Increase speed of weight dial

[fulldecent]

This UI for changing the weight is great!

Can it please scroll 2x faster?

Press and drag over the lbs on bottom left.

[karimknaebel]

i fear it would become finicky at that speed. it should be used to quickly adjust weight from by one or two steps. for larger changes, using the keyboard is probably faster.

[fulldecent]

I am using it on a iPhone 13. If you are doing a down set, let's say 5 or 10 pounds less, that requires dragging from there and down, and then repeating that 3 or 4 times.

[fulldecent]

OK, I see this is working well sometimes and not well sometimes and I'm not really sure what rule applies here.

On the barbell press if you start with 90 and you go up or down then you get nice 5 pound increments this works great.

There's a small concern here is that if you're starting at 97.5 then going up should be +5 pounds instead of aligning at 100. This is because some machines have a specific number that they start with which is not an even round number. So when you add plates, it's gonna be round numbers on top of a weird number.

But for some reason when using the Peck fly, it is incrementing at 1 pound, which is way too slow. This is true, even if you're starting at 90.

trim.EA3A9D6E-25C6-48E5-8FF4-FA5346B0C655.MOV

trim.3BDB8434-4352-4343-AF25-1E7E242BF475.MOV

[karimknaebel]

iirc, I made it 5 pound increments for plate / barbell based exercises only. Aligning at 100 is a feature not a bug. This behavior will not work for every single use case, but that’s just impossible to achieve.

[fulldecent]

Aha, got it thank you.

The 5 pound moving speed is great. Because I'm moving less than 5×4 clicks = 20 pounds in a set. And starting a new machine is easy to get to 100 or so pounds. 20 clicks.

But for the 1 pound increment this is the only time I thought it was too slow. because I am moving more than 1×10 clicks = 10 pounds in a set. Starting at zero is a pain because getting to 100 is 100 clicks. The 1 pound clicks are fine, but I just hoped those clicks scrolled faster just for the 1 pound.

The case is made, and I am happy for the issue to close if this is out of scope.