CISCO-LWAPP-DOT11-CLIENT-CCX-REPORTS-MIB-V1SMI.my

-- MIB file created 31-Jan-2011 06:08:53, by
--   SMICng version 2.2.11-beta(PRO)(Solaris), January 20, 2001. Enterprise key cisco.com

CISCO-LWAPP-DOT11-CLIENT-CCX-REPORTS-MIB DEFINITIONS ::= BEGIN

-- From file: "CISCO-LWAPP-DOT11-CLIENT-CCX-REPORTS-MIB.my"
-- Compile options "4 7 F H N W 03 06 0B 0G 0N 0T"

IMPORTS
    RowStatus, MacAddress, TruthValue
            FROM SNMPv2-TC-v1
    cldcClientMacAddress
            FROM CISCO-LWAPP-DOT11-CLIENT-MIB
    ciscoMgmt
            FROM CISCO-SMI
    Gauge
            FROM RFC1155-SMI
    OBJECT-TYPE
            FROM RFC-1212;

ciscoLwappDot11ClientRmMIB OBJECT IDENTIFIER ::= { ciscoMgmt 767 }
-- MODULE-IDENTITY
--  LastUpdated
--    201012130000Z
--  OrgName
--    Cisco Systems Inc.
--  ContactInfo
--    Cisco Systems,
--    Customer Service
--    Postal: 170 West Tasman Drive
--    San Jose, CA  95134
--    USA
--    Tel: +1 800 553-NETS
--    
--    Email: cs-wnbu-snmp@cisco.com
--  Descr
--    This MIB is intended to be implemented on all those
--    devices operating as Central controllers, that
--    terminate the Light Weight Access Point Protocol
--    tunnel from Cisco Light-weight LWAPP Access Points.
--    
--    The relationship between CC and the LWAPP APs
--    can be depicted as follows:
--    
--    +......+     +......+     +......+           +......+
--    +      +     +      +     +      +           +      +
--    +  CC  +     +  CC  +     +  CC  +           +  CC  +
--    +      +     +      +     +      +           +      +
--    +......+     +......+     +......+           +......+
--    ..            .             .                 .
--    ..            .             .                 .
--    .  .            .             .                 .
--    .    .            .             .                 .
--    .      .            .             .                 .
--    .        .            .             .                 .
--    +......+ +......+     +......+      +......+          +......+
--    +      + +      +     +      +      +      +          +      +
--    +  AP  + +  AP  +     +  AP  +      +  AP  +          +  AP  +
--    +      + +      +     +      +      +      +          +      +
--    +......+ +......+     +......+      +......+          +......+
--    .              .             .                 .
--    .  .              .             .                 .
--    .    .              .             .                 .
--    .      .              .             .                 .
--    .        .              .             .                 .
--    +......+ +......+     +......+      +......+          +......+
--    +      + +      +     +      +      +      +          +      +
--    +  MN  + +  MN  +     +  MN  +      +  MN  +          +  MN  +
--    +      + +      +     +      +      +      +          +      +
--    +......+ +......+     +......+      +......+          +......+
--    
--    
--    The LWAPP tunnel exists between the controller and
--    the APs.  The MNs communicate with the APs through
--    the protocol defined by the 802.11 standard.
--    
--    LWAPP APs, upon bootup, discover and join one of the
--    controllers and the controller pushes the configuration,
--    that includes the WLAN parameters, to the LWAPP APs.
--    The APs then encapsulate all the 802.11 frames from
--    wireless clients inside LWAPP frames and forward
--    the LWAPP frames to the controller.
--    
--                       GLOSSARY
--    
--    Access Point ( AP )
--    
--    An entity that contains an 802.11 medium access
--    control ( MAC ) and physical layer ( PHY ) interface
--    and provides access to the distribution services via
--    the wireless medium for associated clients.  
--    
--    LWAPP APs encapsulate all the 802.11 frames in
--    LWAPP frames and sends them to the controller to which
--    it is logically connected.
--    
--    Central Controller ( CC )
--    
--    The central entity that terminates the LWAPP protocol
--    tunnel from the LWAPP APs.  Throughout this MIB,
--    this entity also referred to as 'controller'.
--    
--    Cisco Compatible eXtensions (CCX)
--    
--    Wireless LAN Access Points (APs) manufactured by Cisco
--    Systems have features and capabilities beyond those in
--    related standards (e.g., IEEE 802.11 suite of 
--    standards, Wi-Fi recommendations by WECA, 802.1X 
--    security suite, etc). A number of features provide 
--    higher performance. For example, Cisco AP transmits a 
--    specific Information Element, which the clients adapt 
--    to for enhanced performance. Similarly, a number of 
--    features are implemented by means of proprietary 
--    Information Elements, which Cisco clients use in 
--    specific ways to carry out tasks above and beyond the
--    standard. Other examples of feature categories are 
--    roaming and power saving.
--    
--    Light Weight Access Point Protocol ( LWAPP ) 
--    
--    This is a generic protocol that defines the 
--    communication between the Access Points and the
--    Central Controller.
--    
--    Mobile Node ( MN )
--    
--    A roaming 802.11 wireless device in a wireless
--    network associated with an access point.  The terms  
--    'Mobile node' and 'client' are used interchangeably. 
--    
--    Radio Management (RM)
--    
--    This term refers to managing the 802.11 radio
--    environment to provide the best quality service to
--    to the 802.11 wireless clients. 
--    
--    Service Set Identifier ( SSID ) 
--    
--    SSID is a unique identifier that APs and clients
--    use to identify with each other.  SSID is a simple
--    means of access control and is not for security.
--    The SSID can be any alphanumeric entry up to 32
--    characters.
--    
--    REFERENCE
--    
--    [1] Wireless LAN Medium Access Control ( MAC ) and
--    Physical Layer ( PHY ) Specifications
--    
--    [2] Draft-obara-capwap-lwapp-00.txt, IETF Light 
--    Weight Access Point Protocol
--  RevDate
--    201012130000Z
--  RevDescr
--    Initial version of this MIB module.

ciscoLwapDot11ClientRmMIBNotifs OBJECT IDENTIFIER ::= { ciscoLwappDot11ClientRmMIB 0 }
ciscoLwappDot11ClientRmMIBObjects OBJECT IDENTIFIER ::= { ciscoLwappDot11ClientRmMIB 1 }
ciscoLwappDot11ClientRmMIBConform OBJECT IDENTIFIER ::= { ciscoLwappDot11ClientRmMIB 2 }
cldccrRmReq     OBJECT IDENTIFIER ::= { ciscoLwappDot11ClientRmMIBObjects 1 }
cldccrRmResp    OBJECT IDENTIFIER ::= { ciscoLwappDot11ClientRmMIBObjects 2 }
cldccrRmReqStatus OBJECT IDENTIFIER ::= { ciscoLwappDot11ClientRmMIBObjects 3 }
ciscoLwappDot11ClientRmMIBCompliances OBJECT IDENTIFIER ::= { ciscoLwappDot11ClientRmMIBConform 1 }
ciscoLwappDot11ClientRmMIBGroups OBJECT IDENTIFIER ::= { ciscoLwappDot11ClientRmMIBConform 2 }

CiscoLwappCcxRmReqStatus ::= INTEGER {
        inProgress(1),
        success(2),
        failure(3)
        }
-- TEXTUAL-CONVENTION
--  Status
--    mandatory
--  Descr
--    This attribute is used to initiate/track a request
--    to the ccxv4 client.

cldccrRmReqTable OBJECT-TYPE
    SYNTAX SEQUENCE OF CldccrRmReqEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "This table is used to configure the radio
        measurement request parameters to be sent to the ccxv4 
        clients."
    ::= { cldccrRmReq 1 }

cldccrRmReqEntry OBJECT-TYPE
    SYNTAX CldccrRmReqEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "Each entry represents a conceptual row in this table.
        An entry corresponds to a client for which a certain
        type of report is being fetched."
    INDEX { cldcClientMacAddress }
    ::= { cldccrRmReqTable 1 }

CldccrRmReqEntry ::= SEQUENCE {
    cldccrRmReqReportType OCTET STRING,
    cldccrRmInitiateReq TruthValue,
    cldccrRmReqNumIterations INTEGER,
    cldccrRmReqMeasDuration Gauge,
    cldccrRmReqRowStatus RowStatus
    }

cldccrRmReqReportType OBJECT-TYPE
    SYNTAX OCTET STRING(SIZE(1..2))
        -- BITS are:
        --   channelLoadReport(0)
        --   histogramReport(1)
        --   beaconReport(2)
        --   frameReport(3)
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "This object is set to list of radio measurement
        requests the reports of which will be sent by the 
        ccxv4 client to the controller."
    ::= { cldccrRmReqEntry 1 }

cldccrRmInitiateReq OBJECT-TYPE
    SYNTAX TruthValue
--    Rsyntax INTEGER {
--        true(1),
--        false(2)
--        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "This object is used to send the rm req message to the
        client."
    ::= { cldccrRmReqEntry 2 }

cldccrRmReqNumIterations OBJECT-TYPE
    SYNTAX INTEGER(0..250)
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "This attribute is used to set the number of times
        the rm request will be sent to the client."
    ::= { cldccrRmReqEntry 3 }

cldccrRmReqMeasDuration OBJECT-TYPE
    SYNTAX Gauge(5..32400)
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The time interval between two RM Reqs in seconds."
    ::= { cldccrRmReqEntry 4 }

cldccrRmReqRowStatus OBJECT-TYPE
    SYNTAX RowStatus
--    Rsyntax INTEGER {
--        active(1),
--        notInService(2),
--        notReady(3),
--        createAndGo(4),
--        createAndWait(5),
--        destroy(6)
--        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "This is the status column for this row and is used to
        create and delete specific instances of rows in this 
        table."
    ::= { cldccrRmReqEntry 5 }

cldccrRmHistRepTable OBJECT-TYPE
    SYNTAX SEQUENCE OF CldccrRmHistRepEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "This table contains the noise histogram reports of the clients
        which were queried for the same."
    ::= { cldccrRmResp 1 }

cldccrRmHistRepEntry OBJECT-TYPE
    SYNTAX CldccrRmHistRepEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "There is an entry in the table where entry is identified
        by the client Mac address."
    INDEX { cldcClientMacAddress, cldccrRmHistIndex }
    ::= { cldccrRmHistRepTable 1 }

CldccrRmHistRepEntry ::= SEQUENCE {
    cldccrRmHistIndex Gauge,
    cldccrRmHistRepChannelNumber Gauge,
    cldccrRmHistRepTimeStamp OCTET STRING,
    cldccrRmHistRepRPIDensity0 Gauge,
    cldccrRmHistRepRPIDensity1 Gauge,
    cldccrRmHistRepRPIDensity2 Gauge,
    cldccrRmHistRepRPIDensity3 Gauge,
    cldccrRmHistRepRPIDensity4 Gauge,
    cldccrRmHistRepRPIDensity5 Gauge,
    cldccrRmHistRepRPIDensity6 Gauge,
    cldccrRmHistRepRPIDensity7 Gauge
    }

cldccrRmHistIndex OBJECT-TYPE
    SYNTAX Gauge(0..28)
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "Index which will be the channel number in most
        cases."
    ::= { cldccrRmHistRepEntry 1 }

cldccrRmHistRepChannelNumber OBJECT-TYPE
    SYNTAX Gauge
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Channel number indicates the channel number to which the noise
        histogram Report applies."
    ::= { cldccrRmHistRepEntry 2 }

cldccrRmHistRepTimeStamp OBJECT-TYPE
    SYNTAX OCTET STRING
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Timestamp of the histogram report."
    ::= { cldccrRmHistRepEntry 3 }

cldccrRmHistRepRPIDensity0 OBJECT-TYPE
    SYNTAX Gauge
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "This Field stores the RPI density in power range
        power << -87 db."
    ::= { cldccrRmHistRepEntry 4 }

cldccrRmHistRepRPIDensity1 OBJECT-TYPE
    SYNTAX Gauge
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "This Field stores the RPI  density in power
        range -87 < power << -82."
    ::= { cldccrRmHistRepEntry 5 }

cldccrRmHistRepRPIDensity2 OBJECT-TYPE
    SYNTAX Gauge
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "This Field stores the  RPI density in power
        range -82 < power <<  -77."
    ::= { cldccrRmHistRepEntry 6 }

cldccrRmHistRepRPIDensity3 OBJECT-TYPE
    SYNTAX Gauge
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "This Field stores the  RPI density in power
        range -77 < power << -72."
    ::= { cldccrRmHistRepEntry 7 }

cldccrRmHistRepRPIDensity4 OBJECT-TYPE
    SYNTAX Gauge
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "This Field stores the  RPI density in power
        range -72< Power << -67."
    ::= { cldccrRmHistRepEntry 8 }

cldccrRmHistRepRPIDensity5 OBJECT-TYPE
    SYNTAX Gauge
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "This Field stores the  RPI density in power
        range -67< Power <<  -62."
    ::= { cldccrRmHistRepEntry 9 }

cldccrRmHistRepRPIDensity6 OBJECT-TYPE
    SYNTAX Gauge
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "This Field stores the  RPI density in power
        range -62< Power<<  -57."
    ::= { cldccrRmHistRepEntry 10 }

cldccrRmHistRepRPIDensity7 OBJECT-TYPE
    SYNTAX Gauge
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "This Field stores the RPI density in power
        range -57< Power<< -52."
    ::= { cldccrRmHistRepEntry 11 }

cldccrRmBeaconRepTable OBJECT-TYPE
    SYNTAX SEQUENCE OF CldccrRmBeaconRepEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "This table contains the beacon reports of the clients
        which were queried for the same."
    ::= { cldccrRmResp 2 }

cldccrRmBeaconRepEntry OBJECT-TYPE
    SYNTAX CldccrRmBeaconRepEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "There is an entry in the table where entry is identified
        by the client Mac address."
    INDEX { cldcClientMacAddress, cldccrRmBeaconIndex }
    ::= { cldccrRmBeaconRepTable 1 }

CldccrRmBeaconRepEntry ::= SEQUENCE {
    cldccrRmBeaconIndex Gauge,
    cldccrRmBeaconRptChannelNumber Gauge,
    cldccrRmBeaconRptTimeStamp OCTET STRING,
    cldccrRmBeaconRptPhyType INTEGER,
    cldccrRmBeaconRptReceivedPower Gauge,
    cldccrRmBeaconRptBSSID MacAddress,
    cldccrRmBeaconRptParentTsf OCTET STRING,
    cldccrRmBeaconRptTargetTsf OCTET STRING,
    cldccrRmBeaconRptInterval Gauge,
    cldccrRmBeaconRptCapInfo Gauge
    }

cldccrRmBeaconIndex OBJECT-TYPE
    SYNTAX Gauge(0..28)
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "Index which will be the channel number in most
        cases."
    ::= { cldccrRmBeaconRepEntry 1 }

cldccrRmBeaconRptChannelNumber OBJECT-TYPE
    SYNTAX Gauge
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Channel number indicates the channel number to which the noise
        beacon report applies."
    ::= { cldccrRmBeaconRepEntry 2 }

cldccrRmBeaconRptTimeStamp OBJECT-TYPE
    SYNTAX OCTET STRING
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Timestamp of the beacon report."
    ::= { cldccrRmBeaconRepEntry 3 }

cldccrRmBeaconRptPhyType OBJECT-TYPE
    SYNTAX INTEGER {
        fh(1),
        dss(2),
        unused(3),
        ofdm(4),
        highDataRateDss(5),
        erp(6)
        }
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Phy type indicates the physical
        medium used."
    ::= { cldccrRmBeaconRepEntry 4 }

cldccrRmBeaconRptReceivedPower OBJECT-TYPE
    SYNTAX Gauge(0..250)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "This field indicates the received strength of
        the beacon or probe response frame in dBm."
    ::= { cldccrRmBeaconRepEntry 5 }

cldccrRmBeaconRptBSSID OBJECT-TYPE
    SYNTAX MacAddress
--    Rsyntax OCTET STRING(SIZE(6))
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "This field contains the 6-byte BSSID of the STA that
        transmitted the beacon or probe response frame."
    ::= { cldccrRmBeaconRepEntry 6 }

cldccrRmBeaconRptParentTsf OBJECT-TYPE
    SYNTAX OCTET STRING(SIZE(64))
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "This field is used to store the parent TSF
        Parent TSF contains the lower 4 bytes of the serving APs. 
        TSF value at the time the measuring STA received the beacon
        or probe response frame."
    ::= { cldccrRmBeaconRepEntry 7 }

cldccrRmBeaconRptTargetTsf OBJECT-TYPE
    SYNTAX OCTET STRING(SIZE(64))
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "This field is used to store the Target TSF.
        Target TSF contains the 8-byte TSF value contained in the
        beacon or probe response received by the measuring STA."
    ::= { cldccrRmBeaconRepEntry 8 }

cldccrRmBeaconRptInterval OBJECT-TYPE
    SYNTAX Gauge
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "This field is equal to the 2-byte Beacon Interval
        field in the received beacon or probe response."
    ::= { cldccrRmBeaconRepEntry 9 }

cldccrRmBeaconRptCapInfo OBJECT-TYPE
    SYNTAX Gauge
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "This attribute represents the capability info."
    ::= { cldccrRmBeaconRepEntry 10 }

cldccRmChannelLoadReportTable OBJECT-TYPE
    SYNTAX SEQUENCE OF CldccRmChannelLoadReportEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "This table contains the channel load reports of
        the clients which were queried for the same."
    ::= { cldccrRmResp 3 }

cldccRmChannelLoadReportEntry OBJECT-TYPE
    SYNTAX CldccRmChannelLoadReportEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "There is an entry in the table where entry is
        identified by the client Mac    address."
    INDEX { cldcClientMacAddress, cldccRmChannelLoadReportIndex }
    ::= { cldccRmChannelLoadReportTable 1 }

CldccRmChannelLoadReportEntry ::= SEQUENCE {
    cldccRmChannelLoadReportIndex Gauge,
    cldccRmChannelLoadReportChannelNumber Gauge,
    cldccRmChannelLoadReportTimeStamp OCTET STRING,
    cldccRmChannelLoadReportCCABusyFraction Gauge
    }

cldccRmChannelLoadReportIndex OBJECT-TYPE
    SYNTAX Gauge
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "This indicates the index of the report table."
    ::= { cldccRmChannelLoadReportEntry 1 }

cldccRmChannelLoadReportChannelNumber OBJECT-TYPE
    SYNTAX Gauge
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Channel Number indicates the channel number to which
        the Channel Load Report applies."
    ::= { cldccRmChannelLoadReportEntry 2 }

cldccRmChannelLoadReportTimeStamp OBJECT-TYPE
    SYNTAX OCTET STRING
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Timestamp of the channel load report."
    ::= { cldccRmChannelLoadReportEntry 3 }

cldccRmChannelLoadReportCCABusyFraction OBJECT-TYPE
    SYNTAX Gauge
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "CCA Busy Fraction shall contain the fractional duration
        over which CCA indicated the channel was busy during the
        measurement duration."
    ::= { cldccRmChannelLoadReportEntry 4 }

cldccRmFrameReportTable OBJECT-TYPE
    SYNTAX SEQUENCE OF CldccRmFrameReportEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "This table contains the frame reports of
        the clients which were queried for the same."
    ::= { cldccrRmResp 4 }

cldccRmFrameReportEntry OBJECT-TYPE
    SYNTAX CldccRmFrameReportEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "There is an entry in the table where entry is
        identified by the client Mac address."
    INDEX { cldcClientMacAddress, cldccRmFrameReportElemIndex, cldccRmFrameReportSubElemIndex }
    ::= { cldccRmFrameReportTable 1 }

CldccRmFrameReportEntry ::= SEQUENCE {
    cldccRmFrameReportElemIndex Gauge,
    cldccRmFrameReportSubElemIndex Gauge,
    cldccRmFrameReportChanNumber Gauge,
    cldccRmFrameReportTimeStamp OCTET STRING,
    cldccRmFrameReportTransmitAddr MacAddress,
    cldccRmFrameReportBssid MacAddress,
    cldccRmFrameReportRecvSigPower Gauge,
    cldccRmFrameReportFrameCount Gauge
    }

cldccRmFrameReportElemIndex OBJECT-TYPE
    SYNTAX Gauge
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "This attribute represents the index of
        element index of frame report."
    ::= { cldccRmFrameReportEntry 1 }

cldccRmFrameReportSubElemIndex OBJECT-TYPE
    SYNTAX Gauge
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "This attribute represents the index of
        the sub element in a frame report."
    ::= { cldccRmFrameReportEntry 2 }

cldccRmFrameReportChanNumber OBJECT-TYPE
    SYNTAX Gauge
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "This attribute represents the channel number
        of frame report."
    ::= { cldccRmFrameReportEntry 3 }

cldccRmFrameReportTimeStamp OBJECT-TYPE
    SYNTAX OCTET STRING
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Timestamp of the frame report."
    ::= { cldccRmFrameReportEntry 4 }

cldccRmFrameReportTransmitAddr OBJECT-TYPE
    SYNTAX MacAddress
--    Rsyntax OCTET STRING(SIZE(6))
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "This represents the transmitted address."
    ::= { cldccRmFrameReportEntry 5 }

cldccRmFrameReportBssid OBJECT-TYPE
    SYNTAX MacAddress
--    Rsyntax OCTET STRING(SIZE(6))
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "This represents the bssid."
    ::= { cldccRmFrameReportEntry 6 }

cldccRmFrameReportRecvSigPower OBJECT-TYPE
    SYNTAX Gauge(0..250)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "This field indicates the received strength of
        the beacon or probe response frame in dBm."
    ::= { cldccRmFrameReportEntry 7 }

cldccRmFrameReportFrameCount OBJECT-TYPE
    SYNTAX Gauge(0..250)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "This field indicates the received strength of
        the beacon or probe response frame in dBm."
    ::= { cldccRmFrameReportEntry 8 }

cldccrRmReqStatusTable OBJECT-TYPE
    SYNTAX SEQUENCE OF CldccrRmReqStatusEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "This table is used to get the status for
        each of the reports."
    ::= { cldccrRmReqStatus 1 }

cldccrRmReqStatusEntry OBJECT-TYPE
    SYNTAX CldccrRmReqStatusEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "There is an entry in the table where entry is identified
        by the client Mac address."
    INDEX { cldcClientMacAddress }
    ::= { cldccrRmReqStatusTable 1 }

CldccrRmReqStatusEntry ::= SEQUENCE {
    cldccrRmFrameReqStatus CiscoLwappCcxRmReqStatus,
    cldccrRmHistogramReqStatus CiscoLwappCcxRmReqStatus,
    cldccrRmBeaconReqStatus CiscoLwappCcxRmReqStatus,
    cldccrRmChanLoadReqStatus CiscoLwappCcxRmReqStatus
    }

cldccrRmFrameReqStatus OBJECT-TYPE
    SYNTAX CiscoLwappCcxRmReqStatus
--    Rsyntax INTEGER {
--        inProgress(1),
--        success(2),
--        failure(3)
--        }
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "This attribute is used to initiate/track a frame
        report request to the ccxv4 client."
    ::= { cldccrRmReqStatusEntry 1 }

cldccrRmHistogramReqStatus OBJECT-TYPE
    SYNTAX CiscoLwappCcxRmReqStatus
--    Rsyntax INTEGER {
--        inProgress(1),
--        success(2),
--        failure(3)
--        }
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "This attribute is used to initiate/track a noise histogram
        request to the ccxv4 client."
    ::= { cldccrRmReqStatusEntry 2 }

cldccrRmBeaconReqStatus OBJECT-TYPE
    SYNTAX CiscoLwappCcxRmReqStatus
--    Rsyntax INTEGER {
--        inProgress(1),
--        success(2),
--        failure(3)
--        }
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "This attribute is used to initiate/track a beacon request
        to the ccxv4 client."
    ::= { cldccrRmReqStatusEntry 3 }

cldccrRmChanLoadReqStatus OBJECT-TYPE
    SYNTAX CiscoLwappCcxRmReqStatus
--    Rsyntax INTEGER {
--        inProgress(1),
--        success(2),
--        failure(3)
--        }
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "This attribute is used to initiate/track a channel load request
        to the ccxv4 client."
    ::= { cldccrRmReqStatusEntry 4 }

ciscoLwappDot11ClientRmConfigGroup OBJECT IDENTIFIER ::= { ciscoLwappDot11ClientRmMIBGroups 1 }
-- OBJECT-GROUP
--  Status
--    mandatory
--  Descr
--    This collection of objects represent the
--    reports of the CCX Clients.
--  objects
--    cldccrRmReqReportType, cldccrRmInitiateReq, 
--    cldccrRmReqNumIterations, cldccrRmReqMeasDuration, 
--    cldccrRmReqRowStatus, cldccrRmHistRepChannelNumber, 
--    cldccrRmHistRepTimeStamp, cldccrRmHistRepRPIDensity0, 
--    cldccrRmHistRepRPIDensity1, cldccrRmHistRepRPIDensity2, 
--    cldccrRmHistRepRPIDensity3, cldccrRmHistRepRPIDensity4, 
--    cldccrRmHistRepRPIDensity5, cldccrRmHistRepRPIDensity6, 
--    cldccrRmHistRepRPIDensity7, cldccrRmBeaconRptChannelNumber, 
--    cldccrRmBeaconRptTimeStamp, cldccrRmBeaconRptPhyType, 
--    cldccrRmBeaconRptReceivedPower, cldccrRmBeaconRptBSSID, 
--    cldccrRmBeaconRptParentTsf, cldccrRmBeaconRptTargetTsf, 
--    cldccrRmBeaconRptInterval, cldccrRmBeaconRptCapInfo, 
--    cldccRmChannelLoadReportChannelNumber, 
--    cldccRmChannelLoadReportTimeStamp, 
--    cldccRmChannelLoadReportCCABusyFraction, 
--    cldccRmFrameReportChanNumber, cldccRmFrameReportTimeStamp, 
--    cldccRmFrameReportTransmitAddr, cldccRmFrameReportBssid, 
--    cldccRmFrameReportRecvSigPower, cldccRmFrameReportFrameCount, 
--    cldccrRmFrameReqStatus, cldccrRmHistogramReqStatus, 
--    cldccrRmBeaconReqStatus, cldccrRmChanLoadReqStatus

ciscoLwappDot11ClientRmMibCompliance OBJECT IDENTIFIER ::= { ciscoLwappDot11ClientRmMIBCompliances 1 }
-- MODULE-COMPLIANCE
--  Status
--    mandatory
--  Descr
--    The compliance statement for the SNMP entities that
--    implement the ciscoLwappDot11ClientRmMIB module.
--  Module
--    >>current<<
--   MandGroup
--    ciscoLwappDot11ClientRmConfigGroup


END