Skip to content

Latest commit

 

History

History
 
 

javascript

MaterialX JavaScript

This folder contains tests and examples that leverage the JavaScript bindings for the MaterialX library. The bindings are generated using the emscripten SDK.

Generating the Bindings

Prerequisites

The emscripten SDK is required to generate the JavaScript bindings. There are several ways of using the SDK on different platforms. In general, we recommend to install the SDK directly, following the instructions below. Alternative options are explained below.

To install the SDK directly, follow the instructions of the emscripten SDK installation Guide. Make sure to install prerequisites depending on your platform and read usage hints first (e.g. differences between Unix / Windows scripts).

Note that following the instructions will set some environment variables that are required to use the SDK. These variables are only set temporarily for the current terminal, though. Setting the environment variables in other terminals can be achieved by running

source ./emsdk_env.sh

inside of the emsdk folder (check the documentation for the Windows equivalent). In case of the MaterialX project, it is not required to have these environment variables set. You can also use a CMake build flag instead, as described in the build instructions below.

Setting the environment variables permanently is also possible, either by adding a --permanent flag to the activate command, or by sourcing the emsdk_env script every time a shell is launched, e.g. by adding the source call to ~/.bash_profile or an equivalent file. Note however, that the environment variables set by the emscripten SDK might override existing system settings, like the default Python, Java or NodeJs version, so setting them permanently might not be desired on all systems.

Alternative options to use the emscripten SDK

If installing the emscripten SDK directly isn't desired, e.g. because you prefer to keep development environments cleanly separated, it can be provided in different ways.

On Windows, using WSL2 (e.g. with an Ubuntu image) is a viable alternative to isolate the build environment from your main system. Simply set up the build environment in that Linux container.

Another alternative is to use a Docker image. With Docker installed, use the emscripten Docker image as described in the Docker build instructions below.

Build Steps

Run the following commands in the root folder of this repository.

Create a build folder in the javascript folder below the root of the repository and navigate to that folder:

mkdir ./javascript/build
cd ./javascript/build

If you are using the emsdk directly on Windows, note that the emscripten SDK doesn't work with Microsoft's Visual Studio build tools. You need to use an alternative CMake generator like MinGW Makefiles or Ninja. We recommend to use Ninja (unless you already have MinGW installed), since it's pretty lightweight and a pure build system, instead of a full compiler suite. Download Ninja for Windows and unzip the ninja.exe file to some suitable directory in your path (use the command "echo $PATH" or similar to view your PATH variable).

Generate the build files with CMake. When building the JavaScript bindings, you can optionally specify the emsdk path with the MATERIALX_EMSDK_PATH option. This option can be omitted if the emsdk/emsdk_env.sh script was run beforehand.

cmake .. -DMATERIALX_BUILD_JS=ON -DMATERIALX_BUILD_RENDER=OFF 
-DMATERIALX_BUILD_TESTS=OFF 
-DMATERIALX_BUILD_GEN_OSL=OFF
-DMATERIALX_BUILD_GEN_MDL=OFF  
-DMATERIALX_EMSDK_PATH=</path to emsdk>

On Windows, remember to set the CMake generator via the -G flag , e.g. -G "Ninja".

To build the project, run

cmake --build . --target install -j8

Change the value of the -j option to the number of threads you want to build with.

Docker

In order to build using the Docker image, execute the following command in a terminal (in the root of this repository, after creating the build folder), using the CMake commands introduced above.

docker run --rm -v {path_to_MaterialX_repo}:/src emscripten/emsdk sh -c "cd build && <cmake generator command> && <cmake build command>"

For follow-up builds (i.e. after changing the source code), remove the <cmake generator command> step from the above call.

Output

After building the project the JsMaterialXCore.wasm, JsMaterialXCore.js, JsMaterialXGenShader.wasm, JsMaterialXGenShader.js and JsMaterialXGenShader.data files can be found in the global install directory of this project.

Testing

JavaScript unit tests are located in the MaterialXTest folder and use the .spec.js suffix. A sample browser is located in the MaterialXView folder which allows preview of some of provided sample MaterialX materials.

Unit Tests

These tests require node.js, which is shipped with the emscripten environment. Make sure to source the emsdk/emsdk_env.sh script before running the steps described below, if you don't have NodeJs installed on your system already (running the command is not required otherwise).

  1. From the MaterialXTest directory, install the npm packages.

    npm install
  2. Run the tests from the MaterialXTest directory.

    npm run test         # Core library tests
    npm run test:browser # Code generation library test

Sample Viewer

  1. From the MaterialXView directory, install the npm packages and build the viewer.

    npm install
    call npm run build
  2. Start a local host and open in a browser. In this example http-server is being used but any utility which can open a local host can be used.

    call npm install http-server -g
    call http-server . -p 8000
    # Open browser

Sample build scripts

Note that a sample build script is provided in javascript/build_javascript_win.bat with a corresponding script to clean the build area in javascript/clean_javascript_win.bat. Modify the Emscripten SDK and MaterialX build locations as needed.

Additionaly the github actions workflow YAML file (.github/workflows/main.yml) can be examined as well.

Using the Bindings

Consuming the Module

The JavaScript bindings come in two different flavors. JsMaterialXCore.js contains all bindings for the MaterialXCore and MaterialXFormat packages, allowing to load, traverse, modify and write MaterialX documents. JsMaterialXGenShader.js contains the Core and Format bindings, as well as the bindings required to generate WebGL-compatible shader code from a MaterialX document. Since this involves shipping additional data, we recommend to the JsMaterialXCore.js if shader generation is not required.

The bindings can be consumed via a script tag in the browser:

<script src="./JsMaterialXCore.js" type="text/javascript"></script>
<script type="text/javascript">
    MaterialX().then((mx) => {
        mx.createDocument();
        ...
    });
</script>

In NodeJs, simply require the MaterialX module like this:

const MaterialX = require('./JsMaterialXCore.js');

MaterialX().then(mx => {
    mx.createDocument();
    ...
});

JavaScript API

In general, the JavaScript API is the same as the C++ API. Sometimes, it doesn't make sense to bind certain functions or even classes, for example when there is already an alternative in native JS. Other special cases are explained in the following sections.

Data Type Conversions

Data types are automatically converted from C++ types to the corresponding JavaScript types, to provide a more natural interface on the JavaScript side. For example, a string that is returned from a C++ function as an std::string won't have the C++ string interface, but will be a JavaScript string instead. While this is usually straight-forward, it has some implications when it comes to containers.

C++ vectors will be converted to JS arrays (and vice versa). Other C++ containers/collections are converted to either JS arrays or objects as well. While this provides a more natural interface on the JS side, it comes with the side-effect that modifications to such containers on the JS side will not be reflected in C++. For example, pushing an element to a JS array that was returned in place of a C++ vector will not update the vector in C++. Elements within the array can be modified and their updates will be reflected in C++, though (this does only apply to class types, not primitives or strings, of course).

Template Functions

Functions that handle generic types in C++ via templates are mapped to JavaScript by creating multiple bindings, one for each type. For example, the InterfaceElement::setInputValue function is mapped as setInputValueString, setInputValueBoolean, setInputValueInteger and so on.

Iterators

MaterialX comes with a number of iterators (e.g. TreeIterator, GraphIterator). These iterators implement the iterable (and iterator) protocol in JS, and can therefore be used in for ... of loops.

Exception Handling

When a C++ function throws an exception, this exception will also be thrown by the corresponding JS function. However, you will only get a pointer (i.e. a number in JS) to the C++ exception object in a try ... catch ... block, due to some exception handling limitations of emscripten. The helper method getExceptionMessage can be used to extract the exception message from that pointer:

const doc = mx.createDocument();
doc.addNode('category', 'node1');

try {
    doc.addNode('category', 'node1');
} catch (errPtr) {
    // typeof errPtr === 'number' yields 'true'
    console.log(mx.getExceptionMessage(errPtr)); // Prints 'Child name is not unique: node1'
}

Loading MaterialX files

The bindings expose the readFromXmlString and readFromXmlFile functions. Their usage is similar to C++ and should work in browsers and NodeJs. Note that these functions are asynchronous in JavaScript, so you need to either await them or place depending code in a .then() block.

By default, the functions will resolve referenced (i.e. included) documents. This can be disabled by setting the readOptions.readXIncludes to false:

const readOptions = new mx.XmlReadOptions();
readOptions.readXIncludes = false;
await readFromXmlFile(doc, filename, searchPath, readOptions); // will only read the top-level file, no includes

Note that the readXIncludesFunction option that exists on the C++ read options is not supported in JavaScript.

The searchPath is a semicolon-separated list of absolute or relative paths. Relative paths will be evaluated with regards to the current working directory. In case of using absolute search paths in web browsers (i.e. urls), note that urls like mydomain.com/path or localhost/path might be considered relative paths. To ensure they're used as absolute paths, make them fully formed urls, i.e. have a protocol prefix like https://.

Writing MaterialX files

Documents can be written to strings via the writeToXmlString method, and to files with the writeToXmlFile method. In NodeJs, the latter will write the file to the path provided to the method (relative paths will be evaluated with respect to the current working directory). In the browser, the written file will be downloaded automatically, so only the file name matters.

Note that the XmlWriteOptions.elementPredicate option is not supported in JavaScript.

Using the EsslShaderGenerator JavaScript bindings

Setup

Make sure to consume JsMaterialXGenShader.js instead of JsMaterialXCore.js as described here. Additionally, ensure that the app serves JsMaterialXGenShader.data and JsMaterialXGenShader.wasm. The .data file includes the prepackaged library files containing the shader snippets and MaterialX node definitions/implementations required for generating the shader code.

Generating Essl Shader Code & Compiling with WebGL

To generate WebGL 2 compatible shader code a generator context and an instance of the EsslShaderGenerator class is required.

const gen = new mx.EsslShaderGenerator();
const genContext = new mx.GenContext(gen);

The standard libraries need to be loaded and imported into the document. This step is required as the standard libraries contain all the definitions and snippets needed for assembly of the shader code.

const stdlib = mx.loadStandardLibraries(genContext);
const doc = mx.createDocument();
doc.importLibrary(stdlib);

Now it is either time to load a document from a file as outline here or create one using the API. Generating the code consists of finding a renderable element (the javascript binding returns the first renderable element) and calling the generate method from the EsslShaderGenerator class. The shader code for the vertex/pixel shader may be requested from the resulting Shader instance.

const elem = mx.findRenderableElement(doc);
const shader = gen.generate(elem.getNamePath(), elem, genContext);
const fShader = shader.getSourceCode("pixel");    
const vShader = shader.getSourceCode("vertex");

Shader generation options may be changed by getting the options from the context and altering its properties. Changes to these options must occur after the standard libraries have been loaded as the call to mx.loadStandardLibraries(genContext) sets the options to some defaults.

genContext.getOptions().fileTextureVerticalFlip = false;

Compilation using a WebGL 2 context (gl) is straight forward.

const glVertexShader = gl.createShader(gl.VERTEX_SHADER);
gl.shaderSource(glVertexShader, vShader);
gl.compileShader(glVertexShader);
const glPixelShader = gl.createShader(gl.FRAGMENT_SHADER);
gl.shaderSource(glPixelShader, fShader);
gl.compileShader(glPixelShader);

However, any rendering framework that supports custom shaders should do. In the Web Viewer sample app we use the RawShaderMaterial class from three.js.

Getting the shader uniforms

The uniform values can be obtained from the shader as a JSON, either for the vertex or the pixel shader.

shader.getUniformValues("vertex");
shader.getUniformValues("pixel")

Each entry corresponds to a uniform name and the value is an object which contains the type as specified in the generators Syntax class and the stringified value. Some of the commonly used uniform names in the generated shader are listed here. An example that parses the JSON and feeds the uniform data to a three.js based application can be found in the Web Viewer Sample App.

Maintaining the Bindings

This section provides some background on binding creation for contributors. In general, we recommed to look at existing bindings for examples.

What to Bind?

In general, we aim for 100% coverage of the MaterialX API, at least for the Core and Format packages. However, there are functions and even classes where creating bindings wouldn't make much sense. The splitString utility function is such an example, because the JavaScript string class does already have a split method. The FilePath and FileSearchPath classes of the Format package are simply represented as strings on the JavaScript side, even though they provide complex APIs in C++. This is because most of their APIs do not apply to browsers, since they are specific to file system operations. In NodeJs, they would present a competing implementation of the core fs module, and therefore be redundant (even though they might be convenient in some cases).

The examples above illustrate that it does not always make sense to create bindings, if there is no easy way to map them to both browsers and NodeJs, or if there is already an alternative in native JS. The overhead, both in maintenance and bundle size, wouldn't pay off.

Emscripten's optional_override

Emscripten's optional_override allows to provide custom binding implementations in-place and enables function overloading by parameter count, which is otherwise not supported in JavaScript. Contributors need to be careful when using it, though, since there is a small pitfall.

If a function binding has multiple overloads defined via optional_override to support optional parameters, this binding must only be defined once on the base class (i.e. the class that defines the function initially). Virtual functions that are overriden in deriving classes must not be bound again when creating bindings for these derived classes. Doing so can lead to the wrong function (i.e. base class' vs derived class' implementation) being called at runtime.

Optional Parameters

Many C++ functions have optional parameters. Unfortunately, emscripten does not automatically deal with optional parameters. Binding these functions the 'normal' way will require users to provide all parameters in JavaScript, including optional ones. We provide helper macros to cicumvent this issue. Different flavors of the BIND_*_FUNC macros defined in Helpers.h can be used to conveniently bind functions with optional parameters. See uses of these macros in the existing bindings for examples.

NOTE: Since these macros use optional_override internally, the restrictions explained above go for them as well. Only define bindings for virtual functions once on the base class with these macros.

Template Functions

Generic functions that deal with multiple types cannot be bound directly to JavaScript. Instead, we create multiple bindings, one per type. The binding name follows the pattern functionName<Type>. For convenience, we usually provide a custom macro that takes the type and constructs the corresponding binding. See the existing bindings for examples.

Array <-> Vector conversion

As explained in the user documentation, types are automatically converted between C++ and JavaScript. While there are multiple examples for custom marshalling of types (e.g. std::pair<int, int> to array, or FileSearchPath to string), the most common use case is the conversion of C++ vectors to JS arrays, and vice versa. This conversion can automatically be achieved by including the VectorHelper.h header in each binding file that covers functions which either accept or return vectors in C++.

Custom JavaScript Code

Some bindings cannot be direct mappings to a C++ function. In particular when operations are asynchronous in JavaScript (e.g. loading files), it's easier to provide custom JavaScript implementations for the affected functions. This is how readFromXmlString and readFromXmlFile are implemented, for example. Such JavaScript code can be provided using the post-JS feature of emscripten. There should be one post.js file per MaterialX module, if that module requires any custom JS code. Note that these files need to be added to CMakeLists.txt in the JsMaterialX source folder. We recommend to provide custom code that depends on the WebAssembly module like this:

onModuleReady(function () {
    <your code here>
});

This will register your code after the module has been initialized. The wasm module will be available as Module. Since the module itself is ES5 code, we recommend to write custom code in ES5 as well, even though ES6 should work as well in most cases.

In order to avoid conflicting definitions in post.js files, we recommend to wrap custom code in an IIFE (Immediately Invoked Function Expression).

Testing strategy

Testing every binding doesn't seem desirable, since most of them will directly map to the C++ implementation, which should already be tested in the C++ tests. Instead, we only test common workflows (e.g. iterating/parsing a document), bindings with custom implementations, and our custom binding mechanisms. The latter involves custom marshalling, e.g. of the vector <-> array conversion, or support for optional parameters. Additionally, all features that might behave different on the web, compared to desktop, should be tested as well.

The C++ and Python binding tests follow a different approach than the JS unit tests, by testing larger workflows instead of single features. In order to cover at least as much functionality in JS as in Python, the tests have been ported to JS. However, JS tests are organized in the same file structure as the bindings, so these workflow tests have been added to the file where they fit in best (e.g. the Traverse Graph test is in traversal.spec.js). This is equivalent to how tests are organized in C++.

CI

Emscripten builds and test runs are specified in .github/workflows/build_wasm.yml.