CISCO-UDLDP-MIB-V1SMI.my

-- MIB file created 15-Jun-2010 12:50:05, by
--   SMICng version 2.2.11-beta(PRO)(Solaris), January 20, 2001. Enterprise key cisco.com

CISCO-UDLDP-MIB DEFINITIONS ::= BEGIN

-- From file: "CISCO-UDLDP-MIB.my"
-- Compile options "4 7 F H N W 03 06 0B 0G 0N 0T"

IMPORTS
    TruthValue
            FROM SNMPv2-TC-v1
    ifIndex, ifName
            FROM IF-MIB
    ciscoMgmt
            FROM CISCO-SMI
    Gauge
            FROM RFC1155-SMI
    OBJECT-TYPE
            FROM RFC-1212
    TRAP-TYPE
            FROM RFC-1215;

ciscoUdldpMIB OBJECT IDENTIFIER ::= { ciscoMgmt 118 }
-- MODULE-IDENTITY
--  LastUpdated
--    200911090900Z
--  OrgName
--    Cisco Systems, Inc.
--  ContactInfo
--    Cisco Systems
--    Customer Service
--    
--    Postal: 170 W Tasman Drive
--    San Jose, CA  95134
--    USA
--    
--    Tel: +1 800 553-NETS
--    
--    E-mail: cs-lan-switch-snmp@cisco.com
--  Descr
--    Cisco Uni Direction Link Detection Protocol
--    MIB
--  RevDate
--    200911090900Z
--  RevDescr
--    Add ciscoUdldpFastHelloGroup, and
--     ciscoUdldpFastHelloNotificationGroup.
--  RevDate
--    200711270000Z
--  RevDescr
--    Added new object cudldpHelloIntervalExt.
--  RevDate
--    200302210000Z
--  RevDescr
--    Changed enumerated integer labels in the
--    cudldpInterfaceOperStatus object from 
--    'bidirectional' to 'biDirectional' and 
--    'notapplicable' to 'notApplicable'.
--  RevDate
--    200210100000Z
--  RevDescr
--    Added cudldpGlobalMode, cudldpInterfaceAdminMode
--    and cudldpInterfaceOperMode objects. 
--    Removed default values for 
--    cudldpGlobalEnable, cudldpHelloInterval
--    and udldpInterfaceEnable. Deprecated 
--    cudldpGlobalEnable and cudldpInterfaceEnable
--    cudldpInterfaceAggressiveMode objects.
--  RevDate
--    200004100000Z
--  RevDescr
--    Added two UDLDP AggressiveMode objects
--  RevDate
--    9811100000Z
--  RevDescr
--    Initial version of this MIB module.

ciscoUdldpMIBNotifs OBJECT IDENTIFIER ::= { ciscoUdldpMIB 0 }
ciscoUdldpMIBObjects OBJECT IDENTIFIER ::= { ciscoUdldpMIB 1 }
cudldpGlobal    OBJECT IDENTIFIER ::= { ciscoUdldpMIBObjects 1 }
cudldpInterface OBJECT IDENTIFIER ::= { ciscoUdldpMIBObjects 2 }
cudldpFastHello OBJECT IDENTIFIER ::= { ciscoUdldpMIBObjects 3 }
ciscoUdldpMIBConformance OBJECT IDENTIFIER ::= { ciscoUdldpMIB 3 }
ciscoUdldpMIBCompliances OBJECT IDENTIFIER ::= { ciscoUdldpMIBConformance 1 }
ciscoUdldpMIBGroups OBJECT IDENTIFIER ::= { ciscoUdldpMIBConformance 2 }

cudldpGlobalEnable OBJECT-TYPE
    SYNTAX TruthValue
--    Rsyntax INTEGER {
--        true(1),
--        false(2)
--        }
    ACCESS read-write
    STATUS deprecated
    DESCRIPTION
        "This variable is used to
        enable(true)/disable(false) Uni Direction 
        Link Detection Protocol on the device. 
        cudldpGlobalEnable is deprecated  and
        replaced with cudldpGlobalMode."
    ::= { cudldpGlobal 1 }

cudldpHelloInterval OBJECT-TYPE
    SYNTAX INTEGER(7..90)
--  Units
--    seconds
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "Indicates interval in seconds at which each port
        sends a hello packet to all of its neighbors at
        steady state when the link has been identified as
        bidirectional.
        
        For platforms which support cudldpHelloIntervalExt, when 
        cudldpHelloIntervalExt reports a value less than the 
        minimum value reportable by cudldpHelloInterval, then 
        cudldpHelloInterval should report its minimum value of 7."
    ::= { cudldpGlobal 2 }

cudldpGlobalMode OBJECT-TYPE
    SYNTAX INTEGER {
        enable(1),
        disable(2),
        aggressive(3)
        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "Indicates the mode of UDLDP feature on the device.
        enable -- Uni Direction Link Detection Protocol is 
                  enabled on the device.
        
        disable -- Uni Directional Link Detection Protocol is
                   disabled on the device.
        
        aggresive -- Uni Directional Link Detection protocol
                     is enabled in aggressive mode on the
                     device."
    ::= { cudldpGlobal 3 }

cudldpHelloIntervalExt OBJECT-TYPE
    SYNTAX Gauge(1..90)
--  Units
--    seconds
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "Indicates interval in seconds at which each port
        sends a hello packet to all of its neighbors at
        steady state when the link has been identified as
        bidirectional."
    ::= { cudldpGlobal 4 }

cudldpFastHelloLinkFailRptNotifEnable OBJECT-TYPE
    SYNTAX TruthValue
--    Rsyntax INTEGER {
--        true(1),
--        false(2)
--        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "This object specifies whether 
        cudldpFastHelloLinkFailRptNotification is generated by 
        the system.
        
        Setting this object value to 'true' will enable
        generation of cudldpFastHelloLinkFailRptNotification. 
        
        Seting this object value to 'false' will disable
        generation of cudldpFastHelloLinkFailRptNotification."
    ::= { cudldpGlobal 5 }

cudldpFastHelloStatusChangeNotifEnable OBJECT-TYPE
    SYNTAX TruthValue
--    Rsyntax INTEGER {
--        true(1),
--        false(2)
--        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "This object specifies whether 
        cudldpFastHelloStatusChangeNotification is generated by 
        the system.
        
        Setting this object value to 'true' will enable
        generation of cudldpFastHelloStatusChangeNotification. 
        
        Seting this object value to 'false' will disable
        generation of cudldpFastHelloStatusChangeNotification."
    ::= { cudldpGlobal 6 }

cudldpInterfaceTable OBJECT-TYPE
    SYNTAX SEQUENCE OF CudldpInterfaceEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "The (conceptual) table containing the status
        of UDLDP on the device's interfaces."
    ::= { cudldpInterface 1 }

cudldpInterfaceEntry OBJECT-TYPE
    SYNTAX CudldpInterfaceEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "A conceptual row of cudldpInterfaceTable. An
        entry exists for each interface that supports 
        UDLDP."
    INDEX { ifIndex }
    ::= { cudldpInterfaceTable 1 }

CudldpInterfaceEntry ::= SEQUENCE {
    cudldpInterfaceEnable TruthValue,
    cudldpInterfaceOperStatus INTEGER,
    cudldpInterfaceAggressiveMode TruthValue,
    cudldpInterfaceAdminMode INTEGER,
    cudldpInterfaceOperMode INTEGER,
    cudldpIfFastHelloInterval Gauge,
    cudldpIfOperHelloInterval Gauge,
    cudldpIfFastHelloOperStatus INTEGER
    }

cudldpInterfaceEnable OBJECT-TYPE
    SYNTAX TruthValue
--    Rsyntax INTEGER {
--        true(1),
--        false(2)
--        }
    ACCESS read-write
    STATUS deprecated
    DESCRIPTION
        "This variable is used to enable UDLDP on this
        interface.  If cudldpGlobalEnable is set to 
        'false' then this variable has no effect.
         cudldpInterfaceEnable is deprecated  and
         replaced with cudldpInterfaceAdminMode."
    ::= { cudldpInterfaceEntry 1 }

cudldpInterfaceOperStatus OBJECT-TYPE
    SYNTAX INTEGER {
        shutdown(1),
        indeterminant(2),
        biDirectional(3),
        notApplicable(4)
        }
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "This mib object contains the following values,
        which has the meaning as:
        'shutdown'       - An Uni-Direction link  has been 
                           detected and the port has been 
                              disabled.
        'indeterminant' - Uni-Direction Link Detection  
                          protocol has not collected enough
                          information to determine if the 
                          link is bi directional or not.
        'biDirectional' - A bi directional link has been 
                           detected.
        'notApplicable' - Uni-Direction Link Detection 
                          Protocol is disabled."
    ::= { cudldpInterfaceEntry 2 }

cudldpInterfaceAggressiveMode OBJECT-TYPE
    SYNTAX TruthValue
--    Rsyntax INTEGER {
--        true(1),
--        false(2)
--        }
    ACCESS read-write
    STATUS deprecated
    DESCRIPTION
        "An indication of whether the UDLDP aggressive mode
        is enabled on this interface. If the 
        aggressive mode is set to 'true', an active port may 
        be shutdown in case of the abrupt loss of its 
        neighbor(s) because the loss of communication
        (heartbeat) with the neighbor(s) is assumed to be
        caused by a fault; thus, the cudldpInterfaceOperStatus
        of the active port will be 'shutdown'. Instead, when
        the aggressive mode is set to 'false', and if there
        is a loss of communication with the neighbor(s), then
        the cudldpInterfaceOperStatus of the active port
        will be 'indeterminant'. 
        Therefore, this mode is recommended 
        only for links that don't use hubs, media converters 
        or similar devices, and where the unexpected loss of 
        the port's neighbor is not an admissible condition.
        cudldpInterfaceAggressiveMode is deprecated  and
        replaced with cudldpInterfaceAdminMode."
    ::= { cudldpInterfaceEntry 3 }

cudldpInterfaceAdminMode OBJECT-TYPE
    SYNTAX INTEGER {
        enable(1),
        disable(2),
        aggressive(3),
        default(4)
        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "Indicates the Administrative mode of Uni Direction
        Link Detection Protocol Feature configured on this 
        interface.
        
        enable -- Uni Direction Link Detection Protocol is 
                  enabled on this interface.
        
        disable -- Uni Direction Link Detection Protocol is
                   disabled on this interface.
        
        aggressive -- Uni Direction Link Detection protocol
                     is enabled in aggressive mode on this
                     interface.
        
        default -- Whether the Uni Directiona Link Detection 
                   protocol is enabled or not on this interface
                   depends on the object value of 
                   cudldpGlobalMode."
    ::= { cudldpInterfaceEntry 4 }

cudldpInterfaceOperMode OBJECT-TYPE
    SYNTAX INTEGER {
        enable(1),
        disable(2),
        aggressive(3)
        }
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Indicates the operational mode of Uni Direction Link
        Detection Protocol Feature on this interface."
    ::= { cudldpInterfaceEntry 5 }

cudldpIfFastHelloInterval OBJECT-TYPE
    SYNTAX Gauge
--  Units
--    milliseconds
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "This object specifies the fast hello interval at 
         which each port sends a hello packet to all of its 
         neighbors at steady state. By setting this object to 
         a positive value, this interface is enabled to send
         UDLD hello packet at a fast interval as specified by
         this object value. 
        
         Setting this object to zero value, this interface is 
         disabled to send UDLD hello packet at fast interval.
         Instead, the interface will send the UDLD hello packet
         at the interval as specified by cudldpHelloInterval object
         (or cudldpHelloIntervalExt if a platform supports
         cudldpHelloIntervalExt)."
    ::= { cudldpInterfaceEntry 6 }

cudldpIfOperHelloInterval OBJECT-TYPE
    SYNTAX Gauge
--  Units
--    milliseconds
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "This object indicates the operational interval value
         at which each port sends a hello packet to all of its 
         neighbors at steady state."
    ::= { cudldpInterfaceEntry 7 }

cudldpIfFastHelloOperStatus OBJECT-TYPE
    SYNTAX INTEGER {
        operational(1),
        notOperational(2)
        }
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "This object indicates the operational status of
         fast hello UDLD at this interface."
    ::= { cudldpInterfaceEntry 8 }

cudldpFastHelloErrorReportEnable OBJECT-TYPE
    SYNTAX TruthValue
--    Rsyntax INTEGER {
--        true(1),
--        false(2)
--        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "This object specifies whether error reporting is enabled or 
         disabled when a fast hello UDLD link error is detected.
        
         'true' specifies that when a fast hello UDLD link error 
         is detected, the link remains in its current state and 
         a cudldpFastHelloLinkFailRptNotification event
         will be triggered. 
        
         'false' specifies that when a fast hello UDLD link error is 
         detected, the link will be automatically put in error-disable
         state and no error report will be generated."
    ::= { cudldpFastHello 1 }

cudldpFastHelloMaxPorts OBJECT-TYPE
    SYNTAX Gauge
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "This object indicates the maximum number of interfaces
         that fast hello UDLD can be enabled to run.
        
         When the value of cudldpFastHelloConfigPorts reaches this
         object value, enabling of fast hello UDLDP on additional 
         interface will fail."
    ::= { cudldpFastHello 2 }

cudldpFastHelloConfigPorts OBJECT-TYPE
    SYNTAX Gauge
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "This object indicates the total number of interfaces
         that fast hello UDLD is currently enabled."
    ::= { cudldpFastHello 3 }

cudldpFastHelloOperationalPorts OBJECT-TYPE
    SYNTAX Gauge
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "This object indicates the number of interfaces
         that fast hello UDLD is currently enabled and in operational
         state."
    ::= { cudldpFastHello 4 }

cudldpFastHelloLinkFailRptNotification TRAP-TYPE
-- Reverse mappable trap
    ENTERPRISE ciscoUdldpMIB
    VARIABLES {
        ifName }
--  Status
--    mandatory
    DESCRIPTION
        "This notification is generated when UDLDP detects
         a link failure on a fast hello UDLD link and the value of
         cudldpFastHelloErrorReportEnable is 'true'. ifName 
         identifies the interface where the link failure is 
         detected."
    ::= 1

cudldpFastHelloStatusChangeNotification TRAP-TYPE
-- Reverse mappable trap
    ENTERPRISE ciscoUdldpMIB
    VARIABLES {
        cudldpHelloInterval, cudldpIfFastHelloInterval, 
        cudldpIfOperHelloInterval, cudldpIfFastHelloOperStatus, 
        ifName }
--  Status
--    mandatory
    DESCRIPTION
        "This notification is generated when there is a change
         in the value of cudldpIfFastHelloOperStatus object.
         cudldpHelloInterval provides the hello interval configured
         at the device level. cudldpIfFastHelloInterval provides
         the fast hello interval configured at the interface level.
         cudldpIfOperHelloInterval indicates the hello interval
         that is currently operational at this interface.
         cudldpIfFastHelloOperStatus indicates the operational
         status of UDLD fast hello at this interface. ifName 
         identifies the interface that trigger the generation of
         this notification."
    ::= 2

ciscoUdldpMIBGroup OBJECT IDENTIFIER ::= { ciscoUdldpMIBGroups 1 }
-- OBJECT-GROUP
--  Status
--    deprecated
--  Descr
--    A collection of objects for use with the  Uni Direction
--    Link Detection Protocol.
--  objects
--    cudldpGlobalEnable, cudldpInterfaceEnable, 
--    cudldpInterfaceOperStatus

ciscoUdldpAggreModeOptionalGroup OBJECT IDENTIFIER ::= { ciscoUdldpMIBGroups 2 }
-- OBJECT-GROUP
--  Status
--    deprecated
--  Descr
--    A collection of optional objects providing UDLDP
--    aggressive mode configuration information.
--  objects
--    cudldpInterfaceAggressiveMode, cudldpHelloInterval

ciscoUdldpMIBGroup2 OBJECT IDENTIFIER ::= { ciscoUdldpMIBGroups 3 }
-- OBJECT-GROUP
--  Status
--    mandatory
--  Descr
--    A collection of objects providing Uni Direction
--    Link Detection Protocol information.
--  objects
--    cudldpGlobalMode, cudldpInterfaceAdminMode, 
--    cudldpInterfaceOperMode, cudldpHelloInterval, 
--    cudldpInterfaceOperStatus

ciscoUdldpMIBGroup3 OBJECT IDENTIFIER ::= { ciscoUdldpMIBGroups 4 }
-- OBJECT-GROUP
--  Status
--    mandatory
--  Descr
--    A collection of objects providing Uni Direction
--    Link Detection Protocol information.
--  objects
--    cudldpHelloIntervalExt

ciscoUdldpFastHelloGroup OBJECT IDENTIFIER ::= { ciscoUdldpMIBGroups 5 }
-- OBJECT-GROUP
--  Status
--    mandatory
--  Descr
--    A collection of objects which provides fast hello UDLD 
--     information in the device.
--  objects
--    cudldpIfFastHelloInterval, cudldpIfOperHelloInterval, 
--    cudldpIfFastHelloOperStatus, cudldpFastHelloErrorReportEnable, 
--    cudldpFastHelloLinkFailRptNotifEnable, 
--    cudldpFastHelloStatusChangeNotifEnable, 
--    cudldpFastHelloMaxPorts, cudldpFastHelloConfigPorts, 
--    cudldpFastHelloOperationalPorts

ciscoUdldpFastHelloNotificationGroup OBJECT IDENTIFIER ::= { ciscoUdldpMIBGroups 6 }
-- NOTIFICATION-GROUP
--  Status
--    mandatory
--  Descr
--    A collection of notifications which provides fast hello
--     UDLD notifications support in the device.
--  notifications
--    cudldpFastHelloLinkFailRptNotification, 
--    cudldpFastHelloStatusChangeNotification

ciscoUdldpMIBCompliance OBJECT IDENTIFIER ::= { ciscoUdldpMIBCompliances 1 }
-- MODULE-COMPLIANCE
--  Status
--    deprecated
--  Descr
--    The compliance statement for the CISCO-UDLDP-MIB.
--  Module
--    >>current<<
--   MandGroup
--    ciscoUdldpMIBGroup

ciscoUdldpMIBComplianceRev1 OBJECT IDENTIFIER ::= { ciscoUdldpMIBCompliances 2 }
-- MODULE-COMPLIANCE
--  Status
--    deprecated
--  Descr
--    The compliance statement for the CISCO-UDLDP-MIB.
--  Module
--    >>current<<
--   MandGroup
--    ciscoUdldpMIBGroup
--   OptGroup
--    ciscoUdldpAggreModeOptionalGroup

ciscoUdldpMIBComplianceRev2 OBJECT IDENTIFIER ::= { ciscoUdldpMIBCompliances 3 }
-- MODULE-COMPLIANCE
--  Status
--    deprecated
--  Descr
--    The compliance statement for the CISCO-UDLDP-MIB.
--  Module
--    >>current<<
--   MandGroup
--    ciscoUdldpMIBGroup2
--   ObjVar
--    cudldpGlobalMode
--   ObjVar
--    cudldpInterfaceAdminMode

ciscoUdldpMIBComplianceRev3 OBJECT IDENTIFIER ::= { ciscoUdldpMIBCompliances 4 }
-- MODULE-COMPLIANCE
--  Status
--    deprecated
--  Descr
--    The compliance statement for the CISCO-UDLDP-MIB. This
--     compliance statement is deprecated and superceded by
--     ciscoUdldpMIBComplianceRev4.
--  Module
--    >>current<<
--   MandGroup
--    ciscoUdldpMIBGroup2
--   OptGroup
--    ciscoUdldpMIBGroup3
--   ObjVar
--    cudldpGlobalMode
--   ObjVar
--    cudldpInterfaceAdminMode

ciscoUdldpMIBComplianceRev4 OBJECT IDENTIFIER ::= { ciscoUdldpMIBCompliances 5 }
-- MODULE-COMPLIANCE
--  Status
--    mandatory
--  Descr
--    The compliance statement for the CISCO-UDLDP-MIB.
--  Module
--    >>current<<
--   MandGroup
--    ciscoUdldpMIBGroup2
--   OptGroup
--    ciscoUdldpMIBGroup3
--   OptGroup
--    ciscoUdldpFastHelloGroup
--   OptGroup
--    ciscoUdldpFastHelloNotificationGroup
--   ObjVar
--    cudldpGlobalMode
--   ObjVar
--    cudldpInterfaceAdminMode
--   ObjVar
--    cudldpHelloInterval
--   ObjVar
--    cudldpHelloIntervalExt
--   ObjVar
--    cudldpFastHelloLinkFailRptNotifEnable
--   ObjVar
--    cudldpFastHelloStatusChangeNotifEnable
--   ObjVar
--    cudldpIfFastHelloInterval
--   ObjVar
--    cudldpFastHelloErrorReportEnable


END