diff --git a/src/bin/agent/ca_messages.mes b/src/bin/agent/ca_messages.mes index 2119870fdf..c45f3e5257 100644 --- a/src/bin/agent/ca_messages.mes +++ b/src/bin/agent/ca_messages.mes @@ -45,7 +45,7 @@ encounters an unrecoverable error from within the event loop. % CTRL_AGENT_HTTPS_SERVICE_REUSE_FAILED failed to reuse HTTPS service bound to address: %1 port: %2 This error message indicates that the server has failed reusing existing -HTTPS service on the specified address and port. The server can not swith from +HTTPS service on the specified address and port. The server can not switch from HTTPS to HTTP sockets using the same address and port. % CTRL_AGENT_HTTPS_SERVICE_STARTED HTTPS service bound to address: %1 port: %2 @@ -58,9 +58,9 @@ This informational message indicates that the server has reused existing HTTPS service on the specified address and port. Note that any change in the TLS setup has been applied. -% CTRL_AGENT_HTTP_SERVICE_REUSE_FAILED failed to reused HTTP service bound to address: %1 port: %2 +% CTRL_AGENT_HTTP_SERVICE_REUSE_FAILED failed to reuse HTTP service bound to address: %1 port: %2 This error message indicates that the server has failed reusing existing -HTTP service on the specified address and port. The server can not swith from +HTTP service on the specified address and port. The server can not switch from HTTP to HTTPS sockets using the same address and port. % CTRL_AGENT_HTTP_SERVICE_STARTED HTTP service bound to address: %1 port: %2 @@ -74,7 +74,7 @@ HTTP service on the specified address and port. % CTRL_AGENT_IS_DEPRECATED Kea Control Agent is deprecated. Its function has been moved to Kea servers. This warning message indicates that the Control Agent has been deprecated. -All its function has been moved to Kea servers. +All its functions have been moved to Kea servers. % CTRL_AGENT_RUN_EXIT application is exiting the event loop Logged at debug log level 0. diff --git a/src/bin/dhcp4/dhcp4_messages.mes b/src/bin/dhcp4/dhcp4_messages.mes index 9fd9cf45f9..a55127233b 100644 --- a/src/bin/dhcp4/dhcp4_messages.mes +++ b/src/bin/dhcp4/dhcp4_messages.mes @@ -509,7 +509,7 @@ This debug message is printed when a callout installed on the pkt4_receive hook point sets the next step to SKIP. For this particular hook point, the value setting of the flag instructs the server to drop the packet. -% DHCP4_HOOK_PACKET_SEND_DROP %1: prepared DHCPv4 response was not sent because a callout set the next ste to DROP +% DHCP4_HOOK_PACKET_SEND_DROP %1: prepared DHCPv4 response was not sent because a callout set the next step to DROP Logged at debug log level 15. This debug message is printed when a callout installed on the pkt4_send hook point set the next step to DROP. For this particular hook point, the setting @@ -519,7 +519,7 @@ the server processed client's request and acted on it (e.g. possibly allocated a lease). The argument specifies the client and transaction identification information. -% DHCP4_HOOK_PACKET_SEND_SKIP %1: prepared response is not sent, because a callout set the next stp to SKIP +% DHCP4_HOOK_PACKET_SEND_SKIP %1: prepared response is not sent, because a callout set the next step to SKIP Logged at debug log level 40. This debug message is printed when a callout installed on the pkt4_send hook point sets the next step to SKIP. For this particular hook point, this @@ -789,7 +789,7 @@ requested-ip-address option (if present). Logged at debug log level 50. A debug message issued when an option failed to unpack correctly, making it impossible to unpack the remaining options in the packet. The server will -server will still attempt to service the packet. +still attempt to service the packet. % DHCP4_PACKET_PACK %1: preparing on-wire format of the packet to be sent Logged at debug log level 50. @@ -1174,7 +1174,7 @@ and will send DHCPNAK if the received message was DHCPREQUEST. The argument includes the client and the transaction identification information. -% DHCP4_TESTING_MODE_SEND_TO_SOURCE_ENABLED All packets will be send to source address of an incoming packet - use only for testing +% DHCP4_TESTING_MODE_SEND_TO_SOURCE_ENABLED All packets will be sent to source address of an incoming packet - use only for testing This message is printed then KEA_TEST_SEND_RESPONSES_TO_SOURCE environment variable is set. It's causing Kea to send packets to source address of incoming packet. Usable just in testing environment diff --git a/src/bin/dhcp6/dhcp6_messages.mes b/src/bin/dhcp6/dhcp6_messages.mes index 760f35e1f7..dcd2beee2a 100644 --- a/src/bin/dhcp6/dhcp6_messages.mes +++ b/src/bin/dhcp6/dhcp6_messages.mes @@ -424,7 +424,7 @@ This debug message is printed when a callout installed on buffer6_send hook point set the next step to SKIP value. For this particular hook point, the SKIP setting a callout instructs the server to drop the packet. Server completed all the processing (e.g. may have assigned, updated -or released leases), but the response will not be send to the client. +or released leases), but the response will not be sent to the client. The argument includes the client and transaction identification information. @@ -467,7 +467,7 @@ This debug message is printed when a callout installed on lease6_release hook point set the next step to SKIP value. For this particular hook point, that setting by a callout instructs the server to not release a lease. If client requested release of multiples leases (by sending -multiple IA options), the server will retains this particular lease and +multiple IA options), the server will retain this particular lease and will proceed with other renewals as usual. The argument holds the client and transaction identification information. @@ -496,7 +496,7 @@ This debug message is printed when a callout installed on the pkt6_receive hook point sets the next step to SKIP. For this particular hook point, the value setting instructs the server to drop the packet. -% DHCP6_HOOK_PACKET_SEND_DROP %1: prepared DHCPv6 response was not sent because a callout set the next ste to DROP +% DHCP6_HOOK_PACKET_SEND_DROP %1: prepared DHCPv6 response was not sent because a callout set the next step to DROP Logged at debug log level 15. This debug message is printed when a callout installed on the pkt6_send hook point set the next step to DROP. For this particular hook point, the setting diff --git a/src/hooks/d2/gss_tsig/gss_tsig_messages.mes b/src/hooks/d2/gss_tsig/gss_tsig_messages.mes index d589599395..093541d1e9 100644 --- a/src/hooks/d2/gss_tsig/gss_tsig_messages.mes +++ b/src/hooks/d2/gss_tsig/gss_tsig_messages.mes @@ -49,7 +49,7 @@ created a new GSS-TSIG key. The name of the new key is displayed. This warning message is issued when the setup of a new GSS-TSIG key failed. The name of the new key and the error are displayed. -% GSS_TSIG_NEW_KEY_SETUP_SUCCEED new GSS-TSIG key '%1' setup succeed. +% GSS_TSIG_NEW_KEY_SETUP_SUCCEED new GSS-TSIG key '%1' setup succeeded. Logged at debug log level 40. This debug message is issued when the setup of a new GSS-TSIG key successfully finished. The name of the new key is displayed. @@ -63,7 +63,7 @@ TKEY lifetime) were removed. The number of removed keys is displayed. This info message indicates that the GSS-TSIG hooks library has been unloaded successfully. -% GSS_TSIG_VERIFIED GSS-TSIG verify successed. +% GSS_TSIG_VERIFIED GSS-TSIG verify succeeded. Logged at debug log level 40. A debug message issued when GSS-TSIG verification succeeded. @@ -160,7 +160,7 @@ is null. % TKEY_EXCHANGE_FAIL_RESPONSE_ERROR GSS-TKEY exchange failed because the response contains an error: %1. This error message indicated that GSS-TKEY exchange failed because the response -contains an error. The argument details the reponse error. +contains an error. The argument details the response error. % TKEY_EXCHANGE_FAIL_TKEY_ERROR GSS-TKEY exchange failed because the response contains TKEY error: %1. This error message indicated that GSS-TKEY exchange failed because the response diff --git a/src/hooks/dhcp/high_availability/ha_messages.mes b/src/hooks/dhcp/high_availability/ha_messages.mes index 8a844041e4..a0de063119 100644 --- a/src/hooks/dhcp/high_availability/ha_messages.mes +++ b/src/hooks/dhcp/high_availability/ha_messages.mes @@ -93,7 +93,7 @@ such clients and if the number of such clients exceeds the max-unacked-clients threshold, the server will transition to the partner-down state. The first argument specifies the relationship name. The second argument contains client identification information. The third argument specifies the number of -clients to which the server has failed to respond. The forth argument specifies +clients to which the server has failed to respond. The fourth argument specifies the number of additional clients which, if not provisioned, will cause the server to transition to the partner-down state. @@ -113,7 +113,7 @@ such clients and if the number of such clients exceeds the max-unacked-clients threshold, the server will transition to the partner-down state. The first argument specifies the relationship name. The second argument contains client identification information. The third argument specifies the number of clients -to which the server has failed to respond. The forth argument specifies the +to which the server has failed to respond. The fourth argument specifies the number of additional clients which, if not provisioned, will cause the server to transition to the partner-down state. @@ -685,7 +685,7 @@ The argument contains a reason for the error. % HA_SUBNET4_SELECT_INVALID_HA_SERVER_NAME %1: invalid ha-server-name value for subnet %2 This error message is issued when the received DHCPv4 query is dropped by this server because the specified ha-server-name value in the subnet's -user-context has non-string type or is empty. It is a server's misconifguration. +user-context has non-string type or is empty. It is a server's misconfiguration. The first argument is the client identification information. The second argument is a subnet prefix. @@ -732,7 +732,7 @@ The argument contains a reason for the error. % HA_SUBNET6_SELECT_INVALID_HA_SERVER_NAME %1: invalid ha-server-name value for subnet %2 This error message is issued when the received DHCPv6 query is dropped by this server because the specified ha-server-name value in the subnet's -user-context has non-string type or is empty. It is a server's misconifguration. +user-context has non-string type or is empty. It is a server's misconfiguration. The first argument is the client identification information. The second argument is a subnet prefix. diff --git a/src/hooks/dhcp/mysql/mysql_fb_messages.mes b/src/hooks/dhcp/mysql/mysql_fb_messages.mes index 0ea92ef271..589968321d 100644 --- a/src/hooks/dhcp/mysql/mysql_fb_messages.mes +++ b/src/hooks/dhcp/mysql/mysql_fb_messages.mes @@ -48,7 +48,7 @@ This error message is issued when TLS for the connection was required but TLS is not used. % LEGAL_LOG_MYSQL_ROLLBACK rolling back MySQL database -The code has issued a rollback call. All outstanding transaction will +The code has issued a rollback call. All outstanding transactions will be rolled back and not committed to the database. % LEGAL_LOG_MYSQL_START_TRANSACTION starting new MySQL transaction diff --git a/src/hooks/dhcp/pgsql/pgsql_fb_messages.mes b/src/hooks/dhcp/pgsql/pgsql_fb_messages.mes index 1f687b7080..e6d7819680 100644 --- a/src/hooks/dhcp/pgsql/pgsql_fb_messages.mes +++ b/src/hooks/dhcp/pgsql/pgsql_fb_messages.mes @@ -25,7 +25,7 @@ is typically a network or database server issue. % LEGAL_LOG_PGSQL_DEALLOC_ERROR An error occurred deallocating SQL statements while closing the PostgreSQL log database: %1 This is an error message issued when a legal log hook library experienced -and error freeing database SQL resources as part of closing its connection to +an error freeing database SQL resources as part of closing its connection to the PostgreSQL database. The connection is closed as part of normal server shutdown. This error is most likely a programmatic issue that is highly unlikely to occur or negatively impact server operation. @@ -51,7 +51,7 @@ should be of the form 'keyword=value keyword=value...' is included in the message. % LEGAL_LOG_PGSQL_ROLLBACK rolling back PostgreSQL database -The code has issued a rollback call. All outstanding transaction will +The code has issued a rollback call. All outstanding transactions will be rolled back and not committed to the database. % LEGAL_LOG_PGSQL_START_TRANSACTION starting a new PostgreSQL transaction diff --git a/src/hooks/dhcp/pgsql/pgsql_lb_messages.mes b/src/hooks/dhcp/pgsql/pgsql_lb_messages.mes index ec964aec7a..1cfaced267 100644 --- a/src/hooks/dhcp/pgsql/pgsql_lb_messages.mes +++ b/src/hooks/dhcp/pgsql/pgsql_lb_messages.mes @@ -234,7 +234,7 @@ This message is issued only once. % PGSQL_LB_ROLLBACK rolling back PostgreSQL database Logged at debug log level 50. -The code has issued a rollback call. All outstanding transaction will +The code has issued a rollback call. All outstanding transactions will be rolled back and not committed to the database. % PGSQL_LB_UPDATE_ADDR4 updating IPv4 lease for address %1 diff --git a/src/hooks/dhcp/radius/radius_messages.mes b/src/hooks/dhcp/radius/radius_messages.mes index 4296a722d5..1f7db758a8 100644 --- a/src/hooks/dhcp/radius/radius_messages.mes +++ b/src/hooks/dhcp/radius/radius_messages.mes @@ -353,7 +353,7 @@ attributes, so there can be multiple log messages per RADIUS message. It displays the message identifier, the exchange identifier and the value of the Reply-Message attribute. -% RADIUS_RESUME_FAILED Resuming ithe RADIUS thread pool failed: %1 +% RADIUS_RESUME_FAILED Resuming the RADIUS thread pool failed: %1 This error message is emitted when an unexpected error occurred while attempting to resume the thread pool. This error is highly unlikely and indicates a programmatic issue that should be reported as defect. @@ -398,5 +398,5 @@ of stored records before the failure and the expected number of records are displayed. % RADIUS_THREAD_POOL_STARTED RADIUS thread pool started with %1 threads. -This informational message is issued when the thread pool is starrted. +This informational message is issued when the thread pool is started. The number of threads is displayed. diff --git a/src/lib/config/config_messages.mes b/src/lib/config/config_messages.mes index e686574aeb..aff1fe01b5 100644 --- a/src/lib/config/config_messages.mes +++ b/src/lib/config/config_messages.mes @@ -50,7 +50,7 @@ at the given address and port, has begun to shutdown. % COMMAND_HTTP_SOCKET_SECURITY_WARNING command socket configuration is NOT SECURE: %1 This warning message is issued when security enforcement is disabled -and command socket configuration does not use HTTPS/TLS or baseic HTTP +and command socket configuration does not use HTTPS/TLS or basic HTTP authentication. The server will still use the socket as configured but is warning that doing so may pose a security risk. diff --git a/src/lib/d2srv/d2_messages.mes b/src/lib/d2srv/d2_messages.mes index deebbf7a88..b7aece9402 100644 --- a/src/lib/d2srv/d2_messages.mes +++ b/src/lib/d2srv/d2_messages.mes @@ -237,7 +237,7 @@ configuration needs to be updated or the source of the FQDN itself should be investigated. % DHCP_DDNS_QUEUE_MGR_QUEUE_FULL application request queue has reached maximum number of entries %1 -This an error message indicating that DHCP-DDNS is receiving DNS update +This is an error message indicating that DHCP-DDNS is receiving DNS update requests faster than they can be processed. This may mean the maximum queue needs to be increased, the DHCP-DDNS clients are simply generating too many requests too quickly, or perhaps upstream DNS servers are experiencing @@ -404,12 +404,12 @@ server or others as appropriate. Logged at debug log level 55. This is a debug message issued when reverse DNS updates are disabled and DHCP_DDNS receives an update request containing a reverse DNS update. The -reverse update will not performed. +reverse update will not be performed. % DHCP_DDNS_RUN_EXIT application is exiting the event loop Logged at debug log level 0. This is a debug message issued when the DHCP-DDNS server exits its -event lo +event loop % DHCP_DDNS_SECURITY_CHECKS_DISABLED Invoked with command line option -X, Security checks are disabled!! This warning is emitted when internal security checks normally diff --git a/src/lib/database/db_messages.mes b/src/lib/database/db_messages.mes index 29c68db201..8a658deed3 100644 --- a/src/lib/database/db_messages.mes +++ b/src/lib/database/db_messages.mes @@ -33,7 +33,7 @@ This is logged before running the kea-admin command to automatically initialize after getting the schema version initially failed. The full kea-admin command is shown. % DATABASE_MYSQL_ROLLBACK rolling back MySQL database -The code has issued a rollback call. All outstanding transaction will +The code has issued a rollback call. All outstanding transactions will be rolled back and not committed to the database. % DATABASE_MYSQL_START_TRANSACTION starting new MySQL transaction @@ -75,7 +75,7 @@ This is logged before running the kea-admin command to automatically initialize after getting the schema version initially failed. The full kea-admin command is shown. % DATABASE_PGSQL_ROLLBACK rolling back PostgreSQL database -The code has issued a rollback call. All outstanding transaction will +The code has issued a rollback call. All outstanding transactions will be rolled back and not committed to the database. % DATABASE_PGSQL_ROLLBACK_SAVEPOINT rolling back PostgreSQL database to savepoint: $1 diff --git a/src/lib/dhcpsrv/alloc_engine_messages.mes b/src/lib/dhcpsrv/alloc_engine_messages.mes index a22b19af04..cc81db9688 100644 --- a/src/lib/dhcpsrv/alloc_engine_messages.mes +++ b/src/lib/dhcpsrv/alloc_engine_messages.mes @@ -53,7 +53,7 @@ and the client's packet belongs to one or more classes. There may be several reasons why a lease was not assigned. One of them may be a case when all pools require packet to belong to certain classes and the incoming packet didn't belong to any of them. Another case where this information may be -useful is to point out that the pool reserved to a given class has ran +useful is to point out that the pool reserved to a given class has run out of addresses. When you see this message, you may consider checking your pool size and your classification definitions. @@ -335,7 +335,7 @@ and the client's packet belongs to one or more classes. There may be several reasons why a lease was not assigned. One of them may be a case when all pools require packet to belong to certain classes and the incoming packet didn't belong to any of them. Another case where this information may be -useful is to point out that the pool reserved to a given class has ran +useful is to point out that the pool reserved to a given class has run out of addresses. When you see this message, you may consider checking your pool size and your classification definitions. @@ -410,7 +410,7 @@ and returned. % ALLOC_ENGINE_V6_ALLOC_LEASES_NO_HR no reservations found but leases exist for client %1 Logged at debug log level 40. -This message is logged when the allocation engine is in the process if +This message is logged when the allocation engine is in the process of allocating leases for the client, there are no static reservations, but lease(s) exist for the client. The allocation engine will remove leases which are reserved for other clients, and return all diff --git a/src/lib/dhcpsrv/dhcpsrv_messages.mes b/src/lib/dhcpsrv/dhcpsrv_messages.mes index d5dd3ce7f3..8adf66b24c 100644 --- a/src/lib/dhcpsrv/dhcpsrv_messages.mes +++ b/src/lib/dhcpsrv/dhcpsrv_messages.mes @@ -957,7 +957,7 @@ selection. % DHCPSRV_SUBNET4_SELECT_NO_USABLE_ADDRESS No subnet selected because no suitable address to use for subnet selection was found. Logged at debug log level 40. -A debug message issued when the server was find a suitable address to use for +A debug message issued when the server could not find a suitable address to use for subnet selection. % DHCPSRV_SUBNET6_SELECT_BY_ADDRESS_NO_MATCH No subnet matches address: %1 diff --git a/src/lib/eval/eval_messages.mes b/src/lib/eval/eval_messages.mes index 7dedeb4e3e..14a6f8b5b5 100644 --- a/src/lib/eval/eval_messages.mes +++ b/src/lib/eval/eval_messages.mes @@ -11,7 +11,7 @@ $NAMESPACE isc::dhcp % EVAL_DEBUG_AND %1: Popping %2 and %3 pushing %4 Logged at debug log level 55. This debug message indicates that two values are popped from -the value stack. Then are then combined via logical and and +the value stack. They are then combined via logical and and the result is pushed onto the value stack. # For use with TokenBranch @@ -145,7 +145,7 @@ option or a sub-option as requested in the classification statement. % EVAL_DEBUG_OR %1: Popping %2 and %3 pushing %4 Logged at debug log level 55. This debug message indicates that two values are popped from -the value stack. Then are then combined via logical or and +the value stack. They are then combined via logical or and the result is pushed onto the value stack. The string is displayed in text. diff --git a/src/lib/hooks/hooks_messages.mes b/src/lib/hooks/hooks_messages.mes index 27b288c6e5..eed5513fe4 100644 --- a/src/lib/hooks/hooks_messages.mes +++ b/src/lib/hooks/hooks_messages.mes @@ -104,7 +104,7 @@ has been successfully loaded. % HOOKS_LIBRARY_LOADING loading hooks library %1 Logged at debug log level 40. This is a debug message output just before the specified library is loaded. -If the action is successfully, it will be followed by the +If the action is successful, it will be followed by the HOOKS_LIBRARY_LOADED informational message. % HOOKS_LIBRARY_MULTI_THREADING_COMPATIBLE hooks library %1 reports its multi-threading compatibility as %2 diff --git a/src/lib/log/log_messages.mes b/src/lib/log/log_messages.mes index 855abfa36b..88601d7aeb 100644 --- a/src/lib/log/log_messages.mes +++ b/src/lib/log/log_messages.mes @@ -65,13 +65,13 @@ This error is generated when the compiler finds a $NAMESPACE directive with no arguments. % LOG_NO_MESSAGE_ID line %1: message definition line found without a message ID -Within a message file, message are defined by lines starting with a "%". +Within a message file, messages are defined by lines starting with a "%". The rest of the line should comprise the message ID and text describing the message. This error indicates the message compiler found a line in the message file comprising just the "%" and nothing else. % LOG_NO_MESSAGE_TEXT line %1: line found containing a message ID ('%2') and no text -Within a message file, message are defined by lines starting with a "%". +Within a message file, messages are defined by lines starting with a "%". The rest of the line should comprise the message ID and text describing the message. This error indicates the message compiler found a line in the message file comprising just the "%" and message identification,