DEBUG: test scenario for confirm image after an OTA - THIS COMMIT WILL BE DELETED

Signed-off-by: Almir Okato <[email protected]>

Author: almir-okato

boot/espressif/hal/include/esp32s3/sdkconfig.h

@@ -22,7 +22,7 @@
 #define CONFIG_ESP_CONSOLE_UART_BAUDRATE 115200
 #define CONFIG_BOOTLOADER_OFFSET_IN_FLASH 0x0000
 #define CONFIG_PARTITION_TABLE_OFFSET 0x10000
-#define CONFIG_EFUSE_VIRTUAL_OFFSET 0x250000
+#define CONFIG_EFUSE_VIRTUAL_OFFSET 0x3FF000
 #define CONFIG_EFUSE_VIRTUAL_SIZE 0x2000
 #define CONFIG_EFUSE_MAX_BLK_LEN 256
 #define CONFIG_BOOTLOADER_FLASH_XMC_SUPPORT 1

boot/espressif/port/esp32s3/bootloader.conf

@@ -6,15 +6,15 @@
 # CONFIG_ESP_BOOT_SWAP_USING_MOVE=y
 # CONFIG_ESP_BOOT_UPGRADE_ONLY=y
 
-CONFIG_ESP_FLASH_SIZE=4MB
+CONFIG_ESP_FLASH_SIZE=8MB
 CONFIG_ESP_BOOTLOADER_SIZE=0xF000
 CONFIG_ESP_BOOTLOADER_OFFSET=0x0000
-CONFIG_ESP_IMAGE0_PRIMARY_START_ADDRESS=0x10000
-CONFIG_ESP_APPLICATION_SIZE=0x100000
-CONFIG_ESP_IMAGE0_SECONDARY_START_ADDRESS=0x110000
+CONFIG_ESP_IMAGE0_PRIMARY_START_ADDRESS=0x20000
+CONFIG_ESP_APPLICATION_SIZE=0x150000
+CONFIG_ESP_IMAGE0_SECONDARY_START_ADDRESS=0x170000
 CONFIG_ESP_MCUBOOT_WDT_ENABLE=y
-CONFIG_ESP_SCRATCH_OFFSET=0x210000
-CONFIG_ESP_SCRATCH_SIZE=0x40000
+CONFIG_ESP_SCRATCH_OFFSET=0x3E0000
+CONFIG_ESP_SCRATCH_SIZE=0x1F000
 
 # When enabled, prevents updating image to an older version
 # CONFIG_ESP_DOWNGRADE_PREVENTION=y
@@ -99,13 +99,13 @@ CONFIG_ESP_CONSOLE_UART_NUM=0
 # CONFIG_SECURE_BOOT_SUPPORTS_RSA=1
 
 # Hardware Flash Encryption related options
-# CONFIG_SECURE_FLASH_ENC_ENABLED=1
-# CONFIG_SECURE_FLASH_UART_BOOTLOADER_ALLOW_ENC=1
-# CONFIG_SECURE_FLASH_UART_BOOTLOADER_ALLOW_DEC=1
-# CONFIG_SECURE_FLASH_UART_BOOTLOADER_ALLOW_CACHE=1
-# CONFIG_SECURE_FLASH_ENCRYPTION_MODE_DEVELOPMENT=1
-# CONFIG_SECURE_BOOT_ALLOW_JTAG=1
-# CONFIG_SECURE_BOOT_ALLOW_ROM_BASIC=1
+CONFIG_SECURE_FLASH_ENC_ENABLED=1
+CONFIG_SECURE_FLASH_UART_BOOTLOADER_ALLOW_ENC=1
+CONFIG_SECURE_FLASH_UART_BOOTLOADER_ALLOW_DEC=1
+CONFIG_SECURE_FLASH_UART_BOOTLOADER_ALLOW_CACHE=1
+CONFIG_SECURE_FLASH_ENCRYPTION_MODE_DEVELOPMENT=1
+CONFIG_SECURE_BOOT_ALLOW_JTAG=1
+CONFIG_SECURE_BOOT_ALLOW_ROM_BASIC=1
 
 # Options for enabling eFuse emulation in Flash
 # CONFIG_EFUSE_VIRTUAL=1