invalid key/value pair in file /etc/udev/rules.d/VeCanSetup.rules on line 14, starting at character 32 (',')

[mvincm]

Hello,

Can is working but every reboot I notice this line in logs (dmesg). Is something wrong with the script or I have something messed up with my specific configuration?

Any ideas?

Thanks in advance.
Mat

[kwindrem]

Without seeing the udev rules file which is generated automatically during setup I can't tell what might be wrong.

[mvincm]

Hello,

Yes, you are totally right. Here are log files and file. Should I search some else more? But still can-us adapter (canable) works fine for VenusOS.

[    5.046980] hub 1-1.3:1.0: 7 ports detected
[    5.103059] udevd[168]: invalid key/value pair in file /etc/udev/rules.d/VeCanSetup.rules on line 14, starting at character 32 (',')
[    5.130958] udevd[169]: starting eudev-3.2.9

root@raspberrypi2:~# cat /etc/udev/rules.d/VeCanSetup.rules
# udev rules for gs USB devices

# replace ...PH (place holder) with actual values
# DELETE the placeholder lines if they aren't used !!
# rename file to e.g., can0.rules
#

ACTION=="add", SUBSYSTEM=="net",\
  ENV{ID_VENDOR_ID}==0x72",\
  ENV{ID_MODEL_ID}=="0101",\
  ATTRS{serial}=="HQ2238GMMAF",\
  NAME="can10",\
  ENV{VE_NAME}="can10PCAN (can10)",\
  RUN+="/usr/local/bin/startGsUsbCan.sh can10"
  RUN+="/usr/bin/logger [udev] CANbus device added:\
    can10PCAN (can10)\
    can10\
    VENDOR_PH\
    MODEL_PH\
    HQ2238GMMAF\
    "
root@raspberrypi2:~#

[kwindrem]

I have made some changes in when the setup script adds a new device. Previous to this change unused udev rules were not getting removed so "VENDOR_PH" etc remained in the udev rules. Now they are deleted as expected

I was not seeing the error here and I don't know if this will eliminate the error you are experiencing but it would be worth removing the device and adding it back in to see if the error goes away. Please report back here with your findings

[mvincm]

Thanks mate! I will check it tomorrow evening. Once again thank you for your support.