Modified canbus holder for BTT CANBUS connectors.
They are coming in 3 different connectors. Now you should probably get the bigger one.
It has changed in terms of internal wire for the power, seems to be 18 awg now.
But the connector is different and since its needed a modified version of the Canbus Cable holder.
I had to slightly retouch the CW2 bridge, so that it matches better with the USB-c and therefore the entire assembly of the cable holder.
I have also reinforced the holding, by putting two screws there between the Bridge and the Connector Holder , so that it will not turn around.
You will need to file a bit after the 3d printing, but only on this face :
