Skip to content

Latest commit

 

History

History

MBN_QUAIL

Folders and files

NameName
Last commit message
Last commit date

parent directory

..
common
common
 
 
nanoBooter
nanoBooter
 
 
nanoCLR
nanoCLR
 
 
CMakeLists.txt
CMakeLists.txt
 
 
CMakePresets.json
CMakePresets.json
 
 
README.md
README.md
 
 
board.c
board.c
 
 
board.h
board.h
 
 
ffconf.h
ffconf.h
 
 
launch.json
launch.json
 
 
target_BlockStorage.c
target_BlockStorage.c
 
 
target_BlockStorage.h
target_BlockStorage.h
 
 
target_common.c
target_common.c
 
 
target_common.h.in
target_common.h.in
 
 
target_nf_dev_onewire_config.cpp
target_nf_dev_onewire_config.cpp
 
 
target_nf_dev_onewire_config.h
target_nf_dev_onewire_config.h
 
 
target_system_device_i2c_config.cpp
target_system_device_i2c_config.cpp
 
 
target_system_device_pwm_config.cpp
target_system_device_pwm_config.cpp
 
 
target_system_device_spi_config.cpp
target_system_device_spi_config.cpp
 
 
target_system_devices_dac_config.cpp
target_system_devices_dac_config.cpp
 
 
target_system_io_ports_config.cpp
target_system_io_ports_config.cpp
 
 
target_system_io_ports_config.h
target_system_io_ports_config.h
 
 
target_windows_storage_config.h
target_windows_storage_config.h
 
 

README.md

This board is now old and has no owner. As such, it may not work out of the box.

mbn quail board

Configuration of Chibios, HAL and MCU

For a successful build the following changes are required:

In halconf.g (in both nanoBooter and nanoCLR folders), when compared with a default file:

  • HAL_USE_SERIAL to TRUE
  • HAL_USE_SERIAL_USB to TRUE
  • HAL_USE_USB to TRUE
  • SERIAL_DEFAULT_BITRATE to 921600

In mcuconf.h (in both nanoBooter and nanoCLR folders), when compared with a default file:

  • STM32_SERIAL_USE_USART2 to TRUE
  • STM32_USB_USE_OTG1 to TRUE

In chconf.h (only for nanoCLR folder), when compared with a default file:

  • set the CORTEX_VTOR_INIT with the appropriate address of the vector table for nanoCLR

Definitions for each image

Any defines specific to an image (nanoBooter or nanoCLR) that are to be made available throughout the code should be added to the target_board.h.in. There is one in nanoBooter and another in nanoCLR directories, allowing different defines for each one. Defines that are common to a target board should be added to the target_common.h.in. The content of these files is parsed by CMake. It can include CMake variables. Check the documentation of CMake config files here.

NOTE: this configuration was successfully tested in a ST_STM32F4_DISCOVERY board using the Serial over USB connection on USB port 1 that creates a virtual COM port.

Floating point

The current build is set to add support for single-precision floating point. Meaning that System.Math API supports only the float overloads. The double ones will throw a NotImplementedException.