saltbeat.full.yml

#================================ General =====================================

# The name of the shipper that publishes the network data. It can be used to group
# all the transactions sent by a single shipper in the web interface.
# If this options is not defined, the hostname is used.
#name:

# The tags of the shipper are included in their own field with each
# transaction published. Tags make it easy to group servers by different
# logical properties.
#tags: ["service-X", "web-tier"]

# Optional fields that you can specify to add additional information to the
# output. Fields can be scalar values, arrays, dictionaries, or any nested
# combination of these.
#fields:
#  env: staging

# If this option is set to true, the custom fields are stored as top-level
# fields in the output document instead of being grouped under a fields
# sub-dictionary. Default is false.
#fields_under_root: false

# Uncomment the following if you want to ignore transactions created
# by the server on which the shipper is installed. This option is useful
# to remove duplicates if shippers are installed on multiple servers.
#ignore_outgoing: true

# How often (in seconds) shippers are publishing their IPs to the topology map.
# The default is 10 seconds.
#refresh_topology_freq: 10

# Expiration time (in seconds) of the IPs published by a shipper to the topology map.
# All the IPs will be deleted afterwards. Note, that the value must be higher than
# refresh_topology_freq. The default is 15 seconds.
#topology_expire: 15

# Internal queue size for single events in processing pipeline
#queue_size: 1000

# Sets the maximum number of CPUs that can be executing simultaneously. The
# default is the number of logical CPUs available in the system.
#max_procs:

#================================ Filters =====================================

# This section defines a list of filtering rules that are applied one by one
# starting with the exported event:
#
#   event -> filter1 -> event1 -> filter2 ->event2 ...
#
# Supported actions: drop_fields, drop_event, include_fields
#
# For example, the following filter configuration uses multiple actions to keep
# the fields that contain CPU load percentages, but remove the fields that
# contain CPU ticks values:
#
#filters:
#- include_fields:
#    fields: ["cpu"]
#- drop_fields:
#    fields: ["cpu.user", "cpu.system"]
#
# The following example drops the events that have the HTTP response code 200:
#
#filters:
#- drop_event:
#    equals:
#       http.code: 200
#

#================================ Outputs =====================================

# Configure what outputs to use when sending the data collected by the beat.
# Multiple outputs may be used.

#-------------------------- Elasticsearch output ------------------------------
output.elasticsearch:
  # Array of hosts to connect to.
  # Scheme and port can be left out and will be set to the default (http and 9200)
  # In case you specify and additional path, the scheme is required: http://localhost:9200/path
  # IPv6 addresses should always be defined as: https://[2001:db8::1]:9200
  hosts: ["localhost:9200"]

  # Set gzip compression level.
  #compression_level: 0

  # Optional protocol and basic auth credentials.
  #protocol: "https"
  #username: "admin"
  #password: "s3cr3t"

  # Dictionary of HTTP parameters to pass within the url with index operations.
  #parameters:
    #param1: value1
    #param2: value2

  # Number of workers per Elasticsearch host.
  #worker: 1

  # Optional index name. The default is "saltbeat" and generates
  # [saltbeat-]YYYY.MM.DD keys.
  #index: "saltbeat"

  # Optional HTTP Path
  #path: "/elasticsearch"

  # Proxy server url
  #proxy_url: http://proxy:3128

  # The number of times a particular Elasticsearch index operation is attempted. If
  # the indexing operation doesn't succeed after this many retries, the events are
  # dropped. The default is 3.
  #max_retries: 3

  # The maximum number of events to bulk in a single Elasticsearch bulk API index request.
  # The default is 50.
  #bulk_max_size: 50

  # Configure http request timeout before failing an request to Elasticsearch.
  #timeout: 90

  # The number of seconds to wait for new events between two bulk API index requests.
  # If `bulk_max_size` is reached before this interval expires, addition bulk index
  # requests are made.
  #flush_interval: 1s

  # Boolean that sets if the topology is kept in Elasticsearch. The default is
  # false. This option makes sense only for Packetbeat.
  #save_topology: false

  # The time to live in seconds for the topology information that is stored in
  # Elasticsearch. The default is 15 seconds.
  #topology_expire: 15

  # A template is used to set the mapping in Elasticsearch
  # By default template loading is enabled and the template is loaded.
  # These settings can be adjusted to load your own template or overwrite existing ones

  # Template name. By default the template name is saltbeat.
  template.name: "saltbeat"

  # Path to template file
  template.path: "saltbeat.template.json"

  # Overwrite existing template
  template.overwrite: false

  # TLS configuration. By default is off.
  # List of root certificates for HTTPS server verifications
  #tls.certificate_authorities: ["/etc/pki/root/ca.pem"]

  # Certificate for TLS client authentication
  #tls.certificate: "/etc/pki/client/cert.pem"

  # Client Certificate Key
  #tls.certificate_key: "/etc/pki/client/cert.key"

  # Controls whether the client verifies server certificates and host name.
  # If insecure is set to true, all server host names and certificates will be
  # accepted. In this mode TLS based connections are susceptible to
  # man-in-the-middle attacks. Use only for testing.
  #tls.insecure: true

  # Configure cipher suites to be used for TLS connections
  #tls.cipher_suites: []

  # Configure curve types for ECDHE based cipher suites
  #tls.curve_types: []

  # Configure minimum TLS version allowed for connection to logstash
  #tls.min_version: 1.0

  # Configure maximum TLS version allowed for connection to logstash
  #tls.max_version: 1.2


#----------------------------- Logstash output --------------------------------
#output.logstash:
  # The Logstash hosts
  #hosts: ["localhost:5044"]

  # Number of workers per Logstash host.
  #worker: 1

  # Set gzip compression level.
  #compression_level: 3

  # Optional load balance the events between the Logstash hosts
  #loadbalance: true

  # Number of batches to be send asynchronously to logstash while processing
  # new batches.
  #pipelining: 0

  # Optional index name. The default index name is set to name of the beat
  # in all lowercase.
  #index: saltbeat

  # SOCKS5 proxy server URL
  #proxy_url: socks5://user:password@socks5-server:2233

  # Resolve names locally when using a proxy server. Defaults to false.
  #proxy_use_local_resolver: false

  # Optional TLS configuration options. TLS is off by default.
  # List of root certificates for HTTPS server verifications
  #tls.certificate_authorities: ["/etc/pki/root/ca.pem"]

  # Certificate for TLS client authentication
  #tls.certificate: "/etc/pki/client/cert.pem"

  # Client Certificate Key
  #tls.certificate_key: "/etc/pki/client/cert.key"

  # Controls whether the client verifies server certificates and host name.
  # If insecure is set to true, all server host names and certificates will be
  # accepted. In this mode TLS based connections are susceptible to
  # man-in-the-middle attacks. Use only for testing.
  #tls.insecure: true

  # Configure cipher suites to be used for TLS connections
  #tls.cipher_suites: []

  # Configure curve types for ECDHE based cipher suites
  #tls.curve_types: []

#------------------------------- Kafka output ---------------------------------
#output.kafka:
  # The list of Kafka broker addresses from where to fetch the cluster metadata.
  # The cluster metadata contain the actual Kafka brokers events are published
  # to.
  #hosts: ["localhost:9092"]

  # The Kafka topic used for produced events. If use_type is set to true, the
  # topic will not be used.
  #topic: beats

  # Set Kafka topic by event type. If use_type is false, the topic option must
  # be configured. The default is false.
  #use_type: false

  # The number of concurrent load-balanced Kafka output workers.
  #worker: 1

  # The number of times to retry publishing an event after a publishing failure.
  # After the specified number of retries, the events are typically dropped.
  # Some Beats, such as Filebeat, ignore the max_retries setting and retry until
  # all events are published.  Set max_retries to a value less than 0 to retry
  # until all events are published. The default is 3.
  #max_retries: 3

  # The maximum number of events to bulk in a single Kafka request. The default
  # is 2048.
  #bulk_max_size: 2048

  # The number of seconds to wait for responses from the Kafka brokers before
  # timing out. The default is 30s.
  #timeout: 30s

  # The maximum duration a broker will wait for number of required ACKs. The
  # default is 10s.
  #broker_timeout: 10s

  # The number of messages buffered for each Kafka broker. The default is 256.
  #channel_buffer_size: 256

  # The keep-alive period for an active network connection. If 0s, keep-alives
  # are disabled. The default is 0 seconds.
  #keep_alive: 0

  # Sets the output compression codec. Must be one of none, snappy and gzip. The
  # default is gzip.
  #compression: gzip

  # The maximum permitted size of JSON-encoded messages. Bigger messages will be
  # dropped. The default value is 1000000 (bytes). This value should be equal to
  # or less than the broker's message.max.bytes.
  #max_message_bytes: 1000000

  # The ACK reliability level required from broker. 0=no response, 1=wait for
  # local commit, -1=wait for all replicas to commit. The default is 1.  Note:
  # If set to 0, no ACKs are returned by Kafka. Messages might be lost silently
  # on error.
  #required_acks: 1

  # The number of seconds to wait for new events between two producer API calls.
  #flush_interval: 1s

  # The configurable ClientID used for logging, debugging, and auditing
  # purposes.  The default is "beats".
  #client_id: beats

  # Optional TLS configuration options. TLS is off by default.
  # List of root certificates for HTTPS server verifications
  #tls.certificate_authorities: ["/etc/pki/root/ca.pem"]

  # Certificate for TLS client authentication
  #tls.certificate: "/etc/pki/client/cert.pem"

  # Client Certificate Key
  #tls.certificate_key: "/etc/pki/client/cert.key"

  # Controls whether the client verifies server certificates and host name.
  # If insecure is set to true, all server host names and certificates will be
  # accepted. In this mode TLS based connections are susceptible to
  # man-in-the-middle attacks. Use only for testing.
  #tls.insecure: true

  # Configure cipher suites to be used for TLS connections
  #tls.cipher_suites: []

  # Configure curve types for ECDHE based cipher suites
  #tls.curve_types: []

#------------------------------- Redis output ---------------------------------
#output.redis:
  # The list of Redis servers to connect to. If load balancing is enabled, the
  # events are distributed to the servers in the list. If one server becomes
  # unreachable, the events are distributed to the reachable servers only.
  #hosts: ["localhost:6379"]

  # The Redis port to use if hosts does not contain a port number. The default
  # is 6379.
  #port: 6379

  # The name of the Redis list or channel the events are published to. The
  # default is saltbeat.
  #index: saltbeat

  # The password to authenticate with. The default is no authentication.
  #password:

  # The Redis database number where the events are published. The default is 0.
  #db: 0

  # The Redis data type to use for publishing events. If the data type is list,
  # the Redis RPUSH command is used. If the data type is channel, the Redis
  # PUBLISH command is used. The default value is list.
  #datetype: list

  # The Redis host to connect to when using topology map support. Topology map
  # support is disabled if this option is not set.
  #host_topology:

  # The password to use for authenticating with the Redis topology server. The
  # default is no authentication.
  #password_topology:

  # The Redis database number where the topology information is stored. The
  # default is 1.
  #db_topology: 1

  # The number of workers to use for each host configured to publish events to
  # Redis. Use this setting along with the loadbalance option. For example, if
  # you have 2 hosts and 3 workers, in total 6 workers are started (3 for each
  # host).
  #worker: 1

  # If set to true and multiple hosts or workers are configured, the output
  # plugin load balances published events onto all Redis hosts. If set to false,
  # the output plugin sends all events to only one host (determined at random)
  # and will switch to another host if the currently selected one becomes
  # unreachable. The default value is true.
  #loadbalance: true

  # The Redis connection timeout in seconds. The default is 5 seconds.
  #timeout: 5s

  # The number of times to retry publishing an event after a publishing failure.
  # After the specified number of retries, the events are typically dropped.
  # Some Beats, such as Filebeat, ignore the max_retries setting and retry until
  # all events are published. Set max_retries to a value less than 0 to retry
  # until all events are published. The default is 3.
  #max_retries: 3

  # The maximum number of events to bulk in a single Redis request or pipeline.
  # The default is 2048.
  #bulk_max_size: 2048

  # The URL of the SOCKS5 proxy to use when connecting to the Redis servers. The
  # value must be a URL with a scheme of socks5://.
  #proxy_url:

  # This option determines whether Redis hostnames are resolved locally when
  # using a proxy. The default value is false, which means that name resolution
  # occurs on the proxy server.
  #proxy_use_local_resolver: false

  # Optional TLS configuration options. TLS is off by default.
  # List of root certificates for HTTPS server verifications
  #tls.certificate_authorities: ["/etc/pki/root/ca.pem"]

  # Certificate for TLS client authentication
  #tls.certificate: "/etc/pki/client/cert.pem"

  # Client Certificate Key
  #tls.certificate_key: "/etc/pki/client/cert.key"

  # Controls whether the client verifies server certificates and host name.
  # If insecure is set to true, all server host names and certificates will be
  # accepted. In this mode TLS based connections are susceptible to
  # man-in-the-middle attacks. Use only for testing.
  #tls.insecure: true

  # Configure cipher suites to be used for TLS connections
  #tls.cipher_suites: []

  # Configure curve types for ECDHE based cipher suites
  #tls.curve_types: []

#------------------------------- File output ----------------------------------
#output.file:
  # Path to the directory where to save the generated files. The option is
  # mandatory.
  #path: "/tmp/saltbeat"

  # Name of the generated files. The default is `saltbeat` and it generates
  # files: `saltbeat`, `saltbeat.1`, `saltbeat.2`, etc.
  #filename: saltbeat

  # Maximum size in kilobytes of each file. When this size is reached, and on
  # every saltbeat restart, the files are rotated. The default value is 10240
  # kB.
  #rotate_every_kb: 10000

  # Maximum number of files under path. When this number of files is reached,
  # the oldest file is deleted and the rest are shifted from last to first. The
  # default is 7 files.
  #number_of_files: 7


#----------------------------- Console output ---------------------------------
#output.console:
  # Pretty print json event
  #pretty: false

#================================= Paths ======================================

# The home path for the saltbeat installation. This is the default base path
# for all other path settings and for miscellaneous files that come with the
# distribution (for example, the sample dashboards).
# If not set by a CLI flag or in the configuration file, the default for the
# home path is the location of the binary.
#path.home:

# The configuration path for the saltbeat installation. This is the default
# base path for configuration files, including the main YAML configuration file
# and the Elasticsearch template file. If not set by a CLI flag or in the
# configuration file, the default for the configuration path is the home path.
#path.config:

# The data path for the saltbeat installation. This is the default base path
# for all the files in which saltbeat needs to store its data. If not set by a
# CLI flag or in the configuration file, the default for the data path is a data
# subdirectory inside the home path.
#path.data:

# The logs path for a saltbeat installation. This is the default location for
# the Beat's log files. If not set by a CLI flag or in the configuration file,
# the default for the logs path is a logs subdirectory inside the home path.
#path.logs:

#================================ Logging =====================================
# There are three options for the log output: syslog, file, stderr.
# Under Windows systems, the log files are per default sent to the file output,
# under all other system per default to syslog.

# Sets log level. The default log level is error.
# Available log levels are: critical, error, warning, info, debug
#logging.level: error

# Enable debug output for selected components. To enable all selectors use ["*"]
# Other available selectors are beat, publish, service
# Multiple selectors can be chained.
#logging.selectors: [ ]

# Send all logging output to syslog. The default is false.
#logging.to_syslog: true

# Logging to rotating files files. Set logging.to_files to false to disable logging to
# files.
logging.to_files: true
logging.files:
  # Configure the path where the logs are written. The default is the logs directory
  # under the home path (the binary location).
  #path: /var/log/mybeat

  # The name of the files where the logs are written to.
  #name: mybeat

  # Configure log file size limit. If limit is reached, log file will be
  # automatically rotated
  #rotateeverybytes: 10485760 # = 10MB

  # Number of rotated log files to keep. Oldest files will be deleted first.
  #keepfiles: 7