Run script build phase '[CP-User] [Hermes] Replace Hermes for the right configuration, if needed' will be run during every build because it does not specify any outputs. To address this issue, either add output dependencies to the script phase, or configure it to run in every build by unchecking "Based on dependency analysis" in the script phase. (in target 'hermes-engine' from project 'Pods')

'ReactNativeHost+View.o' has no symbols

'ReactNativeHost+View.o' has no symbols

ISO C++ requires field designators to be specified in declaration order; field 'bottom' will be initialized after field 'right' [-Wreorder-init-list]

ISO C++ requires field designators to be specified in declaration order; field 'left' will be initialized after field 'bottom' [-Wreorder-init-list]

ISO C++ requires field designators to be specified in declaration order; field 'bottom' will be initialized after field 'right' [-Wreorder-init-list]

ISO C++ requires field designators to be specified in declaration order; field 'left' will be initialized after field 'bottom' [-Wreorder-init-list]

'States.o' has no symbols

'States.o' has no symbols

The following taps are not trusted: aws/tap Homebrew is currently ignoring formulae, casks and commands from these taps because tap trust is required. Untap them with: brew untap aws/tap Trust specific formulae, casks and commands with: brew trust --formula <user>/<tap>/<formula> brew trust --cask <user>/<tap>/<cask> brew trust --command <user>/<tap>/<command> Whole-tap trust is broader and includes all current and future formulae, casks and commands from the listed taps. Trust whole taps with: brew trust aws/tap To disable trust checks: export HOMEBREW_NO_REQUIRE_TAP_TRUST=1 This is not recommended and will be removed in a later release. For more information, see: https://docs.brew.sh/Tap-Trust

'ReactNativeHost+View.o' has no symbols

'ReactNativeHost+View.o' has no symbols

ISO C++ requires field designators to be specified in declaration order; field 'bottom' will be initialized after field 'right' [-Wreorder-init-list]

ISO C++ requires field designators to be specified in declaration order; field 'left' will be initialized after field 'bottom' [-Wreorder-init-list]

ISO C++ requires field designators to be specified in declaration order; field 'bottom' will be initialized after field 'right' [-Wreorder-init-list]

ISO C++ requires field designators to be specified in declaration order; field 'left' will be initialized after field 'bottom' [-Wreorder-init-list]

'EventEmitters-7788619e1ef350feed5f4513c65bd7c3.o' has no symbols

'EventEmitters-7788619e1ef350feed5f4513c65bd7c3.o' has no symbols

Run script build phase '[CP-User] [Hermes] Replace Hermes for the right configuration, if needed' will be run during every build because it does not specify any outputs. To address this issue, either add output dependencies to the script phase, or configure it to run in every build by unchecking "Based on dependency analysis" in the script phase. (in target 'hermes-engine' from project 'Pods')

The following taps are not trusted: aws/tap Homebrew is currently ignoring formulae, casks and commands from these taps because tap trust is required. Untap them with: brew untap aws/tap Trust specific formulae, casks and commands with: brew trust --formula <user>/<tap>/<formula> brew trust --cask <user>/<tap>/<cask> brew trust --command <user>/<tap>/<command> Whole-tap trust is broader and includes all current and future formulae, casks and commands from the listed taps. Trust whole taps with: brew trust aws/tap To disable trust checks: export HOMEBREW_NO_REQUIRE_TAP_TRUST=1 This is not recommended and will be removed in a later release. For more information, see: https://docs.brew.sh/Tap-Trust

The following taps are not trusted: aws/tap Homebrew is currently ignoring formulae, casks and commands from these taps because tap trust is required. Untap them with: brew untap aws/tap Trust specific formulae, casks and commands with: brew trust --formula <user>/<tap>/<formula> brew trust --cask <user>/<tap>/<cask> brew trust --command <user>/<tap>/<command> Whole-tap trust is broader and includes all current and future formulae, casks and commands from the listed taps. Trust whole taps with: brew trust aws/tap To disable trust checks: export HOMEBREW_NO_REQUIRE_TAP_TRUST=1 This is not recommended and will be removed in a later release. For more information, see: https://docs.brew.sh/Tap-Trust

The following taps are not trusted: aws/tap Homebrew is currently ignoring formulae, casks and commands from these taps because tap trust is required. Untap them with: brew untap aws/tap Trust specific formulae, casks and commands with: brew trust --formula <user>/<tap>/<formula> brew trust --cask <user>/<tap>/<cask> brew trust --command <user>/<tap>/<command> Whole-tap trust is broader and includes all current and future formulae, casks and commands from the listed taps. Trust whole taps with: brew trust aws/tap To disable trust checks: export HOMEBREW_NO_REQUIRE_TAP_TRUST=1 This is not recommended and will be removed in a later release. For more information, see: https://docs.brew.sh/Tap-Trust

The following taps are not trusted: aws/tap Homebrew is currently ignoring formulae, casks and commands from these taps because tap trust is required. Untap them with: brew untap aws/tap Trust specific formulae, casks and commands with: brew trust --formula <user>/<tap>/<formula> brew trust --cask <user>/<tap>/<cask> brew trust --command <user>/<tap>/<command> Whole-tap trust is broader and includes all current and future formulae, casks and commands from the listed taps. Trust whole taps with: brew trust aws/tap To disable trust checks: export HOMEBREW_NO_REQUIRE_TAP_TRUST=1 This is not recommended and will be removed in a later release. For more information, see: https://docs.brew.sh/Tap-Trust

'RCTModalHostView.o' has no symbols

'RCTConvert+CoreLocation.o' has no symbols

'CSSDummy.o' has no symbols

'ReactPerfettoCategories.o' has no symbols

'FuseboxPerfettoDataSource.o' has no symbols

'RCTDeprecation.o' has no symbols

'react_native_assert.o' has no symbols

'OSCompatWindows.o' has no symbols

'ShadowTreeRevisionConsistencyManager.o' has no symbols

Run script build phase '[CP-User] [Hermes] Replace Hermes for the right configuration, if needed' will be run during every build because it does not specify any outputs. To address this issue, either add output dependencies to the script phase, or configure it to run in every build by unchecking "Based on dependency analysis" in the script phase. (in target 'hermes-engine' from project 'Pods')

The following taps are not trusted: aws/tap Homebrew is currently ignoring formulae, casks and commands from these taps because tap trust is required. Untap them with: brew untap aws/tap Trust specific formulae, casks and commands with: brew trust --formula <user>/<tap>/<formula> brew trust --cask <user>/<tap>/<cask> brew trust --command <user>/<tap>/<command> Whole-tap trust is broader and includes all current and future formulae, casks and commands from the listed taps. Trust whole taps with: brew trust aws/tap To disable trust checks: export HOMEBREW_NO_REQUIRE_TAP_TRUST=1 This is not recommended and will be removed in a later release. For more information, see: https://docs.brew.sh/Tap-Trust

'RCTModalHostView.o' has no symbols

'RCTConvert+CoreLocation.o' has no symbols

'CSSDummy.o' has no symbols

'ReactPerfettoCategories.o' has no symbols

'FuseboxPerfettoDataSource.o' has no symbols

'RCTDeprecation.o' has no symbols

'react_native_assert.o' has no symbols

'OSCompatWindows.o' has no symbols

'ShadowTreeRevisionConsistencyManager.o' has no symbols

The following taps are not trusted: aws/tap Homebrew is currently ignoring formulae, casks and commands from these taps because tap trust is required. Untap them with: brew untap aws/tap Trust specific formulae, casks and commands with: brew trust --formula <user>/<tap>/<formula> brew trust --cask <user>/<tap>/<cask> brew trust --command <user>/<tap>/<command> Whole-tap trust is broader and includes all current and future formulae, casks and commands from the listed taps. Trust whole taps with: brew trust aws/tap To disable trust checks: export HOMEBREW_NO_REQUIRE_TAP_TRUST=1 This is not recommended and will be removed in a later release. For more information, see: https://docs.brew.sh/Tap-Trust

'FuseboxPerfettoDataSource.o' has no symbols

'RCTDeprecation.o' has no symbols

'RCTDeprecation.o' has no symbols

'react_native_assert.o' has no symbols

'OSCompatWindows.o' has no symbols

'react_native_assert.o' has no symbols

'OSCompatWindows.o' has no symbols

'ShadowTreeRevisionConsistencyManager.o' has no symbols

'ShadowTreeRevisionConsistencyManager.o' has no symbols

Run script build phase '[CP-User] [Hermes] Replace Hermes for the right configuration, if needed' will be run during every build because it does not specify any outputs. To address this issue, either add output dependencies to the script phase, or configure it to run in every build by unchecking "Based on dependency analysis" in the script phase. (in target 'hermes-engine' from project 'Pods')