./downr1n.sh --downgrade 14.3
[*] Command ran: ./downr1n.sh --downgrade
downr1n | Version 3.0
Created by edwin, thanks palera1n, and all people creator of path file boot
[*] Waiting for devices
[*] Detected normal mode device
Hello, iPhone9,1 on 14.3!
[*] Switching device into recovery mode...
Telling device with udid xxxxxxxxxxxxxxxxxxxxxx to enter recovery mode.
Device is successfully switching to recovery mode.
[/] if your device can't enter into recovery mode please try to force reboot and put it on recovery mode
[*] Waiting for device in recovery mode
[*] Waiting for devices
[*] Detected recovery mode device
[*] Getting device info...
Detected cpid, your cpid is 0x8010
Detected model, your model is d10ap
Detected deviceid, your deviceid is iPhone9,1
[*] To get into DFU mode, you will be guided through 2 steps:
[*] Press any key when ready for DFU mode
Get ready (0)
Release side button, but keep holding volume down (9)
Release side button, but keep holding volume down (2)
[*] Device entered DFU!
[-] we found ipsw/iPhone_4.7_P3_14.3_18C66_Restore.ipsw, do you want to use it ? please write, yes or no
yes
ipsw/iPhone_4.7_P3_14.3_18C66_Restore.ipsw
[*] Checking if the ipsw is for your device
[*] Checking ipsw version
[*] Extracting ipsw, hang on please ...
[*] Got extract the IPSW successfully
[*] Creating ramdisk
[-] Ramdisk is already created so SKIPPING ...
[*] Booting ramdisk
[/] We couldn't get the ipsw curl. we will proceed with -k option with curl
usb_timeout: 5
[IOKit] Waiting for the USB handle with VID: 0x5AC, PID: 0x1227
CPID:8010 CPRV:11 CPFM:03 SCEP:01 BDID:08 ECID:0012293118866326 IBFL:3C SRTG:[iBoot-2696.0.0.1.33]
Found the USB handle.
Stage: RESET
ret: true
[IOKit] Waiting for the USB handle with VID: 0x5AC, PID: 0x1227
CPID:8010 CPRV:11 CPFM:03 SCEP:01 BDID:08 ECID:0012293118866326 IBFL:3C SRTG:[iBoot-2696.0.0.1.33]
Found the USB handle.
Stage: SPRAY
ret: true
[IOKit] Waiting for the USB handle with VID: 0x5AC, PID: 0x1227
CPID:8010 CPRV:11 CPFM:03 SCEP:01 BDID:08 ECID:0012293118866326 IBFL:3C SRTG:[iBoot-2696.0.0.1.33]
Found the USB handle.
Stage: SETUP
ret: true
[IOKit] Waiting for the USB handle with VID: 0x5AC, PID: 0x1227
CPID:8010 CPRV:11 CPFM:03 SCEP:01 BDID:08 ECID:0012293118866326 IBFL:3C SRTG:[iBoot-2696.0.0.1.33]
Found the USB handle.
Stage: PATCH
ret: true
[IOKit] Waiting for the USB handle with VID: 0x5AC, PID: 0x1227
CPID:8010 CPRV:11 CPFM:03 SCEP:01 BDID:08 ECID:0012293118866326 IBFL:3C SRTG:[iBoot-2696.0.0.1.33] PWND:[gaster]
Found the USB handle.
Now you can boot untrusted images.
usb_timeout: 5
[IOKit] Waiting for the USB handle with VID: 0x5AC, PID: 0x1227
Found the USB handle.
[==================================================] 100.0%
[==================================================] 100.0%
[==================================================] 100.0%
[==================================================] 100.0%
[==================================================] 100.0%
bind(): Address already in use
Error creating socket for listen port 2222: Address already in use
[*] Waiting for the ramdisk to finish booting
