CISCO-WAN-CES-RSRC-PART-MIB-V1SMI.my

-- MIB file created 04-Jun-2003 18:09:11, by
--   SMICng version 2.2.11-beta(PRO)(Solaris), January 20, 2001. Enterprise key cisco.com

CISCO-WAN-CES-RSRC-PART-MIB DEFINITIONS ::= BEGIN

-- From file: "CISCO-WAN-CES-RSRC-PART-MIB.my"
-- Compile options "4 7 F H N W 03 06 0B 0G 0N 0T"

IMPORTS
    cesmPort
            FROM CISCO-WAN-CES-PORT-MIB
    ciscoWan
            FROM CISCOWAN-SMI
    OBJECT-TYPE
            FROM RFC-1212;

ciscoWanCesRsrcPartMIB OBJECT IDENTIFIER ::= { ciscoWan 41 }
-- MODULE-IDENTITY
--  LastUpdated
--    200209030000Z
--  OrgName
--    Cisco Systems, Inc.
--  ContactInfo
--           Cisco Systems
--            Customer Service
--    
--    Postal: 170 W Tasman Drive
--            San Jose, CA  95134
--            USA
--    
--            Tel: +1 800 553-NETS
--    
--    E-mail: cs-wanatm@cisco.com
--  Descr
--    The mib module to configure the resource
--    partition on Circuit Emulation Service(CES)
--    ports. This is applicable for service modules
--    providing the Circuit Emulation Services.
--  RevDate
--    200209030000Z
--  RevDescr
--    Initial version of the MIB.
--    
--    The content of this MIB was originally available
--    in CISCO-WAN-AXIPOP-MIB defined using SMIv1.
--    The applicable objects from CISCO-WAN-AXIPOP-MIB
--    are defined using SMIv2 in this MIB. Also the
--    descriptions of some of the objects have been 
--    modified.

cesmPortCnfResPartGrp OBJECT IDENTIFIER ::= { cesmPort 2 }
cwcRsrcPartMIBConformance OBJECT IDENTIFIER ::= { ciscoWanCesRsrcPartMIB 2 }
cwcRsrcPartMIBCompliances OBJECT IDENTIFIER ::= { cwcRsrcPartMIBConformance 1 }
cwcRsrcPartMIBGroups OBJECT IDENTIFIER ::= { cwcRsrcPartMIBConformance 2 }

cesmPortCnfResPartGrpTable OBJECT-TYPE
    SYNTAX SEQUENCE OF CesmPortCnfResPartGrpEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "This table is for configuring the resource partition 
        parameters. "
    ::= { cesmPortCnfResPartGrp 1 }

cesmPortCnfResPartGrpEntry OBJECT-TYPE
    SYNTAX CesmPortCnfResPartGrpEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "An entry for a resource partition. A resource
               partition have to be created before connections
               can be added to the logical ports."
    INDEX { cesmResPartPortNum, cesmResPartCtrlrNum }
    ::= { cesmPortCnfResPartGrpTable 1 }

CesmPortCnfResPartGrpEntry ::= SEQUENCE {
    cesmResPartPortNum INTEGER,
    cesmResPartCtrlrNum INTEGER,
    cesmResPartRowStatus INTEGER,
    cesmResPartNumOfLcnAvail INTEGER,
    cesmResPartLcnLow INTEGER,
    cesmResPartLcnHigh INTEGER,
    cesmResPartIngrPctBW INTEGER,
    cesmResPartEgrPctBW INTEGER,
    cesmResPartCtrlrID INTEGER
    }

cesmResPartPortNum OBJECT-TYPE
    SYNTAX INTEGER(1..2048)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The value of this object identifies the CES port.
        The value of this object must be same as the value
        of 'cesPortNum' from cesmPortCnfGrpTable."
    ::= { cesmPortCnfResPartGrpEntry 1 }

cesmResPartCtrlrNum OBJECT-TYPE
    SYNTAX INTEGER {
        par(1),
        pnni(2),
        tag(3)
        }
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "This object identifies the controller
        which can be used for accessing the resources.
        
         The possible values are :
           par(1) : Portable Auto Route controller.
                  : This value is applicable in Release 1.x.
        
           pnni(2): PNNI  Controller.
                  : This value is applicable in Release 2.x.
        
           tag(3) : MPLS(Formerly known as Tag Switch)Controller"
    ::= { cesmPortCnfResPartGrpEntry 2 }

cesmResPartRowStatus OBJECT-TYPE
    SYNTAX INTEGER {
        add(1),
        del(2),
        mod(3)
        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "This object is used for adding/deleting/modifying
        resource partition on a CES port.
        
        In MGX Release 1.x:
            To add an entry, this object should be set to 
            add(1), value for other objects should not be
            specified. 
        
        In MGX Release 2.x:
            To add an entry, this object should be set to add(1).
        
        To delete an entry, this object has to be set to del(2).
        
        The resource partition can be deleted only after
        deleting all the connections (LCNs)."
    ::= { cesmPortCnfResPartGrpEntry 3 }

cesmResPartNumOfLcnAvail OBJECT-TYPE
    SYNTAX INTEGER(0..2048)
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "This represents number of LCNs available for this
        controller and this port.
        In CESM-T3/E3 and 8-T1/E1,this value is 1."
    ::= { cesmPortCnfResPartGrpEntry 4 }

cesmResPartLcnLow OBJECT-TYPE
    SYNTAX INTEGER(1..2048)
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "This represents low end of reserved LCN
        In CESM-8T1/E1 and T3/E3, this refers to the
        logical port."
    ::= { cesmPortCnfResPartGrpEntry 5 }

cesmResPartLcnHigh OBJECT-TYPE
    SYNTAX INTEGER(1..2048)
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "This represents high end of reserved LCN
        In CESM-8T1/E1 and T3/E3, this refers to the
        logical port."
    ::= { cesmPortCnfResPartGrpEntry 6 }

cesmResPartIngrPctBW OBJECT-TYPE
    SYNTAX INTEGER(0..100)
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The percentage of total ingress bandwidth reserved.
         In CESM-8T1/E1 and T3/E3, as
         there is only one LCN per port and it could be
         used by only one controller,this value is
         100% for that controller."
    ::= { cesmPortCnfResPartGrpEntry 7 }

cesmResPartEgrPctBW OBJECT-TYPE
    SYNTAX INTEGER(0..100)
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The percentage of total egress bandwidth reserved 
        In CESM-8T1/E1 and T3/E3, as
        there is only one LCN per port and it could be
        used by only one controller,this value is
        100% for that controller."
    ::= { cesmPortCnfResPartGrpEntry 8 }

cesmResPartCtrlrID OBJECT-TYPE
    SYNTAX INTEGER(1..255)
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "This is the controller identifier for the  resource patition.
        The  default value is set for PNNI controller."
    DEFVAL { 2 }
    ::= { cesmPortCnfResPartGrpEntry 9 }

ciscoWanCesRsrcPartGroup OBJECT IDENTIFIER ::= { cwcRsrcPartMIBGroups 1 }
-- OBJECT-GROUP
--  Status
--    mandatory
--  Descr
--    A collection of objects providing the
--    resource partition configuration on CES
--    ports.
--  objects
--    cesmResPartPortNum, cesmResPartCtrlrNum, cesmResPartRowStatus, 
--    cesmResPartNumOfLcnAvail, cesmResPartLcnLow, 
--    cesmResPartLcnHigh, cesmResPartIngrPctBW, cesmResPartEgrPctBW, 
--    cesmResPartCtrlrID

ciscoWanCesRsrcPartCompliance OBJECT IDENTIFIER ::= { cwcRsrcPartMIBCompliances 1 }
-- MODULE-COMPLIANCE
--  Status
--    mandatory
--  Descr
--    The compliance statement for entities which implement
--    the Broad band Interface Resource Partition MIB.
--  Module
--    >>current<<
--   MandGroup
--    ciscoWanCesRsrcPartGroup


END