CISCO-OPTICAL-PATCH-MIB-V1SMI.my

-- MIB file created 30-Aug-2002 08:57:47, by
--   SMICng version 2.2.11-beta(PRO)(Solaris), January 20, 2001. Enterprise key cisco.com

CISCO-OPTICAL-PATCH-MIB DEFINITIONS ::= BEGIN

-- From file: "CISCO-OPTICAL-PATCH-MIB.my"
-- Compile options "4 7 F H N W 03 06 0B 0G 0N 0T"

IMPORTS
    RowStatus, TimeStamp, TruthValue
            FROM SNMPv2-TC-v1
    ciscoExperiment
            FROM CISCO-SMI
    InterfaceIndex, ifIndex
            FROM IF-MIB
    OBJECT-TYPE
            FROM RFC-1212
    TRAP-TYPE
            FROM RFC-1215;

ciscoOpticalPatchMIB OBJECT IDENTIFIER ::= { ciscoExperiment 67 }
-- MODULE-IDENTITY
--  LastUpdated
--    200203180000Z
--  OrgName
--    Cisco Systems, Inc.
--  ContactInfo
--    Cisco Systems
--     Customer Service
--    
--     Postal: 170 W Tasman Drive
--     San Jose, CA 95134
--    
--     Tel: +1 800 553-NETS
--    
--     E-mail: cs-dwdm@cisco.com
--  Descr
--    This MIB module is used to configure and monitor the network
--    element view of optical patches between two ports or 
--    fibers on the same network element.
--    
--    It is up to the user to keep the provisioned information that
--    is reflected in this MIB module in sync with the actual patches
--    present between ports or fibers on the network element.
--    Provisioning of a patch does not cause a patch to be inserted;
--    it only informs the network element that a patch has been, or
--    is soon to be, added or removed.
--  RevDate
--    200203180000Z
--  RevDescr
--    This revision adds support for patching one interface to two
--     different interfaces in the receive and transmit directions.
--    
--     This revision deprecates the cOPatchInterfaceTable and 
--     replaces it with the new cOPatchIntfTable. This new table
--     includes the cOPatchIntfDirection object along with ifIndex
--     as part of the table index. The cOPatchIntfDirection object
--     identifies whether this interface is patched to another
--     interface within a network element in the receive, transmit
--     or both directions.
--    
--     A new object cOPatchDirOnLowIf is added to the cOPatchTable
--     in order to identify the patch direction relative to the
--     interface with low ifIndex.
--  RevDate
--    200109050000Z
--  RevDescr
--    Initial version of this MIB module.

cOPatchMIBObjects OBJECT IDENTIFIER ::= { ciscoOpticalPatchMIB 1 }
cOPatchMIBNotifications OBJECT IDENTIFIER ::= { ciscoOpticalPatchMIB 2 }
cOPatchMIBConformance OBJECT IDENTIFIER ::= { ciscoOpticalPatchMIB 3 }
cOPatchMIBCompliances OBJECT IDENTIFIER ::= { cOPatchMIBConformance 1 }
cOPatchMIBGroups OBJECT IDENTIFIER ::= { cOPatchMIBConformance 2 }

cOPatchInterfaceTable OBJECT-TYPE
    SYNTAX SEQUENCE OF COPatchInterfaceEntry
    ACCESS not-accessible
    STATUS deprecated
    DESCRIPTION
        "This table lists all interfaces that are provisioned to
        indicate that they are patched to other interfaces on the same
        network element.  The table is used to find patches that
        include a particular interface.
        
        This table is deprecated since it only includes bidirectional
        patches. The new cOPatchIntfTable includes both unidirectional
        patches (in the transmit or receive direction) and
        bidirectional patches."
    ::= { cOPatchMIBObjects 1 }

cOPatchInterfaceEntry OBJECT-TYPE
    SYNTAX COPatchInterfaceEntry
    ACCESS not-accessible
    STATUS deprecated
    DESCRIPTION
        "An entry is created only when an interface is provisioned
        to indicate that it is patched to another interface on the same
        network element (i.e. when the associated entry in the
        cOPatchTable has been created).
        
        An entry is deleted when the interface is removed from a patch,
        or when the patch is deleted from the cOPatchTable."
    INDEX { ifIndex }
    ::= { cOPatchInterfaceTable 1 }

COPatchInterfaceEntry ::= SEQUENCE {
    cOPatchIdentifier INTEGER
    }

cOPatchIdentifier OBJECT-TYPE
    SYNTAX INTEGER(1..2147483547)
    ACCESS read-only
    STATUS deprecated
    DESCRIPTION
        "The value of cOPatchIndex used in the cOPatchTable to identify
        a patch that includes this interface.  The other interface
        included in that patch has an entry in this table with the same
        value of this object, in addition to the entry in the
        cOPatchTable with this value of cOPatchIndex."
    ::= { cOPatchInterfaceEntry 1 }

cOPatchIndexNext OBJECT-TYPE
    SYNTAX INTEGER(0..2147483647)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "This object contains an appropriate value to be used for
        cOPatchIndex when creating entries in the cOPatchTable.  The
        value 0 indicates that no unassigned entries are available.
        To obtain the cOPatchIndex value for a new entry, the manager
        issues a management protocol retrieval operation to obtain the
        current value of this object.
        The agent will modify the value to the next unassigned index,
        when a new row is created in cOPatchTable with the current
        value of this object. After deletion of a row in cOPatchTable
        the agent will determine through its local policy when its
        index value will be made available for reuse."
    ::= { cOPatchMIBObjects 2 }

cOPatchLastChange OBJECT-TYPE
    SYNTAX TimeStamp
--    Rsyntax TimeTicks
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The value of sysUpTime at the time of the last
        creation, deletion or modification of an entry
        in the cOPatchTable. If the cOPatchTable entries has been
        unchanged since the last re-initialization of the local
        network management subsystem, then this object contains a
        zero value."
    ::= { cOPatchMIBObjects 3 }

cOPatchEventType OBJECT-TYPE
    SYNTAX INTEGER {
        create(1),
        delete(2),
        modify(3)
        }
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The event type of the patch.  The use is as follows:
            create(1)
                The value of this object when cOPatchEvent is generated
                 upon creation of a patch.
            delete(2)
                The value of this object when cOPatchEvent is generated
                 upon deletion of a patch.
            modify(3)
                The value of this object when cOPatchEvent is generated
                 upon modification of a patch."
    ::= { cOPatchMIBObjects 4 }

cOPatchTable OBJECT-TYPE
    SYNTAX SEQUENCE OF COPatchEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "This table contains the network element view of optical patches
        between two interfaces on the same network element.
        
        It is up to the user to keep the provisioned information that
        is reflected in this table in sync with the actual patches
        present between interfaces on the network element.
        Provisioning of a patch in this table does not cause a patch to
        be inserted; it only informs the network element that a patch
        has been, or is soon to be, added or removed.
        
        Each entry in the table models a unidirectional or
        bidirectional patch between two interfaces on the same
        network element. When one interface is patched to two
        different interfaces, one in the receive direction and
        the other in the transmit direction, the interface will
        appear in two different entries in the table.
        
        The terms low and high are chosen to represent numerical
        ordering of the two interfaces associated with a patch.  That
        is, the interface with the lower value of ifIndex is termed
        'low', while the other interface associated with the patch is
        termed 'high'."
    ::= { cOPatchMIBObjects 5 }

cOPatchEntry OBJECT-TYPE
    SYNTAX COPatchEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "This entry is used to model a unidirectional or
        bidirectional patch between two interfaces on the same
        network element. 
        
        An entry is created when the network element is provisioned to
        indicate that two interfaces on the network element have been
        patched together using an optical patch cord.
        
        Prior to creating an entry in the table, the manager should
        obtain a unique value of cOPatchIndex by reading the
        cOPatchIndexNext object.  When an entry in the table is
        created, the cOPatchIntfPatchId values in the corresponding
        cOPatchIntfTable rows are filled in by the agent."
    INDEX { cOPatchIndex }
    ::= { cOPatchTable 1 }

COPatchEntry ::= SEQUENCE {
    cOPatchIndex INTEGER,
    cOPatchLowIfIndex InterfaceIndex,
    cOPatchHighIfIndex InterfaceIndex,
    cOPatchType INTEGER,
    cOPatchStatus INTEGER,
    cOPatchCreationTime TimeStamp,
    cOPatchRowStatus RowStatus,
    cOPatchDirOnLowIf INTEGER
    }

cOPatchIndex OBJECT-TYPE
    SYNTAX INTEGER(1..2147483647)
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "A unique value used to identify this patch.  For each
        interface associated with this patch, the agent reports this
        patch index value in the cOPatchIntfPatchId object of the
        corresponding cOPatchIntfTable entries.
        When the value of this index is equal to the current value
        of cOPatchIndexNext, the agent will modify the value of
        cOPatchIndexNext to the next unassigned index."
    ::= { cOPatchEntry 1 }

cOPatchLowIfIndex OBJECT-TYPE
    SYNTAX InterfaceIndex
--    Rsyntax INTEGER(1..2147483647)
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The value of this object is equal to MIB II's ifIndex value of
        the interface for this patch.  The term low implies that this
        interface has the numerically lower ifIndex value than the
        other interface identified in the same cOPatchEntry.
        The value of this object is specified during row creation,
        and can never be changed."
    ::= { cOPatchEntry 2 }

cOPatchHighIfIndex OBJECT-TYPE
    SYNTAX InterfaceIndex
--    Rsyntax INTEGER(1..2147483647)
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The value of this object is equal to MIB II's ifIndex value of
        the interface for this patch.  The term high implies that this
        interface has the numerically higher ifIndex value than the
        other interface identified in the same cOPatchEntry.
        The value of this object is specified during row creation,
        and can never be changed."
    ::= { cOPatchEntry 3 }

cOPatchType OBJECT-TYPE
    SYNTAX INTEGER {
        provisioned(1),
        automatic(2),
        other(3)
        }
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The creation type of the patch.  The use is as follows:
            provisioned(1)
                Provisioned by the user or by a management system
                using the Command Line Interface, SNMP, or other
                means of management access to the network element.
            automatic(2)
                Created automatically by the network element, without
                user or management intervention.  In particular, this
                is used to represent fixed patches due to the presence
                of entities such as optical backplanes."
    ::= { cOPatchEntry 4 }

cOPatchStatus OBJECT-TYPE
    SYNTAX INTEGER {
        noError(1),
        otherError(2),
        interfaceError(3),
        interfaceChannelError(4)
        }
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "This object indicates the error status of the patch.
        The use is as follows:
            noError(1)
                This value indicates a patch with no error.
            otherError(2)
                This value indicates an unknown patch error.
            interfaceError(3)
                This value indicates one or both interfaces are of
                the wrong type for a patch or the two interfaces
                are not supposed to be patched together.
            interfaceChannelError(4)
                This value indicates the frequency channel of the
                two interfaces in this patch entry do not match."
    ::= { cOPatchEntry 5 }

cOPatchCreationTime OBJECT-TYPE
    SYNTAX TimeStamp
--    Rsyntax TimeTicks
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The value of MIB II's sysUpTime object at the time this
        patch was created.  If the current state was
        entered prior to the last re-initialization of the agent then
        this object contains a zero value."
    ::= { cOPatchEntry 6 }

cOPatchRowStatus OBJECT-TYPE
    SYNTAX RowStatus
--    Rsyntax INTEGER {
--        active(1),
--        notInService(2),
--        notReady(3),
--        createAndGo(4),
--        createAndWait(5),
--        destroy(6)
--        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The status of this entry in the cOPatchTable.  This object is
        used to create an entry indicating that two interfaces on the
        network element have been patched together, or to modify or
        delete an existing entry."
    ::= { cOPatchEntry 7 }

cOPatchDirOnLowIf OBJECT-TYPE
    SYNTAX INTEGER {
        lowIfDirReceive(1),
        lowIfDirTransmit(2),
        lowIfDirBoth(3)
        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "In case of an optical interface where the transmitted
        and received signals travel on two different strands of
        fiber, it is possible that each fiber is patched to a
        different interface.  This object identifies the patch
        direction for this entry relative to the interface with
        low ifIndex.
        
        The direction in which the interface with high ifIndex
        is patched can be deduced based on this object value.
        If the interface with low ifIndex is patched in the
        receive direction, the associated high interface has to
        be patched in the transmit direction and vice versa. If
        the low interface is patched in both directions, the
        same should hold true on the interface with high
        ifIndex."
    DEFVAL { lowIfDirBoth }
    ::= { cOPatchEntry 8 }

cOPatchEventEnabled OBJECT-TYPE
    SYNTAX TruthValue
--    Rsyntax INTEGER {
--        true(1),
--        false(2)
--        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "Notifications that a patch between two interfaces is
        created, modified or deleted are enabled if this value
        is set to 'true'."
    DEFVAL { false }
    ::= { cOPatchMIBObjects 6 }

cOPatchIntfTable OBJECT-TYPE
    SYNTAX SEQUENCE OF COPatchIntfEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "This table lists all interfaces that are provisioned to
        indicate that they are patched to other interfaces on the same
        network element.  The table is used to find patches that
        include a particular interface. 
        
        An interface can be patched to another interface in the
        receive direction, the transmit direction or both
        directions. The cOPatchIntfDirection object identifies
        the direction."
    ::= { cOPatchMIBObjects 7 }

cOPatchIntfEntry OBJECT-TYPE
    SYNTAX COPatchIntfEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "An entry is created only when an interface is provisioned
        to indicate that it is patched to another interface on the same
        network element (i.e. when the associated entry in the
        cOPatchTable has been created).
        
        An entry is deleted when the interface is removed from a patch,
        or when the patch is deleted from the cOPatchTable."
    INDEX { ifIndex, cOPatchIntfDirection }
    ::= { cOPatchIntfTable 1 }

COPatchIntfEntry ::= SEQUENCE {
    cOPatchIntfDirection INTEGER,
    cOPatchIntfPatchId INTEGER
    }

cOPatchIntfDirection OBJECT-TYPE
    SYNTAX INTEGER {
        receive(1),
        transmit(2),
        both(3)
        }
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "In case of an optical interface where the transmitted
        and received signals travel on two different strands of
        fiber, it is possible that each fiber is patched to a
        different interface.  For example, the transmit and
        receive fibers of this interface may have unidirectional
        connections to different optical amplifiers.
        
        This object indicates whether this entry describes a
        patch in the receive direction, the transmit direction
        or both directions. If both the transmit and receive
        fibers of this interface are patched to the same
        interface, then this object is set to 'both'. Individual
        entries for 'transmit' and 'receive' should not be
        created in this case."
    ::= { cOPatchIntfEntry 1 }

cOPatchIntfPatchId OBJECT-TYPE
    SYNTAX INTEGER(1..2147483547)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The value of cOPatchIndex used in the cOPatchTable to identify
         a patch that includes this interface.  The other interface
         included in that patch has an entry in this table with the same
         value of this object, in addition to the entry in the
         cOPatchTable with this value of cOPatchIndex."
    ::= { cOPatchIntfEntry 2 }

cOPatchEvent TRAP-TYPE
--?? Non-reverse mappable trap
    ENTERPRISE cOPatchMIBNotifications
    VARIABLES {
        cOPatchLowIfIndex, cOPatchHighIfIndex, cOPatchType, 
        cOPatchStatus, cOPatchEventType }
--  Status
--    mandatory
    DESCRIPTION
        "This notification is generated when ever a patch
        is created, modified or deleted."
    ::= 1

cOPatchInterfaceGroup OBJECT IDENTIFIER ::= { cOPatchMIBGroups 1 }
-- OBJECT-GROUP
--  Status
--    deprecated
--  Descr
--    Object needed to implement Interfaces with
--     Patches.
--  objects
--    cOPatchIdentifier

cOPatchGroup OBJECT IDENTIFIER ::= { cOPatchMIBGroups 2 }
-- OBJECT-GROUP
--  Status
--    deprecated
--  Descr
--    Collection of objects needed to implement
--     Patches.
--  objects
--    cOPatchIndexNext, cOPatchLastChange, cOPatchEventType, 
--    cOPatchEventEnabled, cOPatchLowIfIndex, cOPatchHighIfIndex, 
--    cOPatchType, cOPatchStatus, cOPatchCreationTime, 
--    cOPatchRowStatus

cOPatchIntfGroup OBJECT IDENTIFIER ::= { cOPatchMIBGroups 4 }
-- OBJECT-GROUP
--  Status
--    mandatory
--  Descr
--    Object needed to implement Interfaces with
--     Patches.
--  objects
--    cOPatchIntfPatchId

cOPatchGroup1 OBJECT IDENTIFIER ::= { cOPatchMIBGroups 5 }
-- OBJECT-GROUP
--  Status
--    mandatory
--  Descr
--    Collection of objects needed to implement
--     Patches in transmit, receive or both directions.
--  objects
--    cOPatchIndexNext, cOPatchLastChange, cOPatchEventType, 
--    cOPatchEventEnabled, cOPatchLowIfIndex, cOPatchHighIfIndex, 
--    cOPatchType, cOPatchStatus, cOPatchCreationTime, 
--    cOPatchRowStatus, cOPatchDirOnLowIf

cOPatchNotifyGroup OBJECT IDENTIFIER ::= { cOPatchMIBGroups 3 }
-- NOTIFICATION-GROUP
--  Status
--    mandatory
--  Descr
--    Patch error notifications.
--  notifications
--    cOPatchEvent

cOPatchMIBCompliance OBJECT IDENTIFIER ::= { cOPatchMIBCompliances 1 }
-- MODULE-COMPLIANCE
--  Status
--    deprecated
--  Descr
--    The compliance statement for entities which implement
--    the Cisco Patch MIB
--  Module
--    >>current<<
--   MandGroup
--    cOPatchInterfaceGroup
--   MandGroup
--    cOPatchGroup
--   MandGroup
--    cOPatchNotifyGroup

cOPatchMIBCompliance1 OBJECT IDENTIFIER ::= { cOPatchMIBCompliances 2 }
-- MODULE-COMPLIANCE
--  Status
--    mandatory
--  Descr
--    The compliance statement for entities which implement
--    the Cisco Patch MIB
--  Module
--    >>current<<
--   MandGroup
--    cOPatchIntfGroup
--   MandGroup
--    cOPatchGroup1
--   MandGroup
--    cOPatchNotifyGroup


END