CISCO-MGX82XX-MODULE-RSRC-PART-MIB-V1SMI.my

-- MIB file created 21-Apr-2003 16:47:17, by
--   SMICng version 2.2.11-beta(PRO)(Solaris), January 20, 2001. Enterprise key cisco.com

CISCO-MGX82XX-MODULE-RSRC-PART-MIB DEFINITIONS ::= BEGIN

-- From file: "CISCO-MGX82XX-MODULE-RSRC-PART-MIB.my"
-- Compile options "4 7 F H N W 03 06 0B 0G 0N 0T"

IMPORTS
    cardGeneric
            FROM BASIS-MIB
    ciscoWan
            FROM CISCOWAN-SMI
    OBJECT-TYPE
            FROM RFC-1212;

ciscoMgx82xxModuleRsrcPartMIB OBJECT IDENTIFIER ::= { ciscoWan 73 }
-- MODULE-IDENTITY
--  LastUpdated
--    200304180000Z
--  OrgName
--    Cisco Systems, Inc.
--  ContactInfo
--           Cisco Systems
--                Customer Service
--    
--        Postal: 170 W Tasman Drive
--                San Jose, CA  95134
--                USA
--    
--                Tel: +1 800 553-NETS
--    
--        E-mail: cs-wanatm@cisco.com
--  Descr
--    The MIB module to configure the resource partition
--    on service modules(cards) supported in MGX82xx and
--    MGX88xx products.
--    
--    This MIB is supported in following Service Modules:
--      AUSM (ATM UNI Service Module)
--      CESM (Circuit Emulation Service Module)
--      FRSM (Frame Relay Service Module)
--      VISM (Voice Interworking Service Module)
--      PXM1 (Processor Switch Module)
--    
--    Terminlogies used:
--    
--    LCN  : Logical Connection Number.
--    GLCN : Global LCN.
--    
--    Controller - Software ( and possibly hardware) which manages
--                 topology and network resources.
--    This performs source routing for ent-to-end SVCs,
--                 including general call acceptance GCAC, setup calls
--                 with other controllers.
--              PNNI and MPLS are examples for the Controller.
--  RevDate
--    200304180000Z
--  RevDescr
--    Initial version of the MIB.
--    
--    The content of this MIB was originally available
--    in CISCO-WAN-AXIPOP-MIB defined using SMIv1.
--    The applicable objects from CISCO-WAN-AXIPOP-MIB
--    are defined using SMIv2 in this MIB. Also the
--    descriptions of some of the objects have been 
--    modified.

cardResourcePartition OBJECT IDENTIFIER ::= { cardGeneric 9 }
cmmRsrcPartMIBConformance OBJECT IDENTIFIER ::= { ciscoMgx82xxModuleRsrcPartMIB 2 }
cmmRsrcPartMIBCompliances OBJECT IDENTIFIER ::= { cmmRsrcPartMIBConformance 1 }
cmmRsrcPartMIBGroups OBJECT IDENTIFIER ::= { cmmRsrcPartMIBConformance 2 }

cardLcnPartitionType OBJECT-TYPE
    SYNTAX INTEGER {
        noPartition(1),
        controllerBased(2),
        portControllerBased(3)
        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "This object specifies the type of partition on LCN:
        
         The possible values are:
        
          noPartition(1): all controllers compete for the totoal
                         (G)LCNs limited by the card
        
         controllerBased(2): the total number of (G)LCNs available
                   to each controller is fixed but no reservation on
                   each port. The number for each controller is 
                   specified in the cardResPartGrpTable.
        
         portControllerBased(3): a certain number of (G)LCNs available
                   on each port for each controller is reserved, it is 
                   specified in the port resouce partition table.
        
         NOTE: This object has to be configured before adding any 
               connections. Once a connection is added, this object
               cannot be changed until all of the connections 
               are deleted."
    DEFVAL { noPartition }
    ::= { cardResourcePartition 1 }

cardResPartGrpTable OBJECT-TYPE
    SYNTAX SEQUENCE OF CardResPartGrpEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "This table contains the configuration of all 
        the resource partition(s) that are on the card level, 
        such as (G)LCN (if the object cardLcnPartitionType is 
        configured as controller-based, if not, there is no
        need to configure this table since it'll be useless)."
    ::= { cardResourcePartition 2 }

cardResPartGrpEntry OBJECT-TYPE
    SYNTAX CardResPartGrpEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "An entry in the table. Each entry contains
        number of LCNs available."
    INDEX { cardResPartCtrlrNum }
    ::= { cardResPartGrpTable 1 }

CardResPartGrpEntry ::= SEQUENCE {
    cardResPartCtrlrNum INTEGER,
    cardResPartRowStatus INTEGER,
    cardResPartNumOfLcnAvail INTEGER
    }

cardResPartCtrlrNum OBJECT-TYPE
    SYNTAX INTEGER {
        par(1),
        pnni(2),
        tag(3)
        }
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "This object identifies the controller
        managing the partition.
        
        par(1) -  Portable Auto Route(PAR). This is a VSI Master controller
            implementing Cisco Proprietary protocol for network
            routing and topology in a Network containing only 
        Cisco Switches.
        
        pnni(2) - Private Network-to-Network Interface (PNNI) controller.
        The PNNI protocol is used between private ATM Switches
        and between groups of ATM switches. This protocol is 
        defined for distributing topology information between
        switches and clusters of switches.
        
        tag(3)  - Label(tag) Switch Controller(TSC).The LSC Implements MPLS
            (Multi Protocol Label Switching) protocol. The LSC is 
        a router which is capable of controlling the operation
        of a separate ATM switch so that the two of them 
                   together function as a single ATM-LSR
                   (ATM Label Switch Router).
        The LSC controls the operation of the ATM Switch
        using a 'Switch Control Protocol', which allows the
        LSC to setup and remove cross-connects on the ATM
        switch, to discover the configuration and capabilities
        of the controlled switch, and to gather statistics from
        the controlled switch."
    ::= { cardResPartGrpEntry 1 }

cardResPartRowStatus OBJECT-TYPE
    SYNTAX INTEGER {
        add(1),
        del(2),
        mod(3)
        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "This object is used for adding/modifying the
        entries in the table."
    ::= { cardResPartGrpEntry 2 }

cardResPartNumOfLcnAvail OBJECT-TYPE
    SYNTAX INTEGER(0..2147483647)
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "This object is configured to reserve the number of 
        (G)LCNs for one controller on a SM card, it can be used
        on any port but the total number of connections added
        on all of the ports for that particular controller
        cannot exceed this number."
    ::= { cardResPartGrpEntry 3 }

cmmRsrcPartGroup OBJECT IDENTIFIER ::= { cmmRsrcPartMIBGroups 1 }
-- OBJECT-GROUP
--  Status
--    mandatory
--  Descr
--    A collection of objects providing the
--    resource partition configuration information
--    in service modules.
--  objects
--    cardLcnPartitionType, cardResPartCtrlrNum, 
--    cardResPartRowStatus, cardResPartNumOfLcnAvail

cmmRsrcPartCompliance OBJECT IDENTIFIER ::= { cmmRsrcPartMIBCompliances 1 }
-- MODULE-COMPLIANCE
--  Status
--    mandatory
--  Descr
--    The compliance statement for entities which implement
--    the Frame Relay Resource Partition MIB.
--  Module
--    >>current<<
--   MandGroup
--    cmmRsrcPartGroup


END