improve power meter #1197
improve power meter #1197
Conversation
timoschilling
force-pushed
the
improve-pm
branch
from
c2a574c to
25277ce
Compare
|
Here is a pre-release build with the changes from this PR. Would be cool to get some feedback. shelly-homekit-ShellyPlus1PM.zip Please leave a note if I missed a device with power management. // cc rs38 |
|
I use a an app "HomeDash" and the led living room lights "consumption"
reports 26w not reporting any KwH.
Before your update HomeDash did not report consumption figure for shelly
modules.
Ran the Eve app it also reports "consumption" 26w with no KwH total reported
Not sure if this is relevant I put in place a Firewall rule to block all
IoT devices from contacting the Internet,
If I look at the firewall log I see many of my devices attempting to
contact an NTP server.
…On Sat, 21 Jan 2023 at 20:21, Timo Schilling ***@***.***> wrote:
Here is a pre-release build with the changes from this PR. Would be cool
to get some feedback.
Note: From my point of view the Eve app is rounding current power
consumption to an int value, in other HomeKit apps I can see float values
with this firmware.
shelly-homekit-ShellyPlus1PM.zip
<https://github.com/mongoose-os-apps/shelly-homekit/files/10472965/shelly-homekit-ShellyPlus1PM.zip>
shelly-homekit-ShellyPlugS.zip
<https://github.com/mongoose-os-apps/shelly-homekit/files/10472967/shelly-homekit-ShellyPlugS.zip>
shelly-homekit-ShellyPlug.zip
<https://github.com/mongoose-os-apps/shelly-homekit/files/10472968/shelly-homekit-ShellyPlug.zip>
shelly-homekit-Shelly25.zip
<https://github.com/mongoose-os-apps/shelly-homekit/files/10472969/shelly-homekit-Shelly25.zip>
shelly-homekit-Shelly1PM.zip
<https://github.com/mongoose-os-apps/shelly-homekit/files/10472970/shelly-homekit-Shelly1PM.zip>
Please leave a note if I missed a device with power management.
// cc rs38 <https://github.com/rs38>
—
Reply to this email directly, view it on GitHub
<#1197 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/ARF3VCCP2L6HN5IOWS4CS3TWTRAMRANCNFSM6AAAAAAUCB2A6M>
.
You are receiving this because you are subscribed to this thread.Message
ID: ***@***.***>
|
|
@5xPa what Shelly do you use? |
|
Shelly 2.5
System
Model: Shelly25
Device ID: shellyswitch25-001A83
Host: LivRoomLights.local
Uptime: 0:15:05:59
Temperature: 54°C
Debug Log: Log <http://192.168.0.176/debug/log?follow=1>
…On Sun, 22 Jan 2023 at 11:03, Timo Schilling ***@***.***> wrote:
@5xPa <https://github.com/5xPa> what Shelly do you use?
—
Reply to this email directly, view it on GitHub
<#1197 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/ARF3VCETHFQQDPFWRGUUHN3WTUHYRANCNFSM6AAAAAAUCB2A6M>
.
You are receiving this because you were mentioned.Message ID:
***@***.***>
|
|
sorry for answering so late, your provided prereleases has the same version as the old the local UI now shows 1 decimal but the HK or Eve still show an Integer. |
|
Test with a LED lamp dimmable 0-8W: should also add that in my case the consumption shown in the local UI (of a LED lamp dimmable 0-6W) is obviously skipping all decimals other than x.1 and x.0 and the original shelly firmware shows kind of random fake or "noise" decimals and the internal resolution of the sensor is obviously only ~1W. |
No description provided.