Skip to content

Latest commit

 

History

History

NETDUINO3_WIFI

Folders and files

NameName
Last commit message
Last commit date

parent directory

..
common
common
 
 
managed_helpers
managed_helpers
 
 
nanoBooter
nanoBooter
 
 
nanoCLR
nanoCLR
 
 
CMakeLists.txt
CMakeLists.txt
 
 
CMakePresets.json
CMakePresets.json
 
 
README.md
README.md
 
 
board.c
board.c
 
 
board.h
board.h
 
 
ffconf.h
ffconf.h
 
 
launch.json
launch.json
 
 
target_BlockStorage.c
target_BlockStorage.c
 
 
target_BlockStorage.h
target_BlockStorage.h
 
 
target_common.c
target_common.c
 
 
target_common.h.in
target_common.h.in
 
 
target_nf_dev_onewire_config.cpp
target_nf_dev_onewire_config.cpp
 
 
target_nf_dev_onewire_config.h
target_nf_dev_onewire_config.h
 
 
target_nf_device_can_config.cpp
target_nf_device_can_config.cpp
 
 
target_nf_device_can_config.h
target_nf_device_can_config.h
 
 
target_system_device_adc_config.cpp
target_system_device_adc_config.cpp
 
 
target_system_device_i2c_config.cpp
target_system_device_i2c_config.cpp
 
 
target_system_device_pwm_config.cpp
target_system_device_pwm_config.cpp
 
 
target_system_device_spi_config.cpp
target_system_device_spi_config.cpp
 
 
target_system_devices_dac_config.cpp
target_system_devices_dac_config.cpp
 
 
target_system_io_ports_config.cpp
target_system_io_ports_config.cpp
 
 
target_system_io_ports_config.h
target_system_io_ports_config.h
 
 
target_windows_storage_config.h
target_windows_storage_config.h
 
 

README.md

Configuration of Chibios, HAL and MCU

In this folder you'll find a 'port' of the nanoframework to work on a WildernessLabs Netduino 3 Wifi board. You can find [here] some more information on the board specifics, used MCU, RAM and FLASH memory available.

NOTE: the configuration was successfully tested on a WildernessLabs NETDUINO3_WIFI board using the Serial over USB connection on USB port 1 that creates a virtual COM port.

ADC configurations

The following ADC channels (and respective GPIO pins) are available to the managed API, in the respective index:

  • PC0, ADC1 IN10
  • PC1 ADC1 IN11
  • PC2 ADC2 IN14
  • PC3 ADC2 IN15
  • PC4 ADC3 IN12
  • PC5 ADC3 IN13
  • Temp Sensor ADC1
  • VrefInt ADC1
  • Vbatt ADC1

These first 6 channels are exposed in the board J4 connector as A0 to A5.

Floating point

The current build is set to add support for single-precision floating point. Meaning that System.Math API supports only the float overloads. The double ones will throw a NotImplementedException.