Skip to content

Latest commit

 

History

History
59 lines (42 loc) · 1.63 KB

README.md

File metadata and controls

59 lines (42 loc) · 1.63 KB
Raw

arduino-ds18b20-exporter

Little sketch with prometheus exporter for arduino nano and multiple Dallas temperature sensors.

Parts:

  • 1x ds18b20 sensor
  • 1x arduino nano
  • 1x enc28j80 ethernet shield

how it work's

Just curl http://192.168.1.41 :

sensor_exporter_uptime{mac="90:a2:da:0d:10:5a"} 1908564
sensor{mac="90:a2:da:0d:10:5a",addr="40.28.168.7.0.0.128.63",res="12",pwr="parasite"} 21.94
sensor{mac="90:a2:da:0d:10:5a",addr="40.129.18.124.6.0.0.87",res="9",pwr="external"} 24.00
sensor{mac="90:a2:da:0d:10:5a",addr="40.203.37.123.6.0.0.190",res="9",pwr="external"} 36.00
sensor{mac="90:a2:da:0d:10:5a",addr="40.255.47.100.102.20.2.94",res="12",pwr="external"} 8.75

⚠️ Warning ⚠️

Make sure that your Arduino is flashed with bootloader supporting AVR watchdog, like Optiboot. Otherwise Arduino may stuck in a boot loop.

Optiboot is already included in modern Arduino IDE versions. Connect external programmer, select new bootloader and press "Burn Bootloader":

How to burn bootloader from Arduino IDE

How to build

With default MAC and IP addresses (90:a2:da:0d:10:5a, 192.168.1.41):

make fw

To build with custom MAC and IP addresses:

make MAC=12:34:56:78:90:ab IP=192.168.0.123 fw

How to upload

avrdude -v -patmega328p -carduino -P/dev/$TTYDEV -b115200 -D -Uflash:w:fw/arduino-ds18b20-exporter-$MAC-$IP.hex:i

How to test

curl -v http://$IP/

Debug log is on Arduino's USB Serial port (115200 baud).

Note that watchdog resets the device if there was no HTTP requests during last 60 seconds.