Shelly HomeKit 2.13.1
Support
If you use and enjoy the firmware please consider a donation to support further development.
Changelog
Important: This release deliberately breaks the upgrade path from Shelly HomeKit 2.12.X for any Plus Devices (those are: +1, +1PM, +i4, +2PM, +RGBWPM, +PlugS). The reason for this is to support direct upgrade from newest stock firmware (1.4.X), that uses a changed partition layout.
To upgrade current "Shelly HomeKit" devices to this release the valid upgrade path is to:
- Revert to Stock 1.3.3 (Hit the revert button in webui).
Note there is a known issue in some cases that requires a reset of the device see #1547 for details. Look also there if you want to provide data that maybe would help to find the reason for this problem. - Upgrade Stock to current release (1.4.X, this will change partition layout)
- Upgrade back to Shelly HomeKit Firmware (via the /ota Link) Sometimes the Stock Shelly has to be rebooted before the update works.
Your HomeKit configuration/pairing is not lost during this upgrade process. Other/wrong upgrade paths will yield an error during updating, but no harm is done if a wrong firmware is selected.
Please still only do this if you accept the risk to loose your config in case you need to reset
It should be possible to add the above procedure into the python update tool (flash-shelly.py) in the future for an automated way to upgrade old Shelly HomeKit devices. If anyone can help here this would be much appreciated.
Fixes
- Avoid Crashloop in conjunction with Sensor Swap on GDO
- Allow Decimals in Offset correction for sensors
Full Changelog: 2.13.0...2.13.1