CISCO-LWAPP-DOT11-CLIENT-CALIB-MIB-V1SMI.my

-- MIB file created 05-Dec-2011 14:33:44, by
--   SMICng version 2.2.11-beta(PRO)(Solaris), January 20, 2001. Enterprise key cisco.com

CISCO-LWAPP-DOT11-CLIENT-CALIB-MIB DEFINITIONS ::= BEGIN

-- From file: "CISCO-LWAPP-DOT11-CLIENT-CALIB-MIB.my"
-- Compile options "4 7 F H N W 03 06 0B 0G 0N 0T"

IMPORTS
    TimeStamp, MacAddress, TimeInterval, TruthValue, RowStatus, 
    StorageType
            FROM SNMPv2-TC-v1
    cLApSysMacAddress, cLApDot11IfSlotId
            FROM CISCO-LWAPP-AP-MIB
    ciscoMgmt
            FROM CISCO-SMI
    Gauge
            FROM RFC1155-SMI
    OBJECT-TYPE
            FROM RFC-1212;

ciscoLwappDot11ClientCalibMIB OBJECT IDENTIFIER ::= { ciscoMgmt 522 }
-- MODULE-IDENTITY
--  LastUpdated
--    201111250000Z
--  OrgName
--    Cisco Systems Inc.
--  ContactInfo
--    Cisco Systems,
--    Customer Service
--    Postal: 170 West Tasman Drive
--    San Jose, CA  95134
--    USA
--    Tel: +1 800 553-NETS
--    
--    Email: cs-wnbu-snmp@cisco.com
--  Descr
--    This MIB is intended to be implemented on all those
--    devices operating as Central controllers, that
--    terminate the Light Weight Access Point Protocol
--    tunnel from Cisco Light-weight LWAPP Access Points.
--    
--    Information provided by this MIB is about the
--    configuration and monitoring of 802.11 wireless
--    clients in the network.
--    
--    The relationship between CC and the LWAPP APs
--    can be depicted as follows:
--    
--    +......+     +......+     +......+           +......+
--    +      +     +      +     +      +           +      +
--    +  CC  +     +  CC  +     +  CC  +           +  CC  +
--    +      +     +      +     +      +           +      +
--    +......+     +......+     +......+           +......+
--    ..            .             .                 .
--    ..            .             .                 .
--    .  .            .             .                 .
--    .    .            .             .                 .
--    .      .            .             .                 .
--    .        .            .             .                 .
--    +......+ +......+     +......+      +......+          +......+
--    +      + +      +     +      +      +      +          +      +
--    +  AP  + +  AP  +     +  AP  +      +  AP  +          +  AP  +
--    +      + +      +     +      +      +      +          +      +
--    +......+ +......+     +......+      +......+          +......+
--    .              .             .                 .
--    .  .              .             .                 .
--    .    .              .             .                 .
--    .      .              .             .                 .
--    .        .              .             .                 .
--    +......+ +......+     +......+      +......+          +......+
--    +      + +      +     +      +      +      +          +      +
--    +  MN  + +  MN  +     +  MN  +      +  MN  +          +  MN  +
--    +      + +      +     +      +      +      +          +      +
--    +......+ +......+     +......+      +......+          +......+
--    
--    The LWAPP tunnel exists between the controller and
--    the APs.  The MNs communicate with the APs through
--    the protocol defined by the 802.11 standard.
--    
--    LWAPP APs, upon bootup, discover and join one of the
--    controllers and the controller pushes the configuration,
--    that includes the WLAN parameters, to the LWAPP APs.
--    The APs then encapsulate all the 802.11 frames from
--    wireless clients inside LWAPP frames and forward
--    the LWAPP frames to the controller.
--    
--                       GLOSSARY
--    
--    Access Point ( AP )
--    ===================
--    
--    An entity that contains an 802.11 medium access
--    control ( MAC ) and physical layer ( PHY ) interface
--    and provides access to the distribution services via
--    the wireless medium for associated clients.  
--    
--    LWAPP APs encapsulate all the 802.11 frames in
--    LWAPP frames and sends them to the controller to which
--    it is logically connected.
--    
--    Light Weight Access Point Protocol ( LWAPP ) 
--    ============================================
--    
--    This is a generic protocol that defines the 
--    communication between the Access Points and the
--    Central Controller.
--    
--    Mobile Node ( MN )
--    ==================
--    
--    A roaming 802.11 wireless device in a wireless
--    network associated with an access point. Mobile Node,
--    Mobile Station(Ms) and client are used 
--    interchangeably. 
--    
--    Signal to Noise Ratio ( SNR )
--    =============================
--    
--    It is a measure used in science and engineering 
--    that compares the level of a desired signal to 
--    the level of background noise. It is defined as 
--    the ratio of signal power to the noise power. 
--    A ratio higher than 1:1 indicates more signal than 
--    noise. While SNR is commonly quoted for electrical 
--    signals, it can be applied to any form of signal.
--    
--    Received Signal Strength Indicator ( RSSI )
--    ===========================================
--    
--    It is a measurement of the power present in a 
--    received radio signal. 
--    
--    Radio Frequency Identification ( RFID )
--    ===========================================
--    
--    It is a technology that uses radio waves to transfer data 
--    from an electronic tag, called RFID tag or label, attached 
--    to an object, through a reader for the purpose of identifying 
--    and tracking the object. 
--    
--    REFERENCE
--    
--    [1] Wireless LAN Medium Access Control ( MAC ) and
--    Physical Layer ( PHY ) Specifications 
--    
--    [2] Draft-obara-capwap-lwapp-00.txt, IETF Light 
--    Weight Access Point Protocol
--  RevDate
--    201111250000Z
--  RevDescr
--    Added following OBJECT-GROUP:
--    - cLD11ClientCalibClientConfigGroup
--    - cLD11ClientCalibGlobalConfigGroup
--    - cLD11ClientCalibRssiDataSampleGroup
--    Depreated following OBJECT-GROUP:
--    - ciscoLwappDot11ClientCalibMIBConfigGroup
--    Added new compliance:
--    - ciscoLwappDot11ClientCalibMIBComplianceRev1
--  RevDate
--    200702120000Z
--  RevDescr
--    Added ciscoLwappDot11ClientCalibMIBConfigGroupSup1
--    OBJECT-GROUP.
--  RevDate
--    200604110000Z
--  RevDescr
--    Initial version of this MIB module.

ciscoLwappDot11ClientCalibMIBNotifs OBJECT IDENTIFIER ::= { ciscoLwappDot11ClientCalibMIB 0 }
ciscoLwappDot11ClientCalibMIBObjects OBJECT IDENTIFIER ::= { ciscoLwappDot11ClientCalibMIB 1 }
ciscoLwappDot11ClientCalibMIBConform OBJECT IDENTIFIER ::= { ciscoLwappDot11ClientCalibMIB 2 }
cldccConfig     OBJECT IDENTIFIER ::= { ciscoLwappDot11ClientCalibMIBObjects 1 }
cldccStatus     OBJECT IDENTIFIER ::= { ciscoLwappDot11ClientCalibMIBObjects 2 }
cldccRssiSamples OBJECT IDENTIFIER ::= { cldccStatus 1 }
ciscoLwappDot11ClientCalibMIBCompliances OBJECT IDENTIFIER ::= { ciscoLwappDot11ClientCalibMIBConform 1 }
ciscoLwappDot11ClientCalibMIBGroups OBJECT IDENTIFIER ::= { ciscoLwappDot11ClientCalibMIBConform 2 }

cLD11ClientCalibTable OBJECT-TYPE
    SYNTAX SEQUENCE OF CLD11ClientCalibEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "This table represents the calibration for the
        802.11 wireless clients that would associate
        to the APs that have joined this controller.
        
        An entry is created through an explicit management
        action initiated by the administrator through a
        network management station by specifying the
        calibration parameters for a particular client
        identified by cLD11ClientCalibMacAddress and setting
        the RowStatus object to 'createAndGo'.  An existing
        entry is deleted by setting the RowStatus object to 
        'destroy'.  The object cLD11ClientCalibTableMaxEntries
        represents the maximum number of entries in this
        table."
    ::= { cldccConfig 1 }

cLD11ClientCalibEntry OBJECT-TYPE
    SYNTAX CLD11ClientCalibEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "Each entry represents a conceptual row in this
        table and provides the information about the
        calibration parameters for wireless clients."
    INDEX { cLD11ClientCalibMacAddress }
    ::= { cLD11ClientCalibTable 1 }

CLD11ClientCalibEntry ::= SEQUENCE {
    cLD11ClientCalibMacAddress MacAddress,
    cLD11ClientCalibBeaconInterval TimeInterval,
    cLD11ClientCalibRowStatus RowStatus,
    cLD11ClientCalibNumberOfRadios Gauge,
    cLD11ClientCalibNumberOfSamples Gauge,
    cLD11ClientCalibSamplesCollected Gauge,
    cLD11ClientCalibBeaconIntervalExt TimeInterval,
    cLD11ClientCalibStorageType StorageType
    }

cLD11ClientCalibMacAddress OBJECT-TYPE
    SYNTAX MacAddress
--    Rsyntax OCTET STRING(SIZE(6))
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "This object specifies the MAC address of the
        802.11 wireless client for which the 
        calibration parameters in this entry are 
        applicable and uniquely identifies this entry."
    ::= { cLD11ClientCalibEntry 1 }

cLD11ClientCalibBeaconInterval OBJECT-TYPE
    SYNTAX TimeInterval(400..3240000)
--    Rsyntax INTEGER(400..3240000)
--  Units
--    hundredths-seconds
    ACCESS read-write
    STATUS deprecated
    DESCRIPTION
        "This object specifies the time interval, expressed
        here in hundredths of a second at which an AP
        issues radio measurement request messages to a
        client for every SSID.  It is not recommended to
        configure values less than 10 seconds (1000).
        The value configured through this object is
        reflected in the operation of the LWAPP APs only if
        cLD11ClientCalibBeaconEnabled is set to 'true'.
        
        This object has been deprecated and is replaced by the
        object cLD11ClientCalibBeaconIntervalExt."
    DEFVAL { 60000 }
    ::= { cLD11ClientCalibEntry 2 }

cLD11ClientCalibRowStatus OBJECT-TYPE
    SYNTAX RowStatus
--    Rsyntax INTEGER {
--        active(1),
--        notInService(2),
--        notReady(3),
--        createAndGo(4),
--        createAndWait(5),
--        destroy(6)
--        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The object that represents the status of a
        specific instance of a row in this table.
        Initially set to a value of 'createAndGo' by
        the User when a row is created, the status
        as represented by this object is automatically
        set to 'active' if and when the row creation
        is successful.  To delete the specific instance
        of a row, User should set this object to
        'destroy'. To create an entry in this table, it is
        mandatory to specify the cLD11ClientCalibMacAddress,
        cLD11ClientCalibNumberOfRadios (number of radios 
        to be used in the calibration) and 
        cLD11ClientCalibNumberOfSamples (no. of calibration
        samples to be collected per radio)."
    ::= { cLD11ClientCalibEntry 3 }

cLD11ClientCalibNumberOfRadios OBJECT-TYPE
    SYNTAX Gauge
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "This object specifies the number of radios
        used in this calibration."
    ::= { cLD11ClientCalibEntry 4 }

cLD11ClientCalibNumberOfSamples OBJECT-TYPE
    SYNTAX Gauge
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "This object specifies the number of RSSI samples for
        a given radio, used in this calibration."
    ::= { cLD11ClientCalibEntry 5 }

cLD11ClientCalibSamplesCollected OBJECT-TYPE
    SYNTAX Gauge
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "This object indicates the number of
        samples available for this client."
    ::= { cLD11ClientCalibEntry 6 }

cLD11ClientCalibBeaconIntervalExt OBJECT-TYPE
    SYNTAX TimeInterval
--    Rsyntax INTEGER(0..2147483647)
--  Units
--    hundredths-seconds
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "This object specifies the time interval, expressed
        here in hundredths of a second at which an AP
        issues radio measurement request messages to a
        client for every SSID.  It is not recommended to
        configure values less than 10 seconds (1000).
        The value configured through this object is
        reflected in the operation of the LWAPP APs only if
        cLD11ClientCalibBeaconEnabled is set to 'true'."
    DEFVAL { 60000 }
    ::= { cLD11ClientCalibEntry 7 }

cLD11ClientCalibStorageType OBJECT-TYPE
    SYNTAX StorageType
--    Rsyntax INTEGER {
--        other(1),
--        volatile(2),
--        nonVolatile(3),
--        permanent(4),
--        readOnly(5)
--        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "This object specifies the storage type of this
        conceptual row."
    DEFVAL { volatile }
    ::= { cLD11ClientCalibEntry 8 }

cLD11ClientCalibTableMaxEntries OBJECT-TYPE
    SYNTAX Gauge(1..25)
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "This object specifies the maximum number of entries allowed
        in cLD11ClientCalibTable."
    ::= { cldccConfig 2 }

cLD11ClientCalibDataTable OBJECT-TYPE
    SYNTAX SEQUENCE OF CLD11ClientCalibDataEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "This table contains the RSSI data samples
        collected for 802.11 client based on the 
        information provided in the cldccLD11ClientCalibTable.
        Entries are automatically added by the controller
        as and when samples are available.
        This data is used by the NMS for location
        calibration of the 8022.11 clients."
    ::= { cldccRssiSamples 1 }

cLD11ClientCalibDataEntry OBJECT-TYPE
    SYNTAX CLD11ClientCalibDataEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "Each entry represents a conceptual row in this
        table and provides the information about the
        samples for location calibration of a 802.11 
        client."
    INDEX { cLD11ClientCalibMacAddress, cLApSysMacAddress, cLApDot11IfSlotId, clD11ClientCalibDataTimeStamp, clD11ClientCalibDataAntennaIndex }
    ::= { cLD11ClientCalibDataTable 1 }

CLD11ClientCalibDataEntry ::= SEQUENCE {
    clD11ClientCalibDataTimeStamp TimeStamp,
    clD11ClientCalibDataAntennaIndex INTEGER,
    clD11ClientCalibDataRssiValue INTEGER,
    clD11ClientCalibDataTransmitPower INTEGER
    }

clD11ClientCalibDataTimeStamp OBJECT-TYPE
    SYNTAX TimeStamp
--    Rsyntax TimeTicks
--  Units
--    milliseconds
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "This object indicates the time this sample was
        collected. This is the absolute system time that 
        this sample was collected."
    ::= { cLD11ClientCalibDataEntry 1 }

clD11ClientCalibDataAntennaIndex OBJECT-TYPE
    SYNTAX INTEGER {
        antenna1(1),
        antenna2(2)
        }
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "This object indicates the antenna which
        received the probe request from client."
    ::= { cLD11ClientCalibDataEntry 2 }

clD11ClientCalibDataRssiValue OBJECT-TYPE
    SYNTAX INTEGER
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "This object indicates the RSSI value for this
        sample."
    ::= { cLD11ClientCalibDataEntry 3 }

clD11ClientCalibDataTransmitPower OBJECT-TYPE
    SYNTAX INTEGER
--  Units
--    dbm
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "This object indicates the transmit power level for
        a calibrating client."
    ::= { cLD11ClientCalibDataEntry 4 }

cLD11ClientCalibRssiAlgorithm OBJECT-TYPE
    SYNTAX INTEGER {
        unknown(1),
        simple(2),
        average(3)
        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "This object specifies the algorithm used
        to average RSSI and SNR values. 
          unknown(1)  - the algorithm used is unknown
          simple(2)   - simple is used for the calculation
          average(3)  - average RSSI is used as algorithm"
    ::= { cldccConfig 3 }

cLD11ClientCalibRssiClientExpiryTimeout OBJECT-TYPE
    SYNTAX Gauge
--  Units
--    seconds
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "This object specifies the expiry timeout
        for the client."
    ::= { cldccConfig 4 }

cLD11ClientCalibRssiCalibClientExpiryTimeout OBJECT-TYPE
    SYNTAX Gauge
--  Units
--    seconds
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "This object specifies the expiry timeout
        for the calibrating client."
    ::= { cldccConfig 5 }

cLD11ClientCalibRssiRfidTagExpiryTimeout OBJECT-TYPE
    SYNTAX Gauge
--  Units
--    seconds
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "This object specifies the expiry timeout
        for the RFID tags."
    ::= { cldccConfig 6 }

cLD11ClientCalibRssiRogueApExpiryTimeout OBJECT-TYPE
    SYNTAX Gauge
--  Units
--    seconds
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "This object specifies the expiry timeout
        for the Rogue APs."
    ::= { cldccConfig 7 }

cLD11ClientCalibRssiClientHalflifeTimeout OBJECT-TYPE
    SYNTAX Gauge(0..300)
--  Units
--    seconds
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "This object specifies the half-life timeout
        for the client. A value of 0 indicates that
        timeout is disabled."
    ::= { cldccConfig 8 }

cLD11ClientCalibRssiCalibClientHalflifeTimeout OBJECT-TYPE
    SYNTAX Gauge(0..300)
--  Units
--    seconds
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "This object specifies the half-life timeout
        for the calibrating client. A value of 0 indicates
        that timeout is disabled."
    ::= { cldccConfig 9 }

cLD11ClientCalibRssiRfidTagHalflifeTimeout OBJECT-TYPE
    SYNTAX Gauge(0..300)
--  Units
--    seconds
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "This object specifies the half-life timeout
        for the RFID tags. A value of 0 indicates that
        timeout is disabled."
    ::= { cldccConfig 10 }

cLD11ClientCalibRssiRogueApHalflifeTimeout OBJECT-TYPE
    SYNTAX Gauge(0..300)
--  Units
--    seconds
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "This object specifies the half-life timeout
        for the Rogue APs. A value of 0 indicates that
        timeout is disabled."
    ::= { cldccConfig 11 }

cLD11ClientCalibRfidDataEnable OBJECT-TYPE
    SYNTAX TruthValue
--    Rsyntax INTEGER {
--        true(1),
--        false(2)
--        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "This object specifies whether the RFID tag data
        collection is enabled."
    ::= { cldccConfig 12 }

cLD11ClientCalibRfidTimeout OBJECT-TYPE
    SYNTAX Gauge
--  Units
--    seconds
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "This object specifies the RFID tag data timeout."
    ::= { cldccConfig 13 }

cLD11ClientCalibClientMultiBandEnable OBJECT-TYPE
    SYNTAX TruthValue
--    Rsyntax INTEGER {
--        true(1),
--        false(2)
--        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "This object specifies whether calibrating client
        uses both the bands to transmit the requests.
        
          true  - the calibrating client uses both the bands
                  to transmit the requests.
          false - the calibrating client uses single band
                  to transmit the requests."
    ::= { cldccConfig 14 }

cLD11ClientCalibClientRequestEnable OBJECT-TYPE
    SYNTAX TruthValue
--    Rsyntax INTEGER {
--        true(1),
--        false(2)
--        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "This object specifies whether calibrating client
        uses uni band or multi band to transmit the requests.
        
          true  - the calibrating client uses uni band or
                  multi band to transmit the requests.
          false - the calibrating client does not use
                  any band for transmitting requests."
    ::= { cldccConfig 15 }

cLD11ClientCalibClientBurstIntervalEnable OBJECT-TYPE
    SYNTAX TruthValue
--    Rsyntax INTEGER {
--        true(1),
--        false(2)
--        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "This object specifies whether calibrating client
        burst interval is enabled.
        
          true  - the calibrating client burst interval
                  is enabled.
          false - the calibrating client burst interval
                  is disabled."
    ::= { cldccConfig 16 }

cLD11ClientCalibClientBurstInterval OBJECT-TYPE
    SYNTAX Gauge
--  Units
--    seconds
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "This object specifies the burst interval of
        the calibrating client."
    ::= { cldccConfig 17 }

cLD11ClientCalibClientInterval OBJECT-TYPE
    SYNTAX Gauge
--  Units
--    seconds
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "This object specifies the notification interval
        for calibrating clients."
    ::= { cldccConfig 18 }

cLD11ClientCalibRfidInterval OBJECT-TYPE
    SYNTAX Gauge
--  Units
--    seconds
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "This object specifies the notification interval
        for RFID tags."
    ::= { cldccConfig 19 }

cLD11ClientCalibRogueInterval OBJECT-TYPE
    SYNTAX Gauge
--  Units
--    seconds
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "This object specifies the notification interval
        for Rogue APs and Rogue clients."
    ::= { cldccConfig 20 }

ciscoLwappDot11ClientCalibMIBConfigGroup OBJECT IDENTIFIER ::= { ciscoLwappDot11ClientCalibMIBGroups 1 }
-- OBJECT-GROUP
--  Status
--    deprecated
--  Descr
--    This collection of objects specifies the required
--    calibration parameters for the 802.11 wireless 
--    clients. ciscoLwappDot11ClientCalibMIBConfigGroup object
--    is superseded by cLD11ClientCalibClientConfigGroup.
--  objects
--    cLD11ClientCalibBeaconInterval, cLD11ClientCalibRowStatus, 
--    cLD11ClientCalibTableMaxEntries

cLD11ClientCalibClientConfigGroup OBJECT IDENTIFIER ::= { ciscoLwappDot11ClientCalibMIBGroups 2 }
-- OBJECT-GROUP
--  Status
--    mandatory
--  Descr
--    This collection of objects providing the required
--    calibration parameters for the 802.11 wireless
--    clients.
--  objects
--    cLD11ClientCalibRowStatus, cLD11ClientCalibBeaconIntervalExt, 
--    cLD11ClientCalibNumberOfRadios, 
--    cLD11ClientCalibNumberOfSamples, 
--    cLD11ClientCalibSamplesCollected, cLD11ClientCalibStorageType, 
--    cLD11ClientCalibTableMaxEntries

cLD11ClientCalibGlobalConfigGroup OBJECT IDENTIFIER ::= { ciscoLwappDot11ClientCalibMIBGroups 3 }
-- OBJECT-GROUP
--  Status
--    mandatory
--  Descr
--    This collection of objects providing the required
--    RSSI calibration parameters for the 802.11 wireless 
--    clients.
--  objects
--    cLD11ClientCalibRssiAlgorithm, 
--    cLD11ClientCalibRssiClientExpiryTimeout, 
--    cLD11ClientCalibRssiCalibClientExpiryTimeout, 
--    cLD11ClientCalibRssiRfidTagExpiryTimeout, 
--    cLD11ClientCalibRssiRogueApExpiryTimeout, 
--    cLD11ClientCalibRssiClientHalflifeTimeout, 
--    cLD11ClientCalibRssiCalibClientHalflifeTimeout, 
--    cLD11ClientCalibRssiRfidTagHalflifeTimeout, 
--    cLD11ClientCalibRssiRogueApHalflifeTimeout, 
--    cLD11ClientCalibRfidDataEnable, cLD11ClientCalibRfidTimeout, 
--    cLD11ClientCalibClientMultiBandEnable, 
--    cLD11ClientCalibClientRequestEnable, 
--    cLD11ClientCalibClientBurstIntervalEnable, 
--    cLD11ClientCalibClientBurstInterval, 
--    cLD11ClientCalibClientInterval, cLD11ClientCalibRfidInterval, 
--    cLD11ClientCalibRogueInterval

cLD11ClientCalibRssiDataSampleGroup OBJECT IDENTIFIER ::= { ciscoLwappDot11ClientCalibMIBGroups 4 }
-- OBJECT-GROUP
--  Status
--    mandatory
--  Descr
--    This collection of objects providing the RSSI data
--    samples collected for 802.11 client.
--  objects
--    clD11ClientCalibDataRssiValue, 
--    clD11ClientCalibDataTransmitPower

ciscoLwappDot11ClientCalibMIBCompliance OBJECT IDENTIFIER ::= { ciscoLwappDot11ClientCalibMIBCompliances 1 }
-- MODULE-COMPLIANCE
--  Status
--    deprecated
--  Descr
--    The compliance statement for the SNMP entities that
--    implement this MIB.
--  Module
--    >>current<<
--   MandGroup
--    ciscoLwappDot11ClientCalibMIBConfigGroup

ciscoLwappDot11ClientCalibMIBComplianceRev1 OBJECT IDENTIFIER ::= { ciscoLwappDot11ClientCalibMIBCompliances 2 }
-- MODULE-COMPLIANCE
--  Status
--    mandatory
--  Descr
--    The compliance statement for the SNMP entities that
--    implement this MIB.
--  Module
--    >>current<<
--   MandGroup
--    cLD11ClientCalibClientConfigGroup
--   MandGroup
--    cLD11ClientCalibGlobalConfigGroup
--   MandGroup
--    cLD11ClientCalibRssiDataSampleGroup
--   ObjVar
--    cLD11ClientCalibRowStatus
--   ObjVar
--    cLD11ClientCalibBeaconIntervalExt
--   ObjVar
--    cLD11ClientCalibNumberOfRadios
--   ObjVar
--    cLD11ClientCalibNumberOfSamples
--   ObjVar
--    cLD11ClientCalibStorageType
--   ObjVar
--    cLD11ClientCalibTableMaxEntries
--   ObjVar
--    cLD11ClientCalibRssiAlgorithm
--   ObjVar
--    cLD11ClientCalibRssiClientExpiryTimeout
--   ObjVar
--    cLD11ClientCalibRssiCalibClientExpiryTimeout
--   ObjVar
--    cLD11ClientCalibRssiRfidTagExpiryTimeout
--   ObjVar
--    cLD11ClientCalibRssiRogueApExpiryTimeout
--   ObjVar
--    cLD11ClientCalibRssiClientHalflifeTimeout
--   ObjVar
--    cLD11ClientCalibRssiCalibClientHalflifeTimeout
--   ObjVar
--    cLD11ClientCalibRssiRfidTagHalflifeTimeout
--   ObjVar
--    cLD11ClientCalibRssiRogueApHalflifeTimeout
--   ObjVar
--    cLD11ClientCalibRfidDataEnable
--   ObjVar
--    cLD11ClientCalibRfidTimeout
--   ObjVar
--    cLD11ClientCalibClientMultiBandEnable
--   ObjVar
--    cLD11ClientCalibClientRequestEnable
--   ObjVar
--    cLD11ClientCalibClientBurstIntervalEnable
--   ObjVar
--    cLD11ClientCalibClientBurstInterval
--   ObjVar
--    cLD11ClientCalibClientInterval
--   ObjVar
--    cLD11ClientCalibRfidInterval
--   ObjVar
--    cLD11ClientCalibRogueInterval


END