Recommended websites to search for parts:
Basic components/equipment needed to build your own Bleskomat (DIY) ATM:
- 2 x Breadboard (400-pin)
- Jumper wires (M-M)
- Jumper wires (M-F)
- ESP32 Devkit:
- DG600F Coin Acceptor:
- 1.8" (128 x 160 pixel) TFT display
- Button
- 10k ohm resistor
- DC 5.5/2.1 mm DIP adapter
- 12V DC power adaptor with ~1A
- Standard USB to micro USB cable
- Multimeter
Optional components/equipment:
- Soldering iron
- 2.54 mm pins
- To power the ESP32 devkit from the 12V DC power supply:
- XL4005 step-down converter
- USB (F) adapter
- Alternatively, you could use a USB car charger which includes both a step-down converter and USB (F) output
- If you wish to configure your Bleskomat via SD card:
- Micro SD card with macro adapter