is correctly disabled. Followup question, you have it duplicated always and every diagnostic message is duplicated or is it accideutialy - happens from time to time?

If it is from time to time it can be connected with #202 this. Stale one message is stale for some reason, which I don't know yet, and you get duplication. In this case you may try to clear diagnostic using :lua vim.diagnostic.reset(). You may also give a shoot this #223 branch and let me know if it helps.

If it is permanent probably it isn't connected to case described previously, so I need more info:

• nvim version
• typescript version
• ideally project to reproduce

[gmdevz]

nvim -v: NVIM v0.9.5
tsc -v: 5.3.3

I only get the duplicate diagnostic with typescript-tools.nvim but when I remove it and just use the plain extras.typescript from Lazyvim it works just fine.

[pmizio]

Weird, I'll install LazyVim distro and check it with your configuration.
@gmmoose20 can you post how you configure my plugin?

[gmdevz]

here.. under plugins/lsp.lua

  {
    "pmizio/typescript-tools.nvim",
    dependencies = { "nvim-lua/plenary.nvim", "neovim/nvim-lspconfig" },
    opts = {
       on_attach = on_attach,
        settings = {
          tsserver_file_preferences = {
            includeCompletionsForModuleExports = true,
  
            -- inlay hints
            includeInlayParameterNameHints = "literals",
            includeInlayParameterNameHintsWhenArgumentMatchesName = false,
            includeInlayFunctionParameterTypeHints = true,
            includeInlayVariableTypeHints = true,
            includeInlayVariableTypeHintsWhenTypeMatchesName = false,
            includeInlayPropertyDeclarationTypeHints = true,
            includeInlayFunctionLikeReturnTypeHints = true,
            includeInlayEnumMemberValueHints = true,
          },
          tsserver_format_options = {
            allowIncompleteCompletions = false,
            allowRenameOfImportPath = false,
          },
        },
      },
   },

I have my typescript installed via npm globally.

[pmizio]

@gmmoose20 ok so i installed lazyvim to check it and fill my understanding of situation, you have both lazyvim's setting { import = "lazyvim.plugins.extras.lang.typescript" }, and my plugin in the same time and then you get duplicated diagnostic? Then you eg. comment out lazyvim's setting and still have duplicated diagnostic yes?

If both are true my best bet is delete typsecript-language-server from :Mason. When it is installed mason-lspconfig still bootstrap it and probably becouse of this you get this duplications. To do this go to :Mason then press X(capital letter) on typescript-language-server relaunch nvim and let me know it helps.

[gmdevz]

unfortunately still the same, I did try reinstalling fresh lazyvim and only added typescript-tools and still the same it still duplicates the diagnostics.

one thing I notice too is that its saying tsserver.... in diagnostic line but when I'm using just the typescript plugin from lazyvim import it just says typescript... and also when I don't disable tsserver from lspconfig and just have them both, it shows tsserver... and tyescript... so I'll have three the same diagnostics. That's when I knew that it's something in typescript-tools plugin.

[pmizio]

@gmmoose20 Can you make some minimal repo with config which presents error? I cannot reproduce it, tried to install lazyvim by cloning it into my .config/nvim then I just created plugins/lsp.lua then from this file I returned your config posted here and typesciript-tools working correctly no duplications. You can try to follow what I did maybe this show us something. I'm pretty sure it is something in your configuration, because you tell me about 3 different "variables": lazyvim's { import = "..." } thingy, lsp-config(I'm not sure you use it separately) and typescript-tools.
We add lspconfig configuration to typescript-tools under the hood when calling setup so it is possible to some code yours/lazyvim's call it twice.

[gmdevz]

I don't really know why in mine its getting duplicates.

This is a fresh install Lazyvim.
my config at /plugins/lsp.lua:

this what happens when I install typescript globally with :MasonInstall typescript-server-language

as you can see I have three with the same output, when I remove typescript-tools plugin I don't get any duplicates.

[pmizio]

oh, I just noticed you are on windows maybe this is some clue i need to check this

[gmdevz]

may be its something to do with the cmd ?

[gmdevz]

may be its something to do with the cmd ?

I manage to fix my issue with this config:

I don't get duplicates now. So I think its about that cmd: on windows..

hope this helps on debugging the plugin for windows users. :)

[net]

For anyone using mason-lspconfig, mason-lspconfig automatically sets up all LSPs installed with Mason. To work around this, you can configure a setup handler that will return early if server_name == 'tsserver'. See the mason-lspconfig docs for more info.